Prosecution Insights
Last updated: November 20, 2026
Application No. 17/292,691

PLASTIC CONTAINER

Non-Final OA §103§112
Filed
May 10, 2021
Priority
Nov 09, 2018 — CH 01384/18 +1 more
Examiner
ALLEN, JEFFREY R
Art Unit
3733
Tech Center
3700 — Mechanical Engineering & Manufacturing
Assignee
Alpla Werke Alwin Lehner GmbH & Co. KG
OA Round
5 (Non-Final)
48%
Grant Probability
Moderate
5-6
OA Rounds
0m
Est. Remaining
75%
With Interview

Examiner Intelligence

Grants 48% of resolved cases
48%
Career Allowance Rate
549 granted / 1136 resolved
-21.7% vs TC avg
Strong +26% interview lift
Without
With
+26.4%
Interview Lift
resolved cases with interview
Typical timeline
3y 2m
Avg Prosecution
32 currently pending
Career history
1190
Total Applications
across all art units

Statute-Specific Performance

§101
0.5%
-39.5% vs TC avg
§103
52.3%
+12.3% vs TC avg
§102
20.7%
-19.3% vs TC avg
§112
22.8%
-17.2% vs TC avg
Black line = Tech Center average estimate • Based on career data from 1136 resolved cases

Office Action

§103 §112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Claim Rejections - 35 USC § 112 Claim 6 is rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Claim 6 requires that the container has a handle, but claim 1 requires that the container is a tube. It is unclear how the container can be a tube and a handle since the original specification describes a handle container and a tube container as different types of containers. Claim Rejections - 35 USC § 103 In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis (i.e., changing from AIA to pre-AIA ) for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status. The following is a quotation of 35 U.S.C. 103 which forms the basis for all obviousness rejections set forth in this Office action: A patent for a claimed invention may not be obtained, notwithstanding that the claimed invention is not identically disclosed as set forth in section 102, if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains. Patentability shall not be negated by the manner in which the invention was made. Claim(s) 1, 4, 7, 8 and 9 is/are rejected under 35 U.S.C. 103 as being unpatentable over Akiyama et al. (US-7115309-B2) in view of Krishnakumar et al. (US-5989661-A). Regarding claims 1, 4, 8 and 9, Akiyama discloses a copolyester container (1, col. 5, lines 4-13) that is stretch blow molded from a preform (col. 1, lines 7-10) comprising a stretched container body (Fig. 1) having a container neck (at 2) attached thereto, the container neck having an outlet opening, and the container body (5) having a second opening closed by a weld seam (col. 4, lines 46-55), wherein the container is comprises of a single layer for easier recycling (Fig. 2), wherein the copolyester of the container includes a copolymer (col. 5, lines 4-13), wherein the container comprises a tube (Fig. 1) having a tube neck (2) and a tube end (7) opposite the tube neck, wherein the outlet opening is situated in a region of the tube neck and the second opening is situated in a region of the tube end and the second opening is sealed by the weld seam (at 8’). Note that the relation of the final container to the upstretched container and the welding and welding temperatures of the preform are being treated as product by process limitations, and prior art container reads on the final structure claimed. Where the claimed and prior art products are identical or substantially identical, or are produced by identical or substantially identical processes, the PTO can require an applicant to prove that the prior art products do not necessarily or inherently possess the characteristics of his claimed product. Whether the rejection is based on “inherency” under 35 USC § 102, on prima facie obviousness” under 35 USC § 103, jointly or alternatively, the burden of proof is the same, and its fairness is evidenced by the PTO' s inability to manufacture products or to obtain and compare prior art products.” [In re Best, 562 F2d 1252, 1255, 195 USPQ 430, 433-4 (CCPA 1977); MPEP §2112.01]. Akiyama fails to teach wherein the copolyester of the container is polyethylene terephthalate (PET) having a copolymer content between 4 wt. % and 10 wt. %, and the copolymer comprises isophthalic acid, diethylene glycol, furan dicarboxylic acid, propylene glycol, or butylene glycol: or wherein the copolyester of the container is polyethylene furanoate (PEF) having a copolymer content below 5 wt. %, wherein the copolymer is terephthalic acid, isophthalic acid or diethylene glycol, propylene glycol, spiroglycol or butylene glycol. Krishnakumar teaches that it is known in the art to manufacture a container with polyethylene terephthalate (PET) having a copolymer content between 4 wt. % and 10 wt. %, and the copolymer is isophthalic acid, diethylene glycol, furan dicarboxylic acid, propylene glycol, or butylene glycol (col. 10, lines 27-36), and the PET is produced from a regenerate (col. 10 lines 65-67). It would have been obvious to one of ordinary skill in the art at the time the invention was made to have manufactured the container with polyethylene terephthalate (PET) having a copolymer content between 4 wt. % and 10 wt. %, and the copolymer is isophthalic acid, diethylene glycol, furan dicarboxylic acid, propylene glycol, or butylene glycol, in order to adjust the durability of the container and since it has been held to be within the general skill of a worker in the art to select a known material on the basis of its suitability for the intended use as a matter of obvious design choice. It would have been obvious to one of ordinary skill in the art at the time the invention was made to have to have manufactured the container with 30% regenerate for recycling purposes and since it has been held to be within the general skill of a worker in the art to select a known material on the basis of its suitability for the intended use as a matter of obvious design choice. Regarding claim 7, Akiyama teaches wherein the weld can with stand strains but fails to specifically teach wherein the weld is 5 mm and can withstand a tensile force of 100 N. It would have been obvious to one of ordinary skill in the art at the time the invention was made to have manufactured the weld to withstand a tensile strength, in order to ensure that the container can be used normally. It would have been obvious to one of ordinary skill in the art at the time the invention was made to have manufactured the weld to be 5 mm, in order to correspond to the container sizer and since such a modification would have been a change in size of an existing component. A change in size is generally recognized as being within the level of ordinary skill in the art. Applicants may rebut a prima facie case of obviousness based on optimization of a variable disclosed in a range in the prior art by showing that the claimed variable was not recognized in the prior art to be a result-effective variable. E.I. Dupont de Nemours & Company v. Synvina C.V., 904 F.3d 996, 1008, 128 USPQ2d 1193, 1202 (Fed. Cir. 2018). ("The idea behind the 'result-effective variable' analysis is straightforward. Our predecessor court reasoned that a person of ordinary skill would not always be motivated to optimize a parameter 'if there is no evidence in the record that the prior art recognized that [that] particular parameter affected the result.' Antonie, 559 F.2d at 620.) For example, in Antonie the claimed device was characterized by a certain ratio, and the prior art did not disclose that ratio and was silent regarding one of the variables in the ratio. Id. at 619. Our predecessor court thus reversed the Board’s conclusion of obviousness. Id. at 620. Antonie described the situation where a 'parameter optimized was not recognized to be a result-effective variable' as an 'exception' to the general principle in Aller that 'the discovery of an optimum value of a variable in a known process is normally obvious.' Id. at 620. Our subsequent cases have confirmed that this exception is a narrow one. … In summarizing the relevant precedent from our predecessor court, we observed in Applied Materials that '[i]n cases in which the disclosure in the prior art was insufficient to find a variable result-effective, there was essentially no disclosure of the relationship between the variable and the result in the prior art.' 692 F.3d at 1297. Likewise, if the prior art does recognize that the variable affects the relevant property or result, then the variable is result-effective. Id. ('A recognition in the prior art that a property is affected by the variable is sufficient to find the variable result-effective.')"). Applicants must articulate why the variable at issue would not have been recognized in the prior art as result-effective. However, it should be noted that after KSR, the presence of a known result-effective variable would be one, but not the only, motivation for a person of ordinary skill in the art to experiment to reach another workable product or process. KSR International Co. v. Teleflex Inc., 550 U.S. 398, 82 USPQ2d 1385 (2007). See subsection II.B above for additional information about consideration of result-effective variables within an obviousness analysis Claim(s) 6 is/are rejected under 35 U.S.C. 103 as being unpatentable over Akiyama and Krishnakumar in view of Vandormael et al. (US-20180117871-A1). Akiyama fails to teach wherein the container has an integral handle formed with a reach-through opening, wherein the weld seam bounds off the reach-through opening by joining a first and second wall end bordering on the reach-through opening. Vandormael teaches that it is known the art to manufacture a container with an integral handle formed with a reach-through opening, wherein a bottom of the container bounds off the reach-through opening by joining a first and second wall end bordering on the reach-through opening (Fig. 2). It would have been obvious to one of ordinary skill in the art at the time the invention was made to have manufactured the container with a handle, in order to make it easier to hold the container. Response to Arguments Applicant's arguments filed 10/13/2026 have been fully considered but they are not persuasive. The claims in this application are given their broadest reasonable interpretation using the plain meaning of the claim language in light of the specification as it would be understood by one of ordinary skill in the art. In this case the tube and the weld structure currently claimed is taught by the structure of the prior art of record. Although the claims are interpreted in light of the specification, limitations from the specification are not read into the claims. See In re Van Geuns, 988 F.2d 1181, 26 USPQ2d 1057 (Fed. Cir. 1993). Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to JEFFREY R ALLEN whose telephone number is (571)270-7426. The examiner can normally be reached 9:00 am - 5:00 pm, Monday-Friday. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Nathan Jenness can be reached at (571)270-5055. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /JEFFREY R ALLEN/ Primary Examiner, Art Unit 3733
Read full office action

