Prosecution Insights
Last updated: November 04, 2026
Application No. 17/980,247

CUTTER UNIT AND PRINTER

Non-Final OA §112
Filed
Nov 03, 2022
Priority
Nov 12, 2021 — JP 2021-185211
Examiner
RILEY, JONATHAN G
Art Unit
3724
Tech Center
3700 — Mechanical Engineering & Manufacturing
Assignee
Seiko Instruments Inc.
OA Round
5 (Non-Final)
52%
Grant Probability
Moderate
5-6
OA Rounds
0m
Est. Remaining
82%
With Interview

Examiner Intelligence

Grants 52% of resolved cases
52%
Career Allowance Rate
343 granted / 656 resolved
-17.7% vs TC avg
Strong +30% interview lift
Without
With
+30.0%
Interview Lift
resolved cases with interview
Typical timeline
3y 1m
Avg Prosecution
53 currently pending
Career history
716
Total Applications
across all art units

Statute-Specific Performance

§101
0.4%
-39.6% vs TC avg
§103
45.6%
+5.6% vs TC avg
§102
13.2%
-26.8% vs TC avg
§112
35.7%
-4.3% vs TC avg
Black line = Tech Center average estimate • Based on career data from 656 resolved cases

Office Action

§112
Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Continued Examination Under 37 CFR 1.114 A request for continued examination under 37 CFR 1.114, including the fee set forth in 37 CFR 1.17(e), was filed in this application after final rejection. Since this application is eligible for continued examination under 37 CFR 1.114, and the fee set forth in 37 CFR 1.17(e) has been timely paid, the finality of the previous Office action has been withdrawn pursuant to 37 CFR 1.114. Applicant's submission filed on 8-19-2026 has been entered. Claim 1 was amended. Claims 3-6 were cancelled. Claims 1-2 and 7 are pending and examined in this action. Claim Rejections - 35 USC § 112 The following is a quotation of the first paragraph of 35 U.S.C. 112(a): (a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention. The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112: The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention. Claims 1-2 and 7 rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention. In re Claim 1, “the movable blade holder further comprises a plurality of guide protruding portions integrally formed on the front end surface and extending toward the conveyance destination side, the plurality of guide protruding portions engaging the plurality of guide holes, and wherein the sliding surface of the sliding plate is configured to slide on the front end surface of the movable blade holder,” was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention. Specifically, the guide protruding portions #321p – see Applicant’s Fig. 5B - are not integrally formed with the front-end surface/sliding surface 314F – see Applicant’s Fig. 5A. These are different components and move relative to teach other. As such, they cannot be said to be integral. Dependent Claims 2 and 7 do not cure this rejection. It is to be noted that claims 1-2 and 7 have not been rejected over prior art. It may or may not be readable over the prior art but allowability cannot be determined at this time in view of the issues under 35 USC § 112(a). Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to JONATHAN RILEY whose telephone number is (571)270-7786. The examiner can normally be reached Monday - Friday, 8:30 AM - 5:00 PM. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Boyer Ashley can be reached at 571-272-4502. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /JONATHAN G RILEY/Primary Examiner, Art Unit 3724
Read full office action

Prosecution Timeline

Show 5 earlier events
Dec 17, 2025
Response after Non-Final Action
Jan 28, 2026
Non-Final Rejection mailed — §112
Apr 17, 2026
Response Filed
May 20, 2026
Final Rejection mailed — §112
Jul 10, 2026
Response after Non-Final Action
Aug 19, 2026
Request for Continued Examination
Aug 21, 2026
Response after Non-Final Action
Aug 27, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12779723
PLASTIC STRAND GRANULATOR HAVING AN ADJUSTING MECHANISM FOR ADJUSTING THE CUTTING GAP
4y 6m to grant Granted Nov 03, 2026
Patent 12779715
RAZOR CARTRIDGE
2y 5m to grant Granted Nov 03, 2026
Patent 12779563
DUST COLLECTION STRUCTURE OF BAND SAW MACHINE
2y 3m to grant Granted Nov 03, 2026
Patent 12773805
PANEL SAW ASSEMBLY
3y 0m to grant Granted Oct 27, 2026
Patent 12766617
SAW BLADE
4y 8m to grant Granted Oct 20, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

5-6
Expected OA Rounds
52%
Grant Probability
82%
With Interview (+30.0%)
3y 1m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 656 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month