Prosecution Insights
Last updated: November 04, 2026
Application No. 17/952,226

DOPED SILICON ANODE FOR LITHIUM-ION BATTERIES

Final Rejection §112
Filed
Sep 24, 2022
Priority
Jun 27, 2022 — provisional 63/355,855
Examiner
SLIFKA, SARAH A
Art Unit
1759
Tech Center
1700 — Chemical & Materials Engineering
Assignee
Posi Energy- Silicon Power LLC
OA Round
2 (Final)
76%
Grant Probability
Favorable
3-4
OA Rounds
0m
Est. Remaining
87%
With Interview

Examiner Intelligence

Grants 76% — above average
76%
Career Allowance Rate
542 granted / 717 resolved
+10.6% vs TC avg
Moderate +11% lift
Without
With
+11.2%
Interview Lift
resolved cases with interview
Typical timeline
3y 0m
Avg Prosecution
24 currently pending
Career history
740
Total Applications
across all art units

Statute-Specific Performance

§101
1.1%
-38.9% vs TC avg
§103
55.5%
+15.5% vs TC avg
§102
17.4%
-22.6% vs TC avg
§112
22.7%
-17.3% vs TC avg
Black line = Tech Center average estimate • Based on career data from 717 resolved cases

Office Action

§112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Claim Rejections - 35 USC § 112 The following is a quotation of the first paragraph of 35 U.S.C. 112(a): (a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention. The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112: The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention. Claim 50 is rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention. There is no support presented in the instant specification wherein a coin cell or a pouch cell is fabricated, as claimed. The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 43-50 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Regarding claim 43, it is not clear which portion of the claim is intended to limit the structure. If the crystal Si anode is intended to be the structure, then an amendment saying wherein the structure includes a crystal Si anode would be recommended as it now reads as though the structure is the cathode layer, separator, and anode which would be improper insofar as the preamble is directed towards a structure adapted to form the anode so having the structure for forming an anode include all other components of the battery is indefinite. In line 6, it is recommended to remove the word jointly. Claim 44 recites the limitation "said Lithium containing layer" in 2. There is insufficient antecedent basis for this limitation in the claim. Claim 45 recites the limitation "said electrolytes" in 2. There is insufficient antecedent basis for this limitation in the claim. Additionally, the claim is indefinite since only one electrolyte was required in instant claims 43-44, so it is not clear if this is intended to limit that electrolyte or if multiple electrolytes are required. Also, the only mention of an electrolyte is in instant claim 43 which requires a “liquid electrolyte” in line 5 and as such, “said electrolytes” would only be proper in the form of “said liquid electrolyte.” Claim 46 recites the limitation "said electrolyte" in 2. There is insufficient antecedent basis for this limitation in the claim. Claim 47 recites the limitation "said Li metal containing cathode material" in 2. There is insufficient antecedent basis for this limitation in the claim. It is assumed that this limitation is in reference to the Li-containing cathode layer of instant claim 43. It is also not clear if the material is intended to require both a lithium salt and an NCA compound or if only one is required. Regarding claim 48, the instant claim requires electroplating a Cu layer in the electroplating step. It is not clear if this is the same Cu layer formed in the depositing a Cu layer step or if this is a different Cu layer. Regarding claim 49, the instant claim is indefinite insofar as the preamble is not in line with that of claim 48 from which it depends. Claim 48 requires a method of making a structure adapted to form a lithiated anode suitable for use in a Li-ion battery whereas instant claim 49 requires the method of making the structure to form a lithiated thinned single crystal Si anode suitable for use in a Li-ion battery which is not the same method of instant claim 48. Please amend the preamble to be in line with the parent claim. Regarding claim 50, the instant claim is indefinite insofar as the preamble is not in line with that of claim 48 from which it depends. Claim 48 requires a method of making a structure adapted to form a lithiated anode suitable for use in a Li-ion battery whereas instant claim 50 requires the method of making the structure to form a lithiated thinned single crystal Si anode suitable for use in a Li-ion battery which is not the same method of instant claim 48. Please amend the preamble to be in line with the parent claim. The following is a quotation of 35 U.S.C. 112(d): (d) REFERENCE IN DEPENDENT FORMS.