Prosecution Insights
Last updated: November 04, 2026
Application No. 17/758,593

HOLLOW FIBER MEMBRANE SYSTEMS AND METHODS

Final Rejection §102§103§112
Filed
Jul 11, 2022
Priority
Jan 10, 2020 — provisional 62/959,477 +1 more
Examiner
MENON, KRISHNAN S
Art Unit
1777
Tech Center
1700 — Chemical & Materials Engineering
Assignee
Pentair Filtration Solutions LLC
OA Round
6 (Final)
60%
Grant Probability
Moderate
7-8
OA Rounds
0m
Est. Remaining
71%
With Interview

Examiner Intelligence

Grants 60% of resolved cases
60%
Career Allowance Rate
906 granted / 1517 resolved
-5.3% vs TC avg
Moderate +11% lift
Without
With
+11.4%
Interview Lift
resolved cases with interview
Typical timeline
3y 3m
Avg Prosecution
75 currently pending
Career history
1597
Total Applications
across all art units

Statute-Specific Performance

§101
2.0%
-38.0% vs TC avg
§103
40.4%
+0.4% vs TC avg
§102
24.0%
-16.0% vs TC avg
§112
24.0%
-16.0% vs TC avg
Black line = Tech Center average estimate • Based on career data from 1517 resolved cases

Office Action

§102 §103 §112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Election/Restrictions Claims 11-18 are withdrawn from further consideration pursuant to 37 CFR 1.142(b), as being drawn to a nonelected invention, there being no allowable generic or linking claim. Applicant timely traversed the restriction (election) requirement in the reply filed on 11/25/24. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. Claims 1-8, 10 and 19-22 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Claim 1 now recites: “wherein the chlorine-resistant coating allows selective passage of calcium and magnesium hardness ions from the retentate side to the permeate side to improve taste of the permeate.” This claim element is indefinite because it has no quantitative way of measuring the “selective passage” to differentiate with the prior arts. Further, “to improve taste of the permeate” is also a relative term, because there is no quantitative way to assess this limitation. Claim Rejections - 35 USC § 102/103 The following is a quotation of the appropriate paragraphs of 35 U.S.C. 102 that form the basis for the rejections under this section made in this Office action: A person shall be entitled to a patent unless – (a)(1) the claimed invention was patented, described in a printed publication, or in public use, on sale, or otherwise available to the public before the effective filing date of the claimed invention. The following is a quotation of 35 U.S.C. 103 which forms the basis for all obviousness rejections set forth in this Office action: A patent for a claimed invention may not be obtained, notwithstanding that the claimed invention is not identically disclosed as set forth in section 102, if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains. Patentability shall not be negated by the manner in which the invention was made. Claim(s) 1-8, 10 and 19-22 are is/are rejected under 35 U.S.C. 102(a1) as being anticipated by De Grooth (WO 2018/202317,) or alternately, under 35 USC 103 as unpatentable over De Grooth in view of Nutalapati et al (US 2018/0221822.) Claims 1-4, 21 and 22: De Grooth teaches an apparatus for filtering in fig. 3. The membrane is hollow fiber (page 10) with internal or external bilayer or multi-layer (layer by layer coating) coating of polyanion (Polystyrene sulfonate (PSS, Mw-200,000 ) and polycation (Poly( diallyldimethyl-ammonium chloride) (PDADMAC) (see page 10). The polyanions include sulfonic acids and carboxylic acids ionically coupled to the surface. Polyanion include quaternary ammonium – see figures 1 and 2. The base layer is the support layer as taught in [0013], [0016], [0025], and [0041]. De Grooth in the working example starts with a base hollow fiber membrane in [0041], on to which is coated alternating cationic/anionic layers using layer-by-layer deposition. This “membrane” is the base membrane as defined in the other cited paragraphs. If the starting membrane lacks a charge, the first coating would accomplish that. That is, the base membrane can be the hollow fiber membrane with a charged layer, on to which is coated more charged layers as in the claims. Newly added limitations: Chlorine-resistant coating: the coating in De Grooth is the same as applicant discloses, PDADMAC/PSS. See also [0018] for chlorine resistance. Selective calcium and magnesium passage: having high passage of calcium and magnesium ions are considered to impart poor taste, higher retention by the membrane is preferred. See fig. 6 of De Grooth for calcium and magnesium retention. Paragraphs [0055]-[0058] also teach that the permeability and salt retention have inverse relationship, which means that can be optimized. Regarding the retentate outlet having a valve, fig. 3 of De Grooth shows a valve in the return line, but it is unclear if this is the retentate line. However, the description of Fig. 3 at [0044] shows that it is a test set-up, which means both permeate and retentate are recycled, meaning, they can be returned together through the same conduit. Therefore the claims area anticipated. Notwithstanding, having a valve in the retentate line recycling retentate is not inventive, but routine in the art, as seen in Nutalapati – see fig. 1, which shows a controllable recirculation system for tangential (cross flow) membranes. MPEP 2143: Rationales from combining references: combining prior art elements according to known methods to yield predictable results; or use of known technique to improve similar devices (methods, or products) in the same way, are prima facie obvious. In this case providing a valve to control the retentate flow would have been obvious to one of ordinary skill in the art. Claims 5-8: while the reference does not explicitly teach the membrane pore size of 1-10 nm, it would have been inherent (see citation below.) Passage of calcium and magnesium ions can be tailored or optimized as needed as cited in rejection of claim 1, and therefore would have been obvious. Claim 10: multi-layers – see figs. 4 and 5. Claims 19: TDS content in permeate would be less than that of the feed, since the membrane rejects most of the TDS. Claim 20: inherent – same membrane. Claims 21 and 22: a detailed examination of De Grooth shows that the multi-layer growth was done by immersion coating, which means that the coating could be on both inside and outside surfaces. MPEP 2112: Inherency, inherent property: "[T]he discovery of a previously unappreciated property of a prior art composition, or of a scientific explanation for the prior art’s functioning, does not render the old composition patentably new to the discoverer." Atlas Powder Co. v. IRECO Inc., 190 F.3d 1342, 1347, 51 USPQ2d 1943, 1947 (Fed. Cir. 1999). Thus the claiming of a new use, new function or unknown property which is inherently present in the prior art does not necessarily make the claim patentable. In re Best, 562 F.2d 1252, 1254, 195 USPQ 430, 433 (CCPA 1977). In In re Crish, 393 F.3d 1253, 1258, 73 USPQ2d 1364, 1368 (Fed. Cir. 2004), the court held that the claimed promoter sequence obtained by sequencing a prior art plasmid that was not previously sequenced was anticipated by the prior art plasmid which necessarily possessed the same DNA sequence as the claimed oligonucleotides. The court stated that "just as the discovery of properties of a known material does not make it novel, the identification and characterization of a prior art material also does not make it novel." Id. See also MPEP § 2112.01 with regard to inherency and product-by-process claims In response to applicant’s arguments: arguments are addressed in the rejection. Contrary to arguments, applicant’s polymeric material disclosed in [0033] are porous ultrafiltration membranes, like that of De Grooth. Subsequent paragraphs add layer-by-layer deposition of charged polyelectrolytes. Therefore, the examiner sees no difference. Conclusion THIS ACTION IS MADE FINAL. Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action. Any inquiry concerning this communication or earlier communications from the examiner should be directed to KRISHNAN S MENON whose telephone number is (571)272-1143. The examiner can normally be reached Flexible, but generally Monday-Friday: 8:00AM-4:30PM. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Prem Singh can be reached on 5712720579. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /KRISHNAN S MENON/Primary Examiner, Art Unit 1777
Read full office action

