Prosecution Insights
Last updated: November 20, 2026
Application No. 17/580,646

Non-Aqueous Electrolyte Secondary Battery

Final Rejection §103
Filed
Jan 21, 2022
Priority
Jan 25, 2021 — JP 2021-009490
Examiner
LA RAIA III, LAWRENCE
Art Unit
1727
Tech Center
1700 — Chemical & Materials Engineering
Assignee
Prime Planet Energy & Solutions Inc.
OA Round
6 (Final)
73%
Grant Probability
Favorable
7-8
OA Rounds
0m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 73% — above average
73%
Career Allowance Rate
30 granted / 41 resolved
+8.2% vs TC avg
Strong +37% interview lift
Without
With
+36.7%
Interview Lift
resolved cases with interview
Typical timeline
3y 6m
Avg Prosecution
29 currently pending
Career history
87
Total Applications
across all art units

Statute-Specific Performance

§101
1.1%
-38.9% vs TC avg
§103
53.7%
+13.7% vs TC avg
§102
22.4%
-17.6% vs TC avg
§112
19.4%
-20.6% vs TC avg
Black line = Tech Center average estimate • Based on career data from 41 resolved cases

Office Action

§103
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Claim Status This Office action is in response to the remarks filed on 2/9/2026. Claims 1 and 7 have been amended. Claims 1, 2, 4 and 6-10 are currently pending. Claims 3 and 5 have been cancelled. Response to Arguments Applicant’s arguments with respect to the claims have been considered but are moot because the new ground of rejection does not rely on any reference applied in the prior rejection of record for any teaching or matter specifically challenged in the argument. Applicant’s argument is directed at PARK in view of DOU. The new grounds of rejection now take the teachings of KONISHI et al. into consideration, which is explained in further detail in the new grounds of rejection under §103 detailed below that was necessitated by the amendment. Claim Rejections - 35 USC § 103 The text of those sections of Title 35, U.S. Code not included in this action can be found in a prior Office action. Claims 1, 2, 4, and 6-10 are rejected under 35 U.S.C. 103 as being unpatentable over US 8691445 B2, PARK; in view of US 20210151754, BAEK; in view of JP 2000030693A, KUZUO and in view of CN 20191082473.5 DOU et al. with US 20220185697 A1 used as an English translation and in further view of US 20100081055 A1, KONISHI et al. Regarding claims 1 and 7: PARK discloses a non-aqueous electrolyte secondary battery, comprising: [col 2 line 55] a positive electrode [col 2 line 55] a negative electrode; and [col 3 lines 1-6] an electrolyte solution housed in a case (col 4 line 26) depicted in figure 2. wherein the positive electrode includes a positive electrode active material, in number-based particle size distribution, PNG media_image1.png 357 671 media_image1.png Greyscale PARK figure 1 teaches a bimodal size distribution of active materials in a graph plotting particle size versus percent in a positive activation material mixture having particles of an average particle diameter D50 of 15.1 µm and a second positive activation material having an average particle diameter D50 of 3.5 µm [col 3 lines 47-49]. PARK further teaches [col 4 lines 43-48] a positive electrode having an increased volume density capable of increasing the capacity of a lithium secondary battery. In order to increase the volume density thereof, there is a need for selecting a particle size distribution that is capable of maximizing a packing ratio between positive activation material particles. the positive electrode active material includes a first peak and a second peak, the first peak has a first vertex, the second peak has a second vertex, the first vertex is located on a smaller particle size side from the second vertex, the first peak is attributed to first particles, the second peak is attributed to second particles, PARK [col 4 lines 62-67 thru col 5 lines 1-2] discloses “[t]he weight ratio of the first positive activation material to the second positive activation material may be in a range of from 95:5 to 60:40, or, for example, from 90:10 to 70:30 which is obvious over the claimed range. This difference disclosed by PARK also reads on the limitation that the particles are different. a particle size at the second vertex is three to five times greater than a particle size at the first vertex, each of the first particles and the second particles independently includes secondary particles, each of the secondary particles is an aggregation of primary particles, each of the secondary particles included in the first particles includes a film adhered to a surface of a corresponding primary particle PARK figure 1 shows particle size distribution depicting first and second peaks along with corresponding vertices. PARK does not teach coatings or films on aggregated particles. BAEK [0040] teaches a glassy coating layer may be formed on surfaces of primary particles of the lithium composite transition metal oxide. The positive electrode active material according to an embodiment of the present invention may be a secondary battery formed by agglomeration of the primary particles, wherein the glassy coating layer may be formed on the surfaces of the primary particles and the glassy coating layer may also be formed on the surface of the secondary particle. the film in each of the secondary particles included in the first particles includes a metallic element, the first particles include a first lithium-nickel composite oxide, the second particles include a second lithium-nickel