Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Election/Restrictions
Applicant’s election without traverse of Group I, claims 1-6 and of the species, antibody, quantitating and competition assay in the reply filed on 9/28/2025 is acknowledged.
Claims 7-20 are withdrawn from further consideration pursuant to 37 CFR 1.142(b) as being drawn to a nonelected invention and species, there being no allowable generic or linking claim. Election was made without traverse in the reply filed on 9/28/2025.
.
Claims 1-6 are under consideration.
Information Disclosure Statement
The listing of references in the specification is not a proper information disclosure statement. 37 CFR 1.98(b) requires a list of all patents, publications, or other information submitted for consideration by the Office, and MPEP § 609.04(a) states, "the list may not be incorporated into the specification but must be submitted in a separate paper." Therefore, unless the references have been cited by the examiner on form PTO-892, they have not been considered.
Claim Objections
Claim 1 is objected to because of the following informalities: in the first line of claim 1, “collagen typ XVIII” has a typo and should read “collagen type XVIII”. Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 3-4 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
Claims 3 and 4 have ellipsis (…) in the claims after an amino acid sequence and followed by a SEQ ID NO:. It is unclear what is the meaning of the ellipsis (…) in the claim. Does it mean there are more amino acids than what is listed in the sequence? Was this a typo? This symbol is confusing and unclear why it is present in the claims and does help clarify what the meets and bounds are of the claim. Removing the ellipsis (…) from the claims would overcome this rejection.
Claim Rejections - 35 USC § 112
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 1-6 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention.
Claim 1 is directed to any antibody that is specifically reactive with short isoform collagen type XVIII, wherein said antibody does not react with intermediate isoform collagen type XVIII or with long isoform collagen type XVIII. Dependent claims further describe antibodies that are specifically reactive with an N-terminal epitope of short isoform collagen type XVIII; is a monoclonal antibody with an epitope of SEQ ID NOs: 1-2 and does not bind SEQ ID NOs: 3-4 . As such, the claims are directed to an antibody defined entirely by function (binding). See MPEP §2163(I)(A) which states:
"The claimed invention as a whole may not be adequately described where an invention is described solely in terms of a method of its making coupled with its function and there is no described or art recognized correlation or relationship between the structure of the invention and its function. A biomolecule sequence described only by a functional characteristic, without any known or disclosed correlation between that function and the structure of the sequence, normally is not a sufficient identifying characteristic for written description purposes, even when accompanied by a method of obtaining the claimed sequence.”
In this case, antibodies generally share certain characteristics such as Fc regions or hinge regions. However, these structures are not correlated with the binding function of the antibody. The hyper variable regions (HVRs), i.e., complementarity determining regions (CDRs) of an antibody, are well established in the art as the portion of the binding region which imparts the specificity of an antibody. However, there is no way to a priori look at an antigen sequence (short isoform collagen type XVIII or SEQ ID NOs: 1-2) and envisage the combination of six CDRs that will bind that antigen. First, even highly related CDRs may not bind the same target. See for example Kussie et al., 1995 (instant PTO-892) who demonstrates that a single amino acid change in the heavy chain of an antibody which binds p-axophenylarsonate (Ars) completely abrogates the ability of the antibody to bind Ars but adds the functionality of binding the structurally related p-azophenylsulfonate (e.g., abstract). Second, even when provided with several related antibodies that bind the desired target, this does not represent the astronomical and potentially unknowable breadth of all possible amino acid sequences which will result in the desired binding properties. This is exemplified by the Court decision in Abbvie (Abbvie v Janssen 759 F.3d 1285 (Fed. Cir. 2014)), where Abbvie developed over 200 antibodies that shared 99.5% identity in the variable regions (p.7) and which bound the target, but in no way allowed one to envisage the unique structure of Centocor’s antibodies which bound the same target but shared only 50% sequence similarity (see table on page 11).
Thus, the art recognizes that the CDRs define the binding properties of an antibody and that even single amino acid changes to this region can completely abrogate the binding specificity of an antibody. As a further example, see Chen et al., 1995 (instant PTO-892) which demonstrates single amino acid changes in the VH CDR2 sequence can increase binding, decrease binding, destroy binding, or have no effect on binding when compared to the wild-type antibody.