Prosecution Timeline

Show 7 earlier events
Oct 21, 2025
Non-Final Rejection mailed — §103, §112
Mar 11, 2026
Applicant Interview (Telephonic)
Mar 12, 2026
Examiner Interview Summary
Apr 21, 2026
Response Filed
Jul 10, 2026
Final Rejection mailed — §103, §112
Oct 13, 2026
Request for Continued Examination
Oct 16, 2026
Response after Non-Final Action
Nov 02, 2026
Non-Final Rejection mailed — §103, §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12790070
REDUCED WEIGHT PACKAGING SYSTEM FOR INDUSTRIAL EQUIPMENT
1y 8m to grant Granted Nov 10, 2026
Patent 12778328
DRINKING VESSEL
2y 9m to grant Granted Nov 03, 2026
Patent 12778705
SHARPS CONTAINER
2y 1m to grant Granted Nov 03, 2026
Patent 12774133
Lid and Method for Producing/Manufacturing Thermoformed Disposable Lid for a Drinking Cup with Integrated Straw Mouthpiece Portion and Multi-Level Punch
4y 7m to grant Granted Oct 27, 2026
Patent 12774137
SECURE LID
2y 7m to grant Granted Oct 27, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

5-6
Expected OA Rounds
48%
Grant Probability
75%
With Interview (+26.4%)
3y 2m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 1136 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month