Prosecution Timeline

Show 8 earlier events
Nov 21, 2025
Final Rejection mailed — §102, §103, §112
Feb 20, 2026
Request for Continued Examination
Feb 27, 2026
Response after Non-Final Action
May 12, 2026
Non-Final Rejection mailed — §102, §103, §112
Aug 03, 2026
Interview Requested
Aug 13, 2026
Examiner Interview Summary
Sep 14, 2026
Response Filed
Sep 24, 2026
Final Rejection mailed — §102, §103, §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12774574
CONTAINMENT BOOM, SYSTEM, AND METHOD FOR CONFINING AN OIL SPILL
4y 3m to grant Granted Oct 27, 2026
Patent 12766466
REVERSE OSMOSIS FILTRATION SYSTEM
3y 3m to grant Granted Oct 20, 2026
Patent 12766465
A filter-box and a retrievable subsea filter module with a filter-box
3y 0m to grant Granted Oct 20, 2026
Patent 12758897
AN AUTOMATED CENTRIFUGATION DEVICE AND METHODS TO CONTINUOUSLY SEPARATE COMPONENTS FROM DIFFERENT MIXTURES
3y 8m to grant Granted Oct 13, 2026
Patent 12752244
CROSS-LINKED MINERAL MEMBRANES
4y 0m to grant Granted Oct 06, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

7-8
Expected OA Rounds
60%
Grant Probability
71%
With Interview (+11.4%)
3y 3m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 1517 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month