See also Koenig 2017 (instant PTO-892), which provides a large mutation analysis study where every amino acid in both variable regions are substituted with every other amino acid. Looking at figure 1 of Koenig, the bottom half of each section (labeled VEGF) relates to the ability of the mutant to bind the original target, with blue meaning a reduced affinity and black meaning a complete loss of binding ability. In VH-CDR2, for example, mutating any given residue to cysteine, which is encompassed by the instant claims, resulted in reduced binding at 12 residues and a complete loss of binding at 5 residues. That is, at 100% of the positions, mutation to cysteine reduced or ablated the antibody’s ability to bind the target. Looking at a specific position, in 100% of the mutations of residue 55, binding was reduced (15/19) or eliminated (4/19). While residues 56-65 appear more tolerant of change, residues 50-55 are generally intolerant of change.
It is appreciated that Koenig is studying one specific antibody and there is no evidence that the instant antibodies would react in the same way. However, this is part of the problem. It is entirely unclear from the specification which residues of Applicant’s CDRs are tolerant or intolerant to change, and whether those tolerant positions are only tolerant to conservative mutations. The fact that some residues might tolerate mutation does not convey to the skilled artisan that Applicant knew which of the claimed residues were tolerant of such, i.e., does not convey that Applicant was in possession of those sequences which are mutated yet preserve the claimed function. In other words, the specification fails to convey possession of an invention commensurate in scope with what is now claimed and therefore fails to meet the written description requirement. Looking at Koenig figure 2A, ~200 mutations in the CDR region of the VH chain completely abrogates any binding. While 2B appears to indicate that the CDRs of VL are more tolerant of change than the heavy chain CDRs, still over half of the mutations reduce binding compared to the parent.
Thus, making changes to the CDR sequence of an antibody is a highly unpredictable process and the skilled artisan could not a priori make any predictions regarding such mutations with any reasonable expectation of success nor envisage the breadth of structurally unrelated CDR combinations that would still possess the required functions.
The specification discloses only one antibody which comprises NB632-13H11/G5 which binds the short form of type XVIII collagen but fails to provide any specific identifying structures like CDRS beyond the antibody being a monoclonal antibody (see pages 11 and 15 of the instant specification). The specification also indicates that the prior art does not make up for this deficiency in the instant specification since it states that there are no known biomarkers of antibodies specific to the short isotype of type XVIII collagen (see paragraph spanning pages 2-3 of instant specification). However, as discussed above, without any way to determine how broad the genus of such antibodies are, there is no way to determine if this antibody represent the full breadth of what is claimed. The disclosure of these specific antibodies would not convey to the artisan that Applicant was in possession of the full genus of all antibodies which possess the required functions nor does it allow the skilled artisan to envisage the specific structure of such antibodies.
Further note the decision in Amgen v. Sanofi 2017, where the Court supported previous decisions (Centocor 2011; Abbvie 2014) that defining an antibody solely by what it binds does not satisfy the written description requirement, stating that this would allow patentees to “claim antibodies by describing something that is not the invention, i.e., the antigen”. This decision has precipitated guidance to the Office instructing that the portion of MPEP 2163 regarding the “newly characterized antigen test” (indicating a well-characterized antigen is sufficient to satisfy written description for antibodies which bind that antigen) should no longer be used and that contrary materials should not be relied upon as reflecting the current state of the law.
To satisfy the written description requirement, a patent specification must describe the claimed invention in sufficient detail that one skilled in the art can reasonably conclude that the inventor had possession of the claimed invention. See, e.g., Vas-Cath, Inc., v. Mahurkar, 935 F.2d at 1563, 19 U.S.P.Q.2d at 1116. The claimed invention as a whole may not be adequately described where an invention is described solely in terms of a method of its making coupled with its function and there is no described or art-recognized correlation or relationship between the structure of the invention and its function. An antibody described only by functional characteristic, such as antibody that binds the short form of type XVIII collagen or one of the claimed epitopes, without any known or disclosed correlation between that function and the structure of the sequence, is not a sufficient identifying characteristic for written description purposes, even when accompanied by a method of obtaining the biomolecule of interest. In re Bell, 991 F.2d 781, 26 U.S.P.Q.2d 1529 (Fed. Cir. 1993). In re Deuel, 51 F.3d 1552, 34 U.S.P.Q.2d 1210 (Fed. Cir. 1995). In the instant case, the specification provides insufficient direction or guidance concerning the relationship between the structure of the possible antibody to demonstrate possession of the breadth of the genus of short form of type XVIII collagen antibodies encompassed by the instant claims, especially in view of the unpredictability of such an endeavor. The prior art as evidenced by Edwards et al., 2003 (instant PTO-892) teaches there is a substantially huge antibody diversity produced to one single antigen target. Edwards provides evidence that over 1000 antibodies, all different amino acid sequences, were generated towards one single protein antigen target (see abstract). Without a correlation between structure and function, the claims do little more than define the claimed invention by function. That is not sufficient to satisfy the written description requirement. See Eli Lilly, 119 F.3d at 1568, 43 USPQ2d at 1406 (“definition by function … does not suffice to define the genus because it is only an indication of what the gene does, rather than what it is”).
