Prosecution Insights
Last updated: November 04, 2026
Application No. 18/198,547

AIRFLOW MANAGEMENT SYSTEMS AND METHODS FOR FILTERED AIR SYSTEMS

Non-Final OA §112
Filed
May 17, 2023
Priority
Aug 09, 2022 — provisional 63/396,325
Examiner
TIGHE, DANA K
Art Unit
3762
Tech Center
3700 — Mechanical Engineering & Manufacturing
Assignee
Precision Air Products Co.
OA Round
3 (Non-Final)
76%
Grant Probability
Favorable
3-4
OA Rounds
0m
Est. Remaining
93%
With Interview

Examiner Intelligence

Grants 76% — above average
76%
Career Allowance Rate
509 granted / 672 resolved
+5.7% vs TC avg
Strong +17% interview lift
Without
With
+16.9%
Interview Lift
resolved cases with interview
Typical timeline
3y 3m
Avg Prosecution
23 currently pending
Career history
705
Total Applications
across all art units

Statute-Specific Performance

§101
0.5%
-39.5% vs TC avg
§103
51.5%
+11.5% vs TC avg
§102
17.5%
-22.5% vs TC avg
§112
28.1%
-11.9% vs TC avg
Black line = Tech Center average estimate • Based on career data from 672 resolved cases