—Subject to subsection (e), a claim in dependent form shall contain a reference to a claim previously set forth and then specify a further limitation of the subject matter claimed. A claim in dependent form shall be construed to incorporate by reference all the limitations of the claim to which it refers. The following is a quotation of pre-AIA 35 U.S.C. 112, fourth paragraph: Subject to the following paragraph [i.e., the fifth paragraph of pre-AIA 35 U.S.C. 112], a claim in dependent form shall contain a reference to a claim previously set forth and then specify a further limitation of the subject matter claimed. A claim in dependent form shall be construed to incorporate by reference all the limitations of the claim to which it refers. Claims 45, 46 49, and 50 are rejected under 35 U.S.C. 112(d) or pre-AIA 35 U.S.C. 112, 4th paragraph, as being of improper dependent form for failing to further limit the subject matter of the claim upon which it depends, or for failing to include all the limitations of the claim upon which it depends. Applicant may cancel the claim(s), amend the claim(s) to place the claim(s) in proper dependent form, rewrite the claim(s) in independent form, or present a sufficient showing that the dependent claim(s) complies with the statutory requirements. Regarding claim 45, the instant claim requires the electrolyte to be solid or liquid, however, claim 44 from which instant claim 45 depends, requires the electrolyte to be a liquid electrolyte. As the instant claim is already limited to a liquid electrolyte in the parent claim, instant claim 45 fails to further limit claim 44. Regarding claim 46, the instant claim requires the electrolyte to be a solid state, however, claim 44 from which instant claim 46 ultimately depends, requires the electrolyte to be a liquid electrolyte. As the instant claim is already limited to a liquid electrolyte in the parent claim, instant claim 46 fails to further limit claim 44. Regarding claim 49, the instant claim firstly fails to further limit the parent claim insofar as the preamble is seemingly to a different method. Secondly, it is not clear what instant claim 49 requires as the only additional step is an optional oxidation step. As the additional step is optional, the instant claim fails to further limit instant claim 48. Regarding claim 50, the instant claim fails to further limit the parent claim insofar as the instant claim is to a method for making a structure adapted to form an…anode suitable for use in a Li-ion battery, so the use of the structure in manufacturing a battery would not further limit the method of making the structure used as an anode. Allowable Subject Matter As allowable subject matter has been indicated, applicant's reply must either comply with all formal requirements or specifically traverse each requirement not complied with. See 37 CFR 1.111(b) and MPEP § 707.07(a). Response to Arguments Applicant’s arguments with respect to claim(s) 43-50 have been considered. While the subject matter of the claims has been deemed allowable, the rejections set forth above will need to be addressed prior to allowance. Conclusion Applicant's amendment necessitated the new ground(s) of rejection presented in this Office action. Accordingly, THIS ACTION IS MADE FINAL. See MPEP § 706.07(a). Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action. Any inquiry concerning this communication or earlier communications from the examiner should be directed to SARAH A SLIFKA whose telephone number is (571)270-5838. The examiner can normally be reached Monday-Friday 9am-5:30pm EST. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Curtis Mayes can be reached at 571-272-1234. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /SARAH A. SLIFKA/Primary Examiner, Art Unit 1759 September 23, 2026
Read full office action

Prosecution Timeline

Sep 24, 2022
Application Filed
Dec 03, 2025
Non-Final Rejection mailed — §112
Mar 02, 2026
Response Filed
Sep 24, 2026
Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12785161
SYSTEMS AND METHODS FOR GENERATING ROLL MAP AND MANUFACTURING BATTERY USING ROLL MAP
3y 2m to grant Granted Nov 03, 2026
Patent 12785084
POSITIVE ELECTRODE MATERIAL AND PREPARATION METHOD THEREFOR, POSITIVE ELECTRODE PLATE, AND BATTERY
3y 1m to grant Granted Nov 03, 2026
Patent 12785069
SECONDARY BATTERY AND METHOD FOR MANUFACTURING THE SAME
2y 9m to grant Granted Nov 03, 2026
Patent 12770957
BATTERY AND ELECTRIC APPARATUS
3y 4m to grant Granted Oct 20, 2026
Patent 12770916
ION CONDUCTIVE SOLID AND ALL-SOLID-STATE BATTERY
3y 1m to grant Granted Oct 20, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

3-4
Expected OA Rounds
76%
Grant Probability
87%
With Interview (+11.2%)
3y 0m (~0m remaining)
Median Time to Grant
Moderate
PTA Risk
Based on 717 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month