Prosecution Insights
Last updated: November 20, 2026
Application No. 18/234,692

SAMPLE ANALYSIS APPARATUS AND SAMPLE ANALYSIS METHOD USING THE SAME

Final Rejection §112
Filed
Aug 16, 2023
Priority
Sep 06, 2022 — RE 10-2022-0113051 +1 more
Examiner
SODERQUIST, ARLEN
Art Unit
1797
Tech Center
1700 — Chemical & Materials Engineering
Assignee
Samsung Electronics Co., Ltd.
OA Round
2 (Final)
60%
Grant Probability
Moderate
3-4
OA Rounds
0m
Est. Remaining
86%
With Interview

Examiner Intelligence

Grants 60% of resolved cases
60%
Career Allowance Rate
561 granted / 936 resolved
-5.1% vs TC avg
Strong +26% interview lift
Without
With
+26.1%
Interview Lift
resolved cases with interview
Typical timeline
3y 3m
Avg Prosecution
23 currently pending
Career history
962
Total Applications
across all art units

Statute-Specific Performance

§101
1.8%
-38.2% vs TC avg
§103
43.0%
+3.0% vs TC avg
§102
15.0%
-25.0% vs TC avg
§112
32.0%
-8.0% vs TC avg
Black line = Tech Center average estimate • Based on career data from 936 resolved cases

