Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
This office action is in response to the claims filed 7/7/23 and the response to restriction filed 2/3/26. Claims 1-27 are pending with claims 1-13 and 26-27 examined on their merits below and claims 14-25 withdrawn from consideration as being directed towards non-elected subject matter.
Election/Restrictions
Claims 14-25 are withdrawn from further consideration pursuant to 37 CFR 1.142(b) as being drawn to a nonelected invention group, there being no allowable generic or linking claim. Election was made without traverse in the reply filed on 2/3/26.
Drawings
The drawings are objected to as failing to comply with 37 CFR 1.84(p)(5) because they do not include the following reference sign(s) mentioned in the description: 30. Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Claim Objections
Claims 1, 8, 10, 26, and 27 are objected to because of the following informalities:
Regarding claim 1, the language “a cam follower that coupled to” (line 6) is objected to for a grammatical/typographical error; Examiner suggests amending to read –a cam follow that is coupled to--.
Regarding claim 1, the language “a outer frame” (line 8) is objected to for a grammatical/typographical error; Examiner suggests amending to read –an outer frame--.
Regarding claim 8, the language “a user” (line 2) is objected to as the user has already been set forth in claim 1 line 1; Examiner suggests amending to read –the user--.
Regarding claim 10, the language “a base” (line 2) is objected to as the base has already been set forth in claim 1 line 7.
Regarding claim 26, the language “the hip, …” (line 2) is objected to as the ‘hip …’ lacks antecedent basis in the claim; however, this does not rise to the level of indefiniteness as it is known that ‘a user’ (claim 1 line 1) would have such joints. Examiner suggests amending to read –a hip, …--.
Regarding claim 27, the language “interface couple to a” is objected to for a grammatical/typographical error; Examiner suggests amending to read –interface coupled to a--.
Regarding claim 27, the language “a spring couple to the spring body” (line 12) is objected to for a grammatical/typographical error; Examiner suggests amending to read –a spring coupled to the spring body--.
Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 2, 5, 8-10, 12, and 27 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
Regarding claim 2, the language “other such elastic behaving element” (line 2) is broad to the point of indefiniteness as it is not understand, in light of the disclosure, what ‘such elements’ are being referred to with this language and thus the metes and bounds of the claim cannot be ascertained.
Claim 5 recites the limitation "the first bearing guide" in line 3. There is insufficient antecedent basis for this limitation in the claim.
Claim 8 recites the limitation "the vertical placement height" in line 2-3. There is insufficient antecedent basis for this limitation in the claim.
Claim 9 recites the limitation "the … fourth bearing" in line 2-3. There is insufficient antecedent basis for this limitation in the claim.
Claim 10 recites the limitation "the fifth bearing" in line 3. There is insufficient antecedent basis for this limitation in the claim.
Claim 12 recites the limitation "the motor" in line 1. There is insufficient antecedent basis for this limitation in the claim.
Claim 27 recites the limitation "the base" in line 14. There is insufficient antecedent basis for this limitation in the claim.
Claim Rejections - 35 USC § 101
35 U.S.C. 101 reads as follows:
Whoever invents or discovers any new and useful process, machine, manufacture, or composition of matter, or any new and useful improvement thereof, may obtain a patent therefor, subject to the conditions and requirements of this title.
Claims 1-13, 26, and 27 are rejected under 35 U.S.C. 101 because Section 33(a) of the America Invents Act reads as follows:
Notwithstanding any other provision of law, no patent may issue on a claim directed to or encompassing a human organism.
Claims 1-13, 26, and 27 are rejected under 35 U.S.C. 101 and section 33(a) of the America Invents Act as being directed to or encompassing a human organism. See also Animals - Patentability, 1077 Off. Gaz. Pat. Office 24 (April 21, 1987) (indicating that human organisms are excluded from the scope of patentable subject matter under 35 U.S.C. 101).
Regarding claim 1, the language “robotic device providing assistance torque to a user” (line 1) appears to claim the user, a human organism which is non-statutory subject matter, as part of the claimed invention. In order for the robotic device to be providing assistance torque to the user, the user must be part of the claimed invention. Examiner suggests amending to read –robotic device configured to provide assistance torque to a user--.
Regarding claim 8, the language “a thigh interface located on a user” (line 2) appears to claim the user, a human organism which is non-statutory subject matter, as part of the claimed invention. In order for the thigh interface to be located on a user, the user must be present in the claimed invention. Examiner suggests amending to read –a thigh interface configured to be located on the user--.
Regarding claim 27, the language “robotic device providing assistance torque to a user” (line 1) appears to claim the user, a human organism which is non-statutory subject matter, as part of the claimed invention. In order for the robotic device to be providing assistance torque to the user, the user must be part of the claimed invention. Examiner suggests amending to read –robotic device configured to provide assistance torque to a user--.
Claims 2-7, 9-13, and 26 are rejected based on dependency on a rejected claim.
Allowable Subject Matter
Claims 1-13, 26, and 27 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, 35 U.S.C. 101, and the claim objections set forth in this Office action.
Reasons for Allowance
The following is an examiner’s statement of reasons for allowance: when read in light of the limitations of the claimed wearable mechanical robotic device for providing assistance torque to a user about a joint, the prior art does not disclose, either alone or suggest in combination, a robotic device including a housing accommodating an actuator coupled to a pin lock that allows a cam to rotate when in an unlocked position and prevents the cam from rotating in a locked position; a cam follower coupled to a plunger that is engaged by the cam and which compresses a spring against a base; and an outer frame having at least one guide for the pin lock as set forth in independent claim 1. The prior art is also silent as to a robotic device including a first body interface coupled to a cam body which has a first axis on a first side of the joint, a second body interface coupled to a spring body which has a base end, a cam interface end, and a second axis on a second side of the joint, the second axis orthogonal or at an oblique angle to the first axis, the second body interface having a base end and a plunger end; a cam having an axis of rotation coupled to the first body interface such that when the first axis is rotated by movement of the user about the joint, the cam is rotated about the axis of rotation; a spring coupled to the spring body and sharing the second axis; a plunger coupled to the spring at the cam interface end such that rotation of the cam engages the plunger to compress against the base; a motor coupled to the base or the cam to selectively actuate the base or the cam to compress the spring or to disengage the spring from the cam as set forth in independent claim 27.
The closest prior art references of record are: Li et al. (CN 215920446), Hepburn (4,508,111), Hepburn (4,397,308), Hepburn (4,485,808), Vedeloff et al. (2015/0031507), Julin (2020/0011406), and Asbeck et al. (2021/0298985).
While the above mentioned prior art references of record relate to the claimed invention, such as disclosing housing with a cam, cam follower, and spring which is compressed against a base to the provide a return/assistance torque to a user about a joint, they do not disclose, either alone or suggest in combination, the limitations discussed above and set forth in independent claims 1 and 27, in particular the actuator and pin lock and their functionality within the claimed robotic device of claim 1 and the motor with its functionality within the claimed robotic device of claim 27.
Any comments considered necessary by applicant must be submitted no later than the payment of the issue fee and, to avoid processing delays, should preferably accompany the issue fee. Such submissions should be clearly labeled “Comments on Statement of Reasons for Allowance.”
Conclusion
Any inquiry concerning this communication or earlier communications from the examiner should be directed to COLIN W STUART whose telephone number is (571)270-7490. The examiner can normally be reached M-F: 9-5.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Timothy Stanis can be reached at 571-272-5139. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/COLIN W STUART/ Primary Examiner, Art Unit 3785