Without this guidance or direction the skilled artisan would not consider applicant to be in possession of the claimed genus of antibodies because the skilled artisan recognizes that even seemingly minor changes made without guidance or direction as to the relationship between the particular amino acid sequence of the instantly claimed antibody and its ability to bind antigen, can dramatically affect antigen-antibody binding.
Applicant has not described the claimed invention sufficiently to show they had possession of the claimed genus of an antibody that binds short form of type XVIII collagen. Possession may not be shown by merely describing how to obtain possession of members of the claimed genus or how to identify their common structural features. See University of Rochester v. G.D. Searle & Co., 358 F.3d 916, 69 USPQ2d 1886 (Fed. Cir. 2004).
The written description requirement for a claimed genus may be satisfied through sufficient description of a representative number of species by actual reduction to practice, reduction to drawings, or by disclosure of relevant, identifying characteristics, i.e., structure or other physical and/or chemical properties, by functional characteristics coupled with a known or disclosed correlation between function and structure, or by a combination of such identifying characteristics, sufficient to show the applicant was in possession of the claimed genus. A “representative number of species” means that the species which are adequately described are representative of the entire genus. Thus, when there is substantial variation within the genus, one must describe a sufficient variety of species to reflect the variation within the genus.
What constitutes a "representative number" is an inverse function of the skill and knowledge in the art. Satisfactory disclosure of a "representative number" depends on whether one of skill in the art would recognize that the applicant was in possession of the necessary common attributes or features of the elements possessed by the members of the genus in view of the species disclosed. For inventions in an unpredictable art, adequate written description of a genus which embraces widely variant species cannot be achieved by disclosing only one species within the genus.
To provide adequate written description and evidence of possession of the claimed genus, the specification must provide sufficient distinguishing identifying characteristics of the genus. The factors to be considered include disclosure of complete or partial structure, physical and/or chemical properties, functional characteristics, structure/function correlation, methods of making the claimed product, or any combination thereof. In the instant case, the only factors present in the claims are a recitation of one generic, broad genus that encompassed a diverse and huge number of possible antibodies that bind the disclosed epitope. The specification does not provide a consistent structure for all of the possible antibodies and fails to provide a representative number of species for the claimed genus. Accordingly, in the absence of sufficient recitation of distinguishing identifying characteristics, the specification does not provide adequate written description of the claimed genus.
Vas-Cath Inc. v. Mahurkar, 19USPQ2d 1111, clearly states that “applicant must convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention. The invention is, for purposes of the 'written description' inquiry, whatever is now claimed.” (See page 1117.) The specification does not “clearly allow persons of ordinary skill in the art to recognize that they invented what is claimed.” (See Vas-Cath at page 1116).
With the exception of specifically disclosed antibodies with specific CDRs, the skilled artisan cannot envision the detailed chemical structure of all of the encompassed antibodies, and therefore conception is not achieved until reduction to practice has occurred, regardless of the complexity or simplicity of the method of isolation. Adequate written description requires more than a mere statement that it is part of the invention and reference to a potential method of isolating it. The product itself is required. See Fiers v. Revel, 25 USPQ2d 1601 at 1606 (CAFC 1993) and Amgen Inc. v. Chugai Pharmaceutical Co. Ltd., 18 USPQ2d 1016.
One cannot describe what one has not conceived. See Fiddes v. Baird, 30 USPQ2d 1481 at 1483. In Fiddes, claims directed to mammalian FGF's were found to be unpatentable due to lack of written description for that broad class. Applicant is reminded that Vas-Cath makes clear that the written description provision of 35 U.S.C. §112 is severable from its enablement provision (see page 1115).
Therefore, claims 1-6 do not meet the written description requirement.
Conclusion
No claims are allowed.
Advisory Information
Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to AURORA M. FONTAINHAS whose telephone number is 571-272-2952. The examiner can normally be reached on Monday - Friday (8AM - 4PM).
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Jeffrey Stucker can be reached on (571)272-0911. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
/AURORA M FONTAINHAS/Primary Examiner, Art Unit 1675