Prosecution Insights
Last updated: November 04, 2026
Application No. 17/666,985

CONVERTING VARIABLE RENEWABLE ENERGY TO CONSTANT FREQUENCY ELECTRICITY BY A VOLTAGE REGULATED SPEED CONVERTER, A VOLTAGE-CONTROLLED MOTOR GENERATOR SET OR A VOLTAGE CONVERTER

Non-Final OA §112
Filed
Feb 08, 2022
Priority
Jul 08, 2021 — provisional 63/219,579 +1 more
Examiner
DHAKAL, BICKEY
Art Unit
2896
Tech Center
2800 — Semiconductors & Electrical Systems
Assignee
Differential Dynamics Corporation
OA Round
3 (Non-Final)
84%
Grant Probability
Favorable
3-4
OA Rounds
0m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 84% — above average
84%
Career Allowance Rate
648 granted / 770 resolved
+16.2% vs TC avg
Strong +16% interview lift
Without
With
+16.4%
Interview Lift
resolved cases with interview
Typical timeline
2y 4m
Avg Prosecution
33 currently pending
Career history
812
Total Applications
across all art units

Statute-Specific Performance

§101
2.8%
-37.2% vs TC avg
§103
44.2%
+4.2% vs TC avg
§102
25.5%
-14.5% vs TC avg
§112
24.9%
-15.1% vs TC avg
Black line = Tech Center average estimate • Based on career data from 770 resolved cases

Office Action

§112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Applicant's submission filed on 08/10/2026 has been entered. Response to Arguments Applicant’s arguments, filed 08/10/2026, with respect to claim 1 have been fully considered and are not persuasive. The applicant has not addressed all the rejections under § 112 mentioned in the previous office action. Specification The specification is objected to as failing to provide proper antecedent basis for the claimed subject matter. See 37 CFR 1.75(d)(1) and MPEP § 608.01(o). Correction of the following is required: the phrase “three variable ring assembly” is not a part of the disclosure. The examiner is not sure if this is meant to be “three variable ring gear assembly” instead. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claim 1 is rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. The claim is indefinite for following reasons: Line 6, the phrase " minimum variable" is indefinite because neither the claim nor the specification defines a term "minimum". Lines 6-8, the phrase "for outputting a minimum.....to a voltage regulator" is indefinite because it's unclear if "a minimum variable electric power level' goes to both "an input motor" and "a voltage regulator". Line 9, the phrase "three variable ring" is confusing because it’s unclear if this refers to the same three variable ring gear mentioned in line 9. Line 10, the phrase "assembly regulated" is indefinite because it's unclear how assembly is regulated. It should be noted that usually signals are regulated not the physical device. Line 19, the phrase "a second three variable ring gear" has antecedent issues because there is no first three variable ring gear. Also, it’s unclear whether it’s a part of " a second series-connected three variable ring" disclosed in lines 8 and 9. Line 21, the phrase "an output electricity generator" has antecedent issues because "an output generator" has been disclosed in line 17. It's unclear if these are the same. Lines 21-23, the phrase "for outputting electric power at a constant output rotational speed component ranging from zero rotational speed to a constant input rotational speed component" is indefinite because the claim mentions "constant speed" and also mentions “ranging from zero ....input rotational speed". The examiner believes that the claim is trying to claim constant and range of speed at the same time. Lines 24-25, 30-31 and 35, the phrase “return to the voltage regulator” is indefinite because it’s unclear what is being returned. Line 26, the phrase "an input shaft" also has antecedent issues because “an input shaft” has been already disclosed in line 8. Line 28, it's unclear if the phrase "an output shaft gear" refer to the same "output shaft gear" disclosed in lines 20-21. Line 28, it's unclear if the phrase "an output shaft" refer to "a shaft of an output electricity generator " disclosed in lines 20-21. If these are the same then phrase "an output shaft" should be re-written as "the output shaft". Line 30, it's unclear how "a variable load" and "an output variable load" in line 24 are different. If these are the same, then correction should be done. Lines 34-35, the phrase “speed from zero….and return to the voltage regulator” is already part of lines 22-25. The phrase should be deleted to avoid confusion. The claim recited phrases “control unit for”, “power generating assembly for”, “harnessing module for”, “a voltage regulator for”, “a control motor for”, “a constant input rotational speed component for”, “output electricity generator for” in a purely results-oriented manner using “for”, failing to describe the specific means by which the structures interact. The claims fail to provide sufficient clarity about the components achieve the claimed result. Conclusion (The claim has been rejected under35 USC § 112 only; no prior art has been used for rejection) Any inquiry concerning this communication or earlier communications from the examiner should be directed to BICKEY DHAKAL whose telephone number is (571)272-3577. The examiner can normally be reached 8:30-4:30 PM. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Eduardo Colon-Santana can be reached at 571-272-2060. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /BICKEY DHAKAL/Primary Examiner, Art Unit 2837
Read full office action

Prosecution Timeline

Show 3 earlier events
Aug 06, 2024
Non-Final Rejection mailed — §112
Sep 13, 2024
Applicant Interview (Telephonic)
Sep 13, 2024
Examiner Interview Summary
Oct 17, 2024
Response Filed
Mar 20, 2025
Non-Final Rejection mailed — §112
Sep 24, 2025
Response after Non-Final Action
Aug 10, 2026
Response Filed
Oct 09, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12780601
ELEVATOR COMMUNICATION SYSTEM AND METHOD, STORAGE MEDIUM
4y 12m to grant Granted Nov 03, 2026
Patent 12785608
CONTROL DEVICE, MACHINE SYSTEM, AND DISPLAY DEVICE
2y 7m to grant Granted Nov 03, 2026
Patent 12767488
CONTROL UNIT
3y 7m to grant Granted Oct 20, 2026
Patent 12766205
ELEVATOR CAR AND UVC RADIATION DEVICE FOR AN ELEVATOR CAR
3y 5m to grant Granted Oct 20, 2026
Patent 12771267
MOTOR CONTROL CIRCUIT, MOTOR CONTROL INTEGRATED CIRCUIT, AND METHOD FOR CONTROLLABLY DRIVING MOTOR
2y 4m to grant Granted Oct 20, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

3-4
Expected OA Rounds
84%
Grant Probability
99%
With Interview (+16.4%)
2y 4m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 770 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month