Prosecution Insights
Last updated: November 04, 2026
Application No. 18/288,346

SINK ACCESSORY RAILING SYSTEM

Non-Final OA §112
Filed
Oct 25, 2023
Priority
Jul 13, 2021 — nonprovisional of PCTUS2021041409
Examiner
DEERY, ERIN LEAH
Art Unit
3754
Tech Center
3700 — Mechanical Engineering & Manufacturing
Assignee
Mila International Inc.
OA Round
3 (Non-Final)
58%
Grant Probability
Moderate
3-4
OA Rounds
0m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 58% of resolved cases
58%
Career Allowance Rate
469 granted / 802 resolved
-11.5% vs TC avg
Strong +49% interview lift
Without
With
+48.7%
Interview Lift
resolved cases with interview
Typical timeline
2y 6m
Avg Prosecution
31 currently pending
Career history
835
Total Applications
across all art units

Statute-Specific Performance

§101
0.6%
-39.4% vs TC avg
§103
44.9%
+4.9% vs TC avg
§102
12.4%
-27.6% vs TC avg
§112
37.2%
-2.8% vs TC avg
Black line = Tech Center average estimate • Based on career data from 802 resolved cases

Office Action

§112
DETAILED ACTION Continued Examination Under 37 CFR 1.114 A request for continued examination under 37 CFR 1.114, including the fee set forth in 37 CFR 1.17(e), was filed in this application after final rejection. Since this application is eligible for continued examination under 37 CFR 1.114, and the fee set forth in 37 CFR 1.17(e) has been timely paid, the finality of the previous Office action has been withdrawn pursuant to 37 CFR 1.114. Applicant's submission filed on 8/10/26 has been entered. The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . The text of those sections of Title 35, U.S. Code not included in this action can be found in a prior Office action. Claim Objections Claim 7 is objected to because of the following informalities: applicant is advised to delete “the first elongated rail, the second elongated rail,” in lines 1 and 2 since parent claim already sets forth that those elongated rails are triangular. Appropriate correction is required. Claim Rejections - 35 USC § 112 The following is a quotation of the first paragraph of 35 U.S.C. 112(a): (a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention. The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112: The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention. Claims 1 - 3, 6, 7, and 9 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention. Claim 1 recites that a top surface is oriented at “approximately 45 degrees” relative to the horizontal. “Approximately” does not find support in the originally filed disclosure. Applicant has not pointed out where the new (or amended) claim is supported, nor does there appear to be a written description of the claim limitation in the application as filed. See MPEP 2163(II)(A). The remaining claims are indefinite insofar as they depend from rejected based claims. The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 1 - 3, 6, 7, and 9 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Regarding claim 1: In line 18, applicant recites “a triangular cross-sectional shape” of the first and second elongated rail. Applicant previously recites, in line 10, that the rails are “triangular in cross section.” Accordingly, it is unclear how applicant is attempting to further define the shape of the rail, or if the newly claimed cross-sectional shape is somehow in addition to the previously recited one. In line 18, applicant recites “a top surface”; in line 19 applicant recites “a closed back surface.” However, in lines 11, 13, and 14, applicant various recites first, second, and third surfaces and their relative inclinations and sizes. It is not clear if “a top surface” and “a closed back surface” is meant to reference any of the first through third surfaces as set forth previously. If not, it is unclear how something can have a triangular cross section and have 5 different surfaces. It is assumed, based on the disclosure, that the top surface refers to the second surface and that the back surface refers to the first surface. In line 20, “a length” is a double inclusion of the length which is set forth in lines 12 - 13. In lines 20 - 21, it is unclear if “a first end to a second end thereof” refers to the sidewall or to the length of the rail. The remaining claims are indefinite insofar as they depend from a rejected base claim. Allowable Subject Matter Applicant’s remarks have been considered and the rejection of record reconsidered. Accordingly: Claims 10 - 15 are allowed. Claims 1 - 3, 6, 7, and 9 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action. The following claim drafted by the examiner and considered to distinguish patentably over the art of record in this application, is presented to applicant for consideration: Claim 1 (currently amended) A sink assembly, comprising: a sink basin including a bottom surface having a drain and four side walls extending upward from the bottom surface, wherein a first sidewall of the four side walls is provided with a first series of spaced apart apertures and a second sidewall of the four side walls opposite to the first sidewall includes a second series of spaced apart apertures; and a first elongated rail attached to the first sidewall by a series of connections through the first series of spaced apart apertures; and a second elongated rail attached to the second sidewall by a series of connections through the second series of spaced apart apertures, wherein the first elongated rail and the second elongated rail are triangular in cross section and the first elongated rail and the second elongated rail each include a first closed back surface disposed continuously against respective first and second sidewalls along an entire length of the first and second elongated rails, a second top surface facing upward away from the bottom surface of the sink basin and a third lower surface facing downward toward the bottom surface, the second surface being at an acute angle relative to the first surface, the first surface having a first width that is greater than a second width of the second surface and a third width of the third surface, such that the second surface is oriented at and the [[a]] length of the first and second rails extending substantially an entire length of the respective sidewall wherein the sliding engagement having reduced friction Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to ERIN L DEERY whose telephone number is (571)270-1928. The examiner can normally be reached on Mon - Thur, 7:30am - 4:30pm; Fri 8:00am-12:00pm. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice and to authorize internet communications. Copies of the patent documents cited in this action may be retrieved using https://patents.google.com/ or https://worldwide.espacenet.com/ . Applicant may access the MPEP at the following web address: https://www.uspto.gov/web/offices/pac/mpep/index.html . Applicant is advised that the Pro Se Assistance Program can provide information and assistance with respect to your patent application and other matters. Information about the program may be found at the following web address: https://www.uspto.gov/patents/basics/using-legal-services/pro-se-assistance-program If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, David Angwin can be reached on (571) 270-3735. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /ERIN DEERY/Primary Examiner, Art Unit 3754
Read full office action

Prosecution Timeline

Show 3 earlier events
Sep 24, 2025
Final Rejection mailed — §112
Dec 17, 2025
Applicant Interview (Telephonic)
Dec 17, 2025
Examiner Interview Summary
Mar 13, 2026
Request for Continued Examination
Apr 24, 2026
Response after Non-Final Action
Jul 29, 2026
Response Filed
Aug 10, 2026
Response Filed
Oct 20, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12781486
Hand Washing Station
2y 6m to grant Granted Nov 03, 2026
Patent 12765728
TOILET SEAT DEVICE AND CLOSET BOWL DEVICE
2y 7m to grant Granted Oct 20, 2026
Patent 12760542
REINFORCED POOL STRUCTURE
3y 0m to grant Granted Oct 13, 2026
Patent 12760502
FAUCET
2y 10m to grant Granted Oct 13, 2026
Patent 12760507
FLUID COUPLER
2y 7m to grant Granted Oct 13, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

3-4
Expected OA Rounds
58%
Grant Probability
99%
With Interview (+48.7%)
2y 6m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 802 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month