Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Claims 1, 3, 5-16 and 18-20 are pending in the application. No newly added or canceled claims presented.
Drawings
The drawings are objected to under 37 CFR 1.83(a). The drawings must show every feature of the invention specified in the claims. Therefore, the three-sided pivot lever with a first corner pivotally connected to said at least one linear actuator, a second corner pivotally connected to said frame, and a third corner pivotally connected to said lift must be shown or the feature(s) canceled from the claim(s). No new matter should be entered.
Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Claim Rejections - 35 USC § 112
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 1, 3, 5-16 and 18-20 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the enablement requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to enable one skilled in the art to which it pertains, or with which it is most nearly connected, to make and/or use the invention. It is unclear what structure applicant is referring to as “a three-sided pivot lever”. It is also unclear how the lever is connected such that a first corner of said three- sided pivot lever is pivotally connected to said at least one linear actuator, a second corner of said three-sided pivot lever is pivotally connected to said frame, and a third corner of said three-sided pivot lever is pivotally connected to said lift member. Additionally it is unclear how the lever would function and connect to the claimed structures to provide a mechanical advantage. Applicant’s specification and drawings do not provide enough information regarding how this is accomplished. (Examiner notes it was initially assumed “a lever” referred to the brackets 15L & 15 R in figure 1. However it appear not to be the case.)
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1, 3, 5-16 and 18-20 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. It is unclear what structure applicant is referring to as “a three-sided pivot lever connected such that a first corner of said three- sided pivot lever is pivotally connected to said at least one linear actuator, a second corner of said three-sided pivot lever is pivotally connected to said frame, and a third corner of said three-sided pivot lever is pivotally connected to said lift member to provide mechanical advantage to a lifting force of said linear actuator”. It is additionally unclear how the lever would function and connect to the claimed structures to provide a mechanical advantage. (Examiner notes it was initially assumed “a lever” referred to the brackets 15L & 15 R in figure 1. However it appear not to be the case.)
Conclusion
The prior art made of record and not relied upon is considered pertinent to applicant's disclosure.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to IFEOLU A ADEBOYEJO whose telephone number is (571)270-3072. The examiner can normally be reached M-Th 10AM-5PM EST.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Matthew Troutman can be reached at (571) 270-3654. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/IFEOLU A ADEBOYEJO/Examiner, Art Unit 3679
/Matthew Troutman/Supervisory Patent Examiner, Art Unit 3679