composite oxide, PARK teaches in col 5 lines 24-39 the first positive activation material and the second positive activation material may have the same chemical composition and differ from each other only in their average particle diameters D50 or may differ from each other in chemical composition as well as average particle diameters D50. Neither PARK nor BAEK disclose a Lithium-Nickel composite oxide or each of the secondary particles included in the second particles is free of a film adhered to a surface of a corresponding primary particle, where the first lithium-nickel composite oxide includes Ni, Co and Mn, a composition of the first lithium-nickel composite oxide satisfying relationships of Ni: Co: Mn = a1 : b1 : c1, a1+b1+c1=1, 0 < b1, 0 < c1, and 0.60 ≤ a1 ≤ 0.85, the second lithium-nickel composite oxide includes Ni, Co and Mn, a composition of the second lithium-nickel composite oxide satisfying relationships of Ni: Co: Mn = a2 : b2 : c2, a2+b2+c2=1, 0 < b2, 0 < c2, and 0.45 ≤ a2 ≤ 0.55, and DOU [title] discloses A Positive Electrode Active Material And Preparation Method Thereof, Positive Electrode Plate, Lithium-Ion Secondary Battery, And Battery Module, Battery Pack, And Apparatus Related Thereto DOU [0093] discloses the chemical formula Li1+a[NixCoyMnzMb]O2, 0.5≤x<1, 0≤y<0.3, 0≤z<0.3, 0≤a<0.2, 0<b<0.3, and x+y+z+b=1. When b=0, x=0.8, y=0.1, and z=0.1 LiNi0.8Co0.1Mn0.1O2 satisfies the limitation of the instant claim for the first lithium composite oxide Furthermore, [0093] continues to disclose “[t]he high-nickel positive electrode active material has a high specific capacity characteristic and high structural stability, so that the lithium-ion secondary battery has high capacity performance and energy density, and good room-temperature and high-temperature cycling performance.” DOU [0096] also discloses the chemical formula Li1+c[Nir−dCosMnfM′d]O2, 0.5≤r−d<1, 0≤s<0.3, 0≤f<0.3, 0≤c<0.2, 0<d<0.3, and r +s+t=1. When r-d=0.5, s=0.2, f=0.3 LiNi0.5Co0.2Mn0.3O2 satisfies the limitation of the instant claim for the second lithium composite oxide Furthermore DOU [0097] discloses “Optionally, 0<s<0.3 and 0<t<0.3. [sic] (t and f appear to be used interchangeably assuming from translation) The high-nickel ternary positive electrode active material has a high energy density and good structural stability, and therefore, the battery has a high energy density and long cycling life.” DOU does not disclose coating the active material with a film satisfying the limitation “each of the secondary particles included in the second particles is free of a film adhered to a surface of a corresponding primary particle” and relationships of the following expression (I) and expression (II) are satisfied: PNG media_image2.png 27 86 media_image2.png Greyscale BAEK paragraphs 39 and 41 teaches boron and aluminum used in a coating as a mass fraction. BAEK states a “coating layer, boron and aluminum may be included at a ratio of 0.3 part by weight: 1 part by weight to 0.8 part by weight. Since the content ratio of the boron to the aluminum satisfies the above range, the particle strength may be further improved and the high-temperature life characteristics and high-temperature storage stability may be further improved.”. in the expression (I), C [ppm] represents a mass fraction of the metallic element relative to the first particles, BAEK paragraph 40 teaches that coating may be applied to the primary particles, or to the agglomeration of the primary particle and/or the coating may also be formed on those secondary agglomerated particles. BAEK (paragraphs 14 and 15) also teaches that the addition of the coating increases the strength of the particles, their capacity, and their overall performance, while suppressing gas generation during high-temperature storage. wherein the crystallite size is from 602 Å to 678 Å, and the mass fraction is from 930 ppm to 1072 ppm. BAEK teaches in Paragraph 83 that the Boron is 1000 ppm, and in Paragraph 84 that the Aluminum is 1000ppm. BAEK does not teach crystalline particle size, KUZUO page 5 table 5, teaches crystallite size within range of the limitations of claim 3. i.e., 250 Å to 1490 Å. KUZUO further teaches at the bottom of page 4 of the translation that the size of the primary particles causes small gaps in the aggregated particles allowing better interaction with the electrolyte. and D [Å] represents a crystallite size of the first particles. Neither PARK nor BAEK teach crystallite particles sizes PNG media_image3.png 419 649 media_image3.png Greyscale PNG media_image4.png 324 1032 media_image4.png Greyscale English translation: PNG media_image5.png 556 634 media_image5.png Greyscale “Examples 1-6” and “Comparative examples 1-2” are on the left. Crystallite size is the third column on the top in nm. KUZUO page 5 table 5 teaches crystalline particles in a range of sizes, from 250 Å to 1490 Å shown in the table above. KUZUO further teaches (Paragraph 27) that the range of particle sizes in table 5 achieve a higher capacity and efficiency than the comparative examples. Neither PARK, BAEK, KUZUO or DOU disclose the second particles being different from the first particles, or of a mixing ratio of the first particles to the second particles is 10/90 to 50/50 by mass KONISHI [title] discloses A Cathode Material For Li Ion Secondary Battery And Li Ion Secondary Battery Using The Same where, KONISHI [0013] discloses “a cathode material includes a first