Office Action

§112
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . The following is a quotation of 35 U.S.C. 112(f): (f) Element in Claim for a Combination. – An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. The claims in this application are given their broadest reasonable interpretation using the plain meaning of the claim language in light of the specification as it would be understood by one of ordinary skill in the art. The broadest reasonable interpretation of a claim element (also commonly referred to as a claim limitation) is limited by the description in the specification when 35 U.S.C. 112(f) is invoked. As explained in MPEP § 2181, subsection I, claim limitations that meet the following three-prong test will be interpreted under 35 U.S.C. 112(f): (A) the claim limitation uses the term “means” or “step” or a term used as a substitute for “means” that is a generic placeholder (also called a nonce term or a non-structural term having no specific structural meaning) for performing the claimed function; (B) the term “means” or “step” or the generic placeholder is modified by functional language, typically, but not always linked by the transition word “for” (e.g., “means for”) or another linking word or phrase, such as “configured to” or “so that”; and (C) the term “means” or “step” or the generic placeholder is not modified by sufficient structure, material, or acts for performing the claimed function. Use of the word “means” (or “step”) in a claim with functional language creates a rebuttable presumption that the claim limitation is to be treated in accordance with 35 U.S.C. 112(f). The presumption that the claim limitation is interpreted under 35 U.S.C. 112(f) is rebutted when the claim limitation recites sufficient structure, material, or acts to entirely perform the recited function. Absence of the word “means” (or “step”) in a claim creates a rebuttable presumption that the claim limitation is not to be treated in accordance with 35 U.S.C. 112(f). The presumption that the claim limitation is not interpreted under 35 U.S.C. 112(f) is rebutted when the claim limitation recites function without reciting sufficient structure, material or acts to entirely perform the recited function. Claim limitations in this application that use the word “means” (or “step”) are being interpreted under 35 U.S.C. 112(f), except as otherwise indicated in an Office action. Conversely, claim limitations in this application that do not use the word “means” (or “step”) are not being interpreted under 35 U.S.C. 112(f), except as otherwise indicated in an Office action. This application includes one or more claim limitations that do not use the word “means,” but are nonetheless being interpreted under 35 U.S.C. 112(f) because the claim limitation(s) uses a generic placeholder that is coupled with functional language without reciting sufficient structure to perform the recited function and the generic placeholder is not preceded by a structural modifier. Such claim limitation(s) is/are: a transfer module configured to transfer a sample container of the at least one sample container that stores the small sample from the accommodation space to the first processing space in claims 1 and 9. Because this claim limitation is being interpreted under 35 U.S.C. 112(f), it is being interpreted to cover the corresponding structure described in the specification as performing the claimed function, and equivalents thereof. If applicant does not intend to have this/these limitation(s) interpreted under 35 U.S.C. 112(f), applicant may: (1) amend the claim limitation(s) to avoid it/them being interpreted under 35 U.S.C. 112(f) (e.g., by reciting sufficient structure to perform the claimed function); or (2) present a sufficient showing that the claim limitation(s) recite(s) sufficient structure to perform the claimed function so as to avoid it/them being interpreted under 35 U.S.C. 112(f). Claims 1-20 are rejected under 35 U.S.C. 112(b), as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, regards as the invention. Claims 1 and 9 were amended to include the language of “a small sample that has a smaller size than a size of a wafer sample” as part of the language associated with the first chamber. Examiner notes that the small sample is not an element of the sample analysis apparatus so that it is not clear what aspect/component of the first chamber is configured based on the size of the sample or its comparative size with respect to the wafer sample. Is the volume of the first chamber the element that allows the first chamber to be configured for the small sample? Alternatively, is it the at least one container, the first support, the first heating device, a combination of one or more of these elements (i.e., the first chamber volume and the at least one container) or something else that is configured for the small sample? Examiner notes that instant paragraph [0037] teaches the wafer sample may have a diameter of about 100 mm to about 300 mm, and the small sample may have a diameter of about 10 mm to about 20 mm. Since there are a range of diameters for the wafer sample, is the language limiting the small sample to a size smaller than the largest diameter of the wafer sample, the smallest diameter of the wafer sample, the diameter range of the small sample in the above paragraph or some other diameter/dimension? The placement of this language in claim 19 extends these questions to claim 19 as well. All other claims are dependent from claims 1, 9 or 19 and fail to correct the issues of those claims. Claims 1, 9 and 19 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) set forth in this Office action. The following is a statement of reasons for the indication of allowable subject matter: the art of record fails to teach or fairly suggest the combined structure of the apparatus claims and the combined process steps of the methods being claimed. In particular the art of record fails to teach the combination of elements required by claim 1. Applicant's arguments filed August 28, 2026 have been fully considered but they are not persuasive. First examiner notes that applicant’s representative has requested that examiner accept the drawings. In response to this request, examiner notes that the drawings have not been objected to by examiner or other office personnel. The fact that the application has been published means that the office accepted them as being adequate to use for that purpose (see MPEP § 507). MPEP § 608.02(x) states that, “Drawing corrections or changes will be entered at the time they are presented, unless applicant is notified to the contrary by the examiner in the action following the amended drawing submission.” To the best of examiner’s understanding, box/section 11 on form PTOL-326 is for when examiner either objects to the content of the drawings and/or is communicating to applicant regarding whether new or replacement drawings are acceptable or unacceptable. At this point, nothing in the drawings has come to examiner’s attention that would change that determination by the office or point to other problems with the drawings related to their content or lack thereof. Thus, the lack of a notification that there are problems with the drawings is sufficient by itself to confirm that the drawings have been accepted. With respect to applicant’s claim for priority, examiner notes that the appropriate section of form PTOL-326 has been updated to show the receipt of the priority documents. With respect to the rejection under 35 U.S.C. 112(b), it has been updated to explain the issues with the amended language. Additionally, the portion directed toward the need for a door or other mechanism to block gases/vapors from the first chamber from reaching the accommodation space has been withdrawn. With respect to a sample being small, that is usually in comparison to something that is larger. However, in the instant case there are different problems. First, neither the small sample nor the wafer sample are positively recited as an element of the sample analysis apparatus. While silicon wafers having defined diameters are known and/or might be considered as standard sizes, the fact that there are several different diameters that could be considered as a standard size raises a question regarding which diameter is intended. As noted above, instant paragraph [0037] teaches diameters ranging from 100 mm to 300 mm. The fact that there is a range of diameters given for the wafer sample minimally raises the question of which diameter of a wafer sample is the one being referred to by the claims. Within the wafer sample diameter range, a diameter of 100 mm is certainly smaller than 300 mm and a wafer with a diameter of 100 mm could be considered a small sample compared to a wafer having the 300 mm diameter. Examiner notes that instant paragraph [0037] teaches diameters of about 10 mm to about 20 mm for the small sample. While that is certainly smaller than the diameter range given for the wafer samples, the question is whether the claim is intended to cover anything smaller than the 100 mm diameter or something having a diameter in the range given for the small sample in instant paragraph [0037]. Thus, even though applicant has provided a comparison for the small sample, there are still questions that arise based on the comparison and the argument of applicant are not persuasive. While use of the “small sample” language might be important to applicant, the ultimate question is what distinguishes the first chamber from the second chamber so that the first chamber is configured to perform a first heating process for heating a small sample from the second chamber and its respective heating process for heating a wafer sample? Is the difference in the size/volume of the processing space in the two chambers or can the chambers have the same processing space size/volume? Is the difference in the support or heating device of the chambers or can they be the same for both chambers? Is the difference in the accommodation space, the sample tray, the sample container or the transfer module or do both chambers include those elements even though they are not claimed with respect to the second chamber? In this respect examiner notes that the newly cited Xu patent publication (US 2011/0265951) teaches twin chambers performing the same processing steps that have independent processing volumes and a plurality of shared resources including an accommodation space (a vacuum substrate transfer chamber 136). While the “small sample” language might be important to applicant, there are certainly other clear and definite ways to claim/preserve the concept that resulted in the instant invention. For example, a sample container configured to store a sample having a diameter of about 10 mm to about 20 mm would provide a clear, definite structural limitation related to what applicant has taught as the size of a small sample without using a relative term or an unclear relative comparison. Applicant's amendment necessitated the new ground(s) of rejection presented in this Office action. Accordingly, THIS ACTION IS MADE FINAL. See MPEP § 706.07(a). Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action. The prior art made of record and not relied upon is considered pertinent to applicant's disclosure. The cited art is related to apparatus and methods in which reactive gases are used to perform different processing steps of wafers such as reactive etching and/or chemical vapor deposition. Any inquiry concerning this communication or earlier communications from the examiner should be directed to Arlen Soderquist whose telephone number is (571)272-1265. The examiner can normally be reached 1st week Monday-Thursday, 2nd week Monday-Friday. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Lyle Alexander can be reached at (571)272-1254. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /ARLEN SODERQUIST/Primary Examiner, Art Unit 1797
Read full office action