Office Action

§112
DETAILED ACTION The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status. Continued Examination Under 37 CFR 1.114 A request for continued examination under 37 CFR 1.114, including the fee set forth in 37 CFR 1.17(e), was filed in this application after final rejection. Since this application is eligible for continued examination under 37 CFR 1.114, and the fee set forth in 37 CFR 1.17(e) has been timely paid, the finality of the previous Office action has been withdrawn pursuant to 37 CFR 1.114. Applicant's submission filed on 05/19/2026 has been entered. Response to Amendment The Amendment filed 05/19/2026 has been entered. 1 – 7 and 9 – 15 are currently pending in the application. Response to Arguments Applicant’s arguments with respect to the claims have been considered. The previous prior art rejections of the claims have been withdrawn. However, new grounds of rejection are made below based on new matter. Claim Rejections - 35 USC § 112 The following is a quotation of the first paragraph of 35 U.S.C. 112(a): (a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention. The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112: The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention. Claims 1 – 7 and 9 – 15 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention. Regarding Claim 1, the claim was amended to recite “where the step of obtaining is performed without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan” in lines 6-7. There is lack of written description for this limitation in the disclosure as filed. Any negative or exclusionary provision (“without”) must have basis in the original disclosure. The specification lacks reciting “where the step of obtaining is performed without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan”. The specification even lacks reciting “lookup mapping” or “pre-established airflow-versus-pressure characteristic curve”. The Applicant recites “Claim 1 has been amended to clarify that the step of obtaining the current air volume is performed without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan. Support for this language is found, for example, at Paragraphs 12 and 24. Paragraph 24 confirms that control is achieved independent of an actual system curve. Paragraph 12 reflects a measurement-based, in situ determination of airflow rather than reliance on pre-characterized fan relationships via active pressure techniques” on Page 5. The Examiner respectfully disagrees that Paragraph 12 or 24 provides written description for the claimed exclusionary subject matter. Paragraph 12 merely recites various techniques for measuring air volume. Paragraph 24 merely recites “fan control is provided independent of an actual system curve”. This is not the same as reciting “where the step of obtaining is performed without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan” in the claims. Accordingly, there is lack of written description for the limitation, making it new matter. Claims 2 – 7 and 9 – 11 are rejected for their dependency on Claim 1. Regarding Claim 12, the claim was amended to recite “during normal operation of the air handling system” in line 3 and “wherein the current air volume at each of the plurality of fans is obtained without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan” in lines 6-8. There is lack of written description for these limitations in the disclosure as filed. The specification lacks reciting “obtaining, during normal operation of the air handling system, a current air volume”. The specification lacks reciting “normal operation of the air handling system” at all. Further, any negative or exclusionary provision (“without”) must have basis in the original disclosure. The specification lacks reciting “the current air volume at each of the plurality of fans is obtained without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan”. The specification even lacks reciting “lookup mapping” or “pre-established airflow-versus-pressure characteristic curve”. The Applicant recites “Claim 12 has been amended to clarify that the current air volume at each fan is obtained during normal operation of the air handling system and without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan. Support for this language is found, for example, at Paragraphs 12 and 24. Paragraph 24 confirms that control is achieved independent of an actual system curve. Paragraph 12 reflects a measurement-based, in situ determination of airflow rather than reliance on pre-characterized fan relationships via active pressure techniques” on Page 8. The Examiner respectfully disagrees that Paragraph 12 or 24 provides written description for the claimed exclusionary subject matter. Paragraph 12 merely recites various techniques for measuring air volume. Paragraph 24 merely recites “fan control is provided independent of an actual system curve”. This is not the same as reciting “the current air volume at each of the plurality of fans is obtained without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan” in the claims. Further, there is no support in Paragraphs 12 or 24 that “the current air volume at each fan is obtained during normal operation of the air handling system. Accordingly, there is lack of written description for the limitation, making it new matter. Claims 13 – 14 are rejected for their dependency on Claim 12. Regarding Claim 15, the claim was amended to recite “wherein the current air volume is obtained without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan” in lines 6-8. There is lack of written description for this limitation in the disclosure as filed. Any negative or exclusionary provision (“without”) must have basis in the original disclosure. The specification lacks reciting “the current air volume is obtained without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan”. The specification even lacks reciting “lookup mapping” or “pre-established airflow-versus-pressure characteristic curve”. The Applicant recites “Claim 15 has been amended to clarify that the current air volume is obtained without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan. Support for this language is found, for example, at Paragraphs 12 and 24. Paragraph 24 confirms that control is achieved independent of an actual system curve. Paragraph 12 reflects a measurement-based, in situ determination of airflow rather than reliance on pre-characterized fan relationships via active pressure techniques” on Page 5. The Examiner respectfully disagrees that Paragraph 12 or 24 provides written description for the claimed exclusionary subject matter. Paragraph 12 merely recites various techniques for measuring air volume. Paragraph 24 merely recites “fan control is provided independent of an actual system curve”. This is not the same as reciting “the current air volume is obtained without applying a pre-established airflow-versus-pressure characteristic curve or lookup mapping for the fan” in the claims. Accordingly, there is lack of written description for the limitation, making it new matter. Allowable Subject Matter Claims 1 – 7 and 9 – 15 would be allowable if rewritten to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action and to include all of the limitations of the base claim and any intervening claims. Regarding Claim 1, the prior art, either alone or in combination, does not teach each and every limitation recited. Claims 2 – 7 and 9 – 11 depend from Claim 1. Regarding Claim 12, the prior art, either alone or in combination, does not teach each and every limitation recited. Claims 13 – 14 depend from Claim 12. Regarding Claim 15, the prior art, either alone or in combination, does not teach each and every limitation recited. Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to DANA K TIGHE whose telephone number is (571)272-9476. The examiner can normally be reached on Monday - Friday 8:00 - 4:00. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Steve McAllister can be reached on (571)272-6785. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /D. T./ Examiner, Art Unit 3762 /AVINASH A SAVANI/Primary Examiner, Art Unit 3762
Read full office action

Prosecution Timeline

May 17, 2023
Application Filed
Sep 23, 2025
Non-Final Rejection mailed — §112
Dec 23, 2025
Response Filed
Mar 17, 2026
Final Rejection mailed — §112
May 19, 2026
Response after Non-Final Action
Jun 17, 2026
Request for Continued Examination
Jun 25, 2026
Response after Non-Final Action
Oct 27, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12787184
HOUSING HAVING VENTILATION MEMBER ARRANGED THEREIN, AND ELECTRONIC DEVICE COMPRISING SAME
3y 1m to grant Granted Nov 03, 2026
Patent 12779937
AIR CONDITIONER FOR VEHICLE
2y 11m to grant Granted Nov 03, 2026
Patent 12779931
VEHICLE AIR CONDITIONING SYSTEM
2y 5m to grant Granted Nov 03, 2026
Patent 12774824
DUCT TYPE AIR CONDITIONING VENTILATION SYSTEM
2y 10m to grant Granted Oct 27, 2026
Patent 12766913
DUCT APPARATUS FOR A MOBILITY VEHICLE
2y 11m to grant Granted Oct 20, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

3-4
Expected OA Rounds
76%
Grant Probability
93%
With Interview (+16.9%)
3y 3m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 672 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month