cathode active material represented by the composition formula: Lix1Nia1Mnb1Coc1O2, where 0.2 ≤ x1 ≤ 1.2, 0.6 ≤ a1, 0.05 ≤ b1 ≤ 0.3, 0.05 ≤ c1 ≤ 0.3, and having an average primary particle size of not less than 1 µm nor more than 3 µm, and a second cathode active material represented by the composition formula: Li.sub.x2Ni.sub.a2Mn.sub.b2Co.sub.c2O.sub.2, where 0.2 ≤ x2 ≤ 1.2, a2 ≤ 0.5, 0.05 ≤ b2 ≤ 0.5, 0.05 ≤ c2 ≤ 0.5, and having an average primary particle size of not less than 0.05 µm nor more than 0.5 µm.” Which reads on the newly added limitations of the second particles being different from the first particles, or of a mixing ratio of the first particles to the second particles is 10/90 to 50/50 by mass KONISHI [0041] further discloses that “an active material having a larger particle size than the [above] range has a surface area decreased, so that a contact area between the electrolyte and the particles is decreased, which drastically degrades the output characteristics at high rate.” It would have been obvious to one of ordinary skill in the art at the time of the effective filing date to use the Lithium Nickel composite oxides in the molar fraction taught by DOU, in order to create a high-nickel positive electrode active material that has a high specific capacity and high structural stability, so that the lithium-ion secondary battery has high capacity, performance, energy density, and good ambient and high-temperature cycling performance as disclosed by DOU. These particles used in the range of sizes taught by KUZUO with a film on the aggregated primary particles taught by BAEK, that are dispersed in a number-based size distribution inside a battery taught by PARK. This person of ordinary skill would have been motivated to use the size distribution taught by PARK in order to increase the volume density of the active material thereby increasing the battery capacity. Furthermore, this person of ordinary skill would have been motivated to use the film taught by BAEK on the particles taught by KUZUO in order to increase the strength of the particles improving high temperature storage and the battery life of PARK at higher temperatures. Lastly this person of ordinary skill would have been motivated to use the second particles being different from the first particles, or of a mixing ratio of the first particles to the second particles is 10/90 to 50/50 by mass disclosed by KONISHI in order to decrease a contact area between the electrolyte and the particles which drastically degrades the output characteristics at a high rate. Regarding claims 2 and 8, modified PARK discloses the non-aqueous electrolyte secondary battery according to claims 1, and 7 wherein the metallic element includes at least one selected from the group consisting of aluminum, boron, titanium, and yttrium. BAEK paragraph 10, teaches a coating from a group consisting of Boron, Aluminum, Silicon, Titanium and Phosphorus. BAEK [0014] also teaches that the high capacity may be secured, and particle strength may be improved due to the glassy coating layer. It would have been obvious for one of ordinary skill in the art before the effective filing date to have chosen one of elements from this short list in order to coat the core taught by PARK in order to improve the particle strength and capacity. Regarding claims 4, 6, 9, and 10: modified PARK discloses the non-aqueous electrolyte secondary battery according to claims 1, 4, 7, and 9, wherein in the particle size distribution, the first vertex is located within the range of 2 μm to 6 μm (3 µm to 6 µm for claims 6, and 10), and the second vertex is located within the range of 15 μm to 20 μm for claims 4 and 9. BAEK shows in figure 2 the first peak is in range of 0.5 μm to 2 μm and second peak is 7 μm to 50 μm, both ranges overlap the applicant’s ranges. Regarding claim 6, BAEK does not teach a range less than 3 µm for the first vertex, however a prima facie case of obviousness exists where the claimed ranges and prior art ranges do not overlap but are close enough that one skilled in the art would have expected them to have the same properties. Titanium Metals Corp. of America v. Banner, 778 F.2d 775, 227 USPQ 773 (Fed. Cir. 1985) see MPEP 2144.05 I It would have been obvious for one of ordinary skill in the art before the effective filing date to have used routine experimentation in order to arrive at the range claimed in claim 6. The examiner takes the position that a person having ordinary skill in the art would have reasonably expected that the battery’s performance in the prior art range of 0.5 µm up to 2 µm would have been the same as, or similar to, the performance in the claimed range. Conclusion Applicant's amendment necessitated the new ground(s) of rejection presented in this Office action. Accordingly, THIS ACTION IS MADE FINAL. See MPEP § 706.07(a). Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action. Any inquiry concerning this communication or earlier communications from the examiner should be directed to LAWRENCE LA RAIA III whose telephone number is (703)756-5441. The examiner can normally be reached Mon-Thur 6:00am-4:00pm. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Barbara Gilliam can be reached at (571) 272-1330. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. LAWRENCE LA RAIA III Examiner Art Unit 1727 /L.L./Examiner, Art Unit 1727 /BARBARA L GILLIAM/Supervisory Patent Examiner, Art Unit 1727
Read full office action

