Prosecution Insights
Last updated: November 04, 2026
Application No. 14/890,295

A METAL ACCUMULATION INHIBITING AND PERFORMANCE ENHANCING SUPPLEMENT AND A SYSTEM FOR DELIVERING THE SUPPLEMENT

Final Rejection §112§OTHER
Filed
Nov 10, 2015
Priority
May 31, 2013 — provisional 61/829,517 +1 more
Examiner
SMITH, JEREMIAH R
Art Unit
1723
Tech Center
1700 — Chemical & Materials Engineering
Assignee
Johan C Fitter
OA Round
19 (Final)
58%
Grant Probability
Moderate
20-21
OA Rounds
0m
Est. Remaining
83%
With Interview

Examiner Intelligence

Grants 58% of resolved cases
58%
Career Allowance Rate
463 granted / 798 resolved
-7.0% vs TC avg
Strong +25% interview lift
Without
With
+24.6%
Interview Lift
resolved cases with interview
Typical timeline
3y 3m
Avg Prosecution
42 currently pending
Career history
856
Total Applications
across all art units

Statute-Specific Performance

§101
0.4%
-39.6% vs TC avg
§103
54.0%
+14.0% vs TC avg
§102
19.4%
-20.6% vs TC avg
§112
20.5%
-19.5% vs TC avg
Black line = Tech Center average estimate • Based on career data from 798 resolved cases

Office Action

§112 §OTHER
DETAILED ACTION Application 14/890295, “A METAL ACCUMULATION INHIBITING AND PERFORMANCE ENHANCING SUPPLEMENT AND A SYSTEM FOR DELIVERING THE SUPPLEMENT”, is the national stage entry of a PCT application filed on 5/30/14 and claims priority from a provisional application filed on 5/31/13. This Office Action on the merits is in response to communication filed on 9/24/26. First Inventor to File Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (B) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 41-48, 52-55 and 59-66 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, or for pre-AIA the applicant regards as the invention. Regarding independent claims 41, 52 and 61, the claims fail to provide a clear-cut indication of the scope of the subject matter embraced by the claim and are thus indefinite. The claims as worded are drawn to a system having at least one performance article [which may take various forms such as a cell container, a negative electrode, a porous insulating sheet, an electrolyte or an encapsulating article] having included therewith a supplement and/or a migratory compound, wherein the quantity of the component is claimed as a critical characteristic, but is characterized by the effect produced by the presence of the system/battery, thereby rendering the quantity to be ambiguous. Moreover, the factor for comparison and evidencing that a sufficient quantity of compound/supplement present includes a broad range of possible improved behaviors of the battery such as reduction in material build-up at the negative electrode, elevated electric potential, reduction in gas evolution, reduction in water consumption, reduction in corrosion, and reduction in self discharge. It is noted that the named properties include those that were known as desirable in the art at the time of invention, such as inhibition of undesirable metal accumulation (see previously presented art rejections). The scope of the structure of the invention not being unambiguously defined, the claims as worded are not found to adequately set forth the metes and bounds of the claimed invention. Additionally, claims 41, 52 and 61 define the claims using method steps, but it is not clear how the recited method steps further limit the claimed performance system having at least one performance article. For example, the claim 41 clause, “the performance system testing confirming the portion of the negative electrode surface barrier-forming molecules formed the barrier over the surface of the at least one negative electrode, by an elevated electric potential of the at least one negative electrode relative to the at least one positive electrode, as demonstrated when the treated cell is at the end of charge or is in a full state of charge, when the at least one positive electrode and the at least one negative electrode of the treated cell are receiving the flow of the electric current from the electric power source, when there is an electric potential upwards of 2.25 volts across the at least one positive electrode and the at least one negative electrode of the treated cell, and when compared to an electric potential of at least one negative electrode relative to at least one positive electrode of an electrochemical cell having facility to be compared or that is adapted to be compared, in use, to the treated cell, and that is substantially equivalent to the treated cell, but that does not include the at least one performance article therewith, the elevated electric potential confirming the supplement or the migratory compound, individually or in the combination, as included with the at least one performance article, comprise the negative electrode surface barrier-forming molecules and the negative electrode surface barrier-forming molecules include the hydrophilic head-aspect and the at least one gas-attracting hydrophobic tail, and the upwards of 2.25 volts between a positive electrode and a negative electrode electric potential elevating quantity of the supplement or of the migratory compound, or of the combination thereof, as included with at least one performance article is an active concentration and an effective treatment quantity, and thereby provide at least one performance enhancement” is defined at least in part method, but it is not clear what structural limitations are implied by the recitation. Similarly, claims 52 (e.g. “wherein the at least one positive electrode and the at least one negative electrode of the treated cell are arranged for and thereby receiving a flow of electric current from an electric power source…”) and 61 (e.g. “shaking and producing the foam quantity, and to confirm the one or more negative electrode surface barrier-forming molecules… by providing the negative electrode surface barrier-forming article with a property of inducing a foam… soaking for a period of time… [etc.]”) include clauses having method limitations for which the implied structure is not readily determinable. Claims 41, 52 and 61 as amended on 9/24/26 add a limitation requiring that “the polymeric material pre-combined with a concentration of the supplement or the migratory compound of between 1% and 40% by weight and thereafter processed into a form suitable for controlled release or timed release of the supplement or the migratory compound, the performance system testable by application of an electric current, that is controlled to be constant, between the at least one positive electrode and negative electrode”. Although this recitation limits the quantity of the supplement or migratory compound to a range of between 1% and 40% by weight, the claim retains the limitations discussed above which further limit the quantity of the supplement or migratory compound, but in an ambiguous manner. In other words, although the added limitation sets forth a maximum possible range of the supplement or migratory compound at 1% to 40% by weight, the entirety of this range does not appear to be readable on the claimed invention because quantity of the supplement or migratory compound must also satisfy the other recited limitations, but as worded, the skilled artisan would not be able to determine if a prior art article would satisfy these limitations. Therefore, although the recitation limits the quantity to a maximum range, the claims remain ambiguous because a skilled artisan could not determine what subset of that range is readable on the claimed invention considering the ambiguous limitations of the claims. In making this determination the Office has considered at least the following factors as suggested by MPEP 2173.05(g): (1) whether there is a clear-cut indication of the scope of the subject matter covered by the claim; (2) whether the language sets forth well-defined boundaries of the invention or only states a problem solved or a result obtained; and (3) whether one of ordinary skill in the art would know from the claim terms what structure or steps are encompassed by the claim. In this case, there is not a clear-cut indication of the scope of subject matter because boundaries of the invention are largely defined in a qualitative fashion, rather than in quantitative or other well-defined manner and are primarily defined only by results obtained, such as enhancement of performance, inhibition of metal accumulation, generation/producing of foam (as to claim 52 and 61) of an electrochemical cell which includes the performance article. These enhanced properties are conditional limitations dependent on various aspects of a system and it is unclear what other elements of the battery [or electrochemical cell] may play a role in attainment of the properties. A skilled artisan at the time of invention would not have known what structure is set forth because the quantity of the compound/component included in the performance system is defined only by implication, leaving excessive ambiguity. Response to Arguments Applicant’s arguments filed on 9/24/26 have been fully considered, but are not persuasive. Applicant’s remarks on pages 15-17 explain why and how the presently claimed invention is described in the instant specification. In response these remarks are accepted and not disputed by the Office. The claims have not been rejected under 35 USC 112a for lacking written description because the claims are found to be adequately supported by the originally filed disclosure. However, the claims are rejected under 35 USC 112b for lacking definiteness, which is a separate consideration. Applicant’s remarks at the end of page 17 suggest that the claims have been amended for the purpose of addressing the issue of quantity leading to ambiguity as alleged by the Office in the indefiniteness rejections. In response, although the amendments are found to set forth a maximum range for the supplement compound, the subsequent and other limitations of the claim appear to further limit the amount of supplement/compound to only a subset of that range by requiring additional properties, behaviors or performance objectives which are achieved do the presence of an appropriate amount of supplement/compound within the range. Since the amount of supplement/compound needed to satisfy those additional requirements is not clear, it is unclear what subset of the 1% to 40% weight range would be readable on the claimed invention. Conclusion Applicant's amendment necessitated the new ground(s) of rejection presented in this Office action. Accordingly, THIS ACTION IS MADE FINAL. See MPEP § 706.07(a). Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action. Any inquiry concerning this communication or earlier communications from the examiner should be directed to JEREMIAH R SMITH whose telephone number is (571)270-7005. The examiner can normally be reached on Mon-Fri: 9 AM-5 PM (EST). Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Milton Cano can be reached on 313-446-4937. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /JEREMIAH R SMITH/Primary Examiner, Art Unit 1723
Read full office action

