DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status.
Claims 1-22 are pending.
Election/Restrictions
Applicant’s election of Group II, claims 11-18 and the following species in the reply filed on 01/02/24 is acknowledged. Because applicant did not distinctly and specifically point out the supposed errors in the restriction requirement, the election has been treated as an election without traverse (MPEP § 818.01(a)).
PNG
media_image1.png
120
113
media_image1.png
Greyscale
Claim(s) 1-10, 19-22 is/are withdrawn from further consideration pursuant to 37 CFR 1.142(b) as being drawn to a nonelected subject matter, there being no allowable generic or linking claim. Election was made without traverse in the reply filed on 01/02/24.
Claim Rejections - 35 USC § 112(a)/first paragraph
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claim(s) 11-18 is/are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for pre-AIA the inventor(s), at the time the application was filed, had possession of the claimed invention.
Claim 11 no longer recites that the two electrodes are connected through a through hole and instead more broadly recites that they are electrically connected. This broadens the claims scope beyond that of the original invention which is only ever described with the through hole limitation. Therefore this broadening amendment is new matter.
The rest of the rejected claims not specifically addressed above are rejected because they depend from one of the claims specifically addressed above and therefore include the same new matter issue(s) via their dependency.
Claim Rejections - 35 USC § 103
In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status.
If this application currently names joint inventors: in considering patentability of the claims the examiner presumes that the subject matter of the various claims was commonly owned as of the effective filing date of the claimed invention(s) absent any evidence to the contrary. Applicant is advised of the obligation under 37 CFR 1.56 to point out the inventor and effective filing dates of each claim that was not commonly owned as of the effective filing date of the later invention in order for the examiner to consider the applicability of 35 U.S.C. 102(b)(2)(C) for any potential 35 U.S.C. 102(a)(2) prior art against the later invention.
The following is a quotation of 35 U.S.C. 103 which forms the basis for all obviousness rejections set forth in this Office action:
A patent for a claimed invention may not be obtained, notwithstanding that the claimed invention is not identically disclosed as set forth in section 102, if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains. Patentability shall not be negated by the manner in which the invention was made.
The factual inquiries set forth in Graham v. John Deere Co., 383 U.S. 1, 148 USPQ 459 (1966), that are applied for establishing a background for determining obviousness under 35 U.S.C. 103 are summarized as follows:
1. Determining the scope and contents of the prior art.
2. Ascertaining the differences between the prior art and the claims at issue.
3. Resolving the level of ordinary skill in the pertinent art.
4. Considering objective evidence present in the application indicating obviousness or nonobviousness.
When something is indicated as being “obvious” this should be taken as shorthand for “prima facie obvious to one having ordinary skill in the art to which the claimed invention pertains before the effective filing date of the invention”.
When a range is indicated as overlapping a claimed range, unless otherwise noted, this should be taken as short hand to indicate that the claimed range is obvious in view of the overlapping range in the prior art as set forth in MPEP 2144.05, in the case where the claimed range “overlap or lie inside ranges disclosed by the prior art”, a prima facie case of obviousness exists, In re Wertheim, 541 F.2d 257, 191 USPQ 90 (CCPA 1976); In re Woodruff, 919 F.2d 1575, 16 USPQ2d 1934 (Fed. Cir. 1990).
Claim(s) 11-18 is/are rejected under 35 U.S.C. 103 as being unpatentable over Ikeno et al. (U.S. 2022/0025123).
Regarding claims 11-18, Ikeno teaches a resin composition having an organosilicon compound overlapping the elected species and claims 13-15 at an amount overlapping claim 16 with a catalyst and crosslinking agent as in claim 17-18, with the elastic modulus property of claim 12 being inherent because Ikeno teaches an overlapping amount of the same ingredients compared to the compositions of the present application that achieve such a property ([0033]-[0085]). The intended use of claim 11 related to layers in the stack is not given patentable weight because it is merely an intended use of the claimed resin composition and the composition of Ikeno is inherently capable of such a use.
Conclusion
References cited in any corresponding foreign applications have been considered but would be cumulative to the above. Any inquiry concerning this communication or earlier communications from the examiner should be directed to MICHAEL B NELSON whose direct telephone number is (571)272-9886 and whose direct fax number is (571)273-9886 and whose email address is Michael.Nelson@USPTO.GOV. The examiner can normally be reached on Mon-Sat, 7am - 7pm.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Callie Shosho can be reached on 571-272-1123. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300 (faxes sent to this number will take longer to reach the examiner than faxes sent to the direct fax number above).
Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/MICHAEL B NELSON/
Primary Examiner, Art Unit 1787