Prosecution Timeline

Show 14 earlier events
Feb 09, 2026
Request for Continued Examination
Feb 12, 2026
Response after Non-Final Action
May 19, 2026
Non-Final Rejection mailed — §103
Jul 15, 2026
Interview Requested
Jul 24, 2026
Examiner Interview Summary
Jul 24, 2026
Applicant Interview (Telephonic)
Aug 10, 2026
Response Filed
Oct 28, 2026
Final Rejection mailed — §103 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12785149
ELECTROLYTE FOR LITHIUM SECONDARY BATTERY, AND LITHIUM SECONDARY BATTERY COMPRISING SAME
4y 6m to grant Granted Nov 03, 2026
Patent 12785073
GELLING CATHODE AND GELLED ELECTROLYTE AND METHOD OF FORMING THE SAME
4y 3m to grant Granted Nov 03, 2026
Patent 12770969
END CAP ASSEMBLY, BATTERY CELL, BATTERY, AND ELECTRICAL DEVICE
3y 10m to grant Granted Oct 20, 2026
Patent 12725824
Unit Cell Preparation Apparatus and Method
3y 11m to grant Granted Sep 01, 2026
Patent 12725860
ELECTRICITY STORAGE DEVICE AND METHOD FOR PRODUCING ELECTRICITY STORAGE DEVICE
3y 6m to grant Granted Sep 01, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

7-8
Expected OA Rounds
73%
Grant Probability
99%
With Interview (+36.7%)
3y 6m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 41 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month