Prosecution Timeline

Show 59 earlier events
Jan 12, 2026
Response after Non-Final Action
Jan 27, 2026
Final Rejection mailed — §112, §OTHER
May 27, 2026
Response after Non-Final Action
Jun 09, 2026
Request for Continued Examination
Jun 10, 2026
Response after Non-Final Action
Jun 25, 2026
Non-Final Rejection mailed — §112, §OTHER
Sep 24, 2026
Response Filed
Oct 22, 2026
Final Rejection mailed — §112, §OTHER (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12770897
FUEL CELL SYSTEM AND CONTROL METHOD THEREOF
3y 6m to grant Granted Oct 20, 2026
Patent 12738537
COMPOSITE, POLYMER ELECTROLYTE, ELECTROCHEMICAL DEVICE, POLYMER-BASED SOLID-STATE BATTERY, AND ACTUATOR
3y 10m to grant Granted Sep 15, 2026
Patent 12725857
RENEWABLE ENERGY INTEGRATION WITH NATURAL-GAS BASED COMBINED HYDROGEN AND ELECTRICITY PRODUCTION (CHEP) SYSTEM AND METHOD
4y 0m to grant Granted Sep 01, 2026
Patent 12725804
LITHIUM ION SECONDARY BATTERY NEGATIVE ELECTRODE ADDITIVE AND NEGATIVE ELECTRODE PASTE AND BATTERY INCLUDING SAME
3y 5m to grant Granted Sep 01, 2026
Patent 12725891
BATTERY CELL FOR TESTING INTERNAL SHORT CIRCUIT, AND METHOD FOR TESTING INTERNAL SHORT CIRCUIT OF BATTERY CELL BY USING SAME
2y 7m to grant Granted Sep 01, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

20-21
Expected OA Rounds
58%
Grant Probability
83%
With Interview (+24.6%)
3y 3m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 798 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month