Prosecution Timeline

Aug 16, 2023
Application Filed
May 28, 2026
Non-Final Rejection mailed — §112
Jun 25, 2026
Interview Requested
Jul 01, 2026
Applicant Interview (Telephonic)
Jul 01, 2026
Examiner Interview Summary
Aug 28, 2026
Response Filed
Nov 04, 2026
Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12800507
BIOLOGICAL SAMPLE ANALYSIS DEVICE AND BIOLOGICAL SAMPLE ANALYSIS METHOD
4y 12m to grant Granted Nov 17, 2026
Patent 12800529
LIGAND-TARGET INTERACTION ANALYSIS BY PHOTOCHEMICALLY INDUCED DYNAMIC NUCLEAR POLARIZATION (PHOTO-CIDNP) ENHANCED NMR SPECTROSCOPY
2y 9m to grant Granted Nov 17, 2026
Patent 12791395
DESCENDING AND ASCENDING TEMPERATURE INDICATORS UTILIZING DEEP EUTECTICS
4y 6m to grant Granted Nov 10, 2026
Patent 12791451
AUTOMATED WORKSTATION, AND PROCESS, FOR HANDLING HISTOLOGICAL SAMPLES IN THE EMBEDDING STEP
2y 11m to grant Granted Nov 10, 2026
Patent 12782301
METHODS AND COMPOSITIONS FOR LOW SALINITY ENHANCED OIL RECOVERY
3y 5m to grant Granted Nov 03, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

3-4
Expected OA Rounds
60%
Grant Probability
86%
With Interview (+26.1%)
3y 3m (~0m remaining)
Median Time to Grant
Moderate
PTA Risk
Based on 936 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month