DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Election/Restriction
During a telephone conversation with Colin Dean on March 5, 2026 a provisional election was made without traverse to prosecute the invention of claims 1, 8, 9, 11-14, 18, and 19.
However, claims 1, 8, 9, 11-14, 18, and 19 are directed to an allowable product. Pursuant to the procedures set forth in MPEP § 821.04(b), claims 2-7, 10, 15-17, and 20, directed to the process of using an allowable product, previously withdrawn from consideration as a result of a restriction requirement, are hereby rejoined and fully examined for patentability under 37 CFR 1.104.
Because all claims previously withdrawn from consideration under 37 CFR 1.142 have been rejoined, the restriction requirement as set forth by the phone conversation on March 5, 2026 is hereby withdrawn. In view of the withdrawal of the restriction requirement as to the rejoined inventions, applicant(s) are advised that if any claim presented in a divisional application is anticipated by, or includes all the limitations of, a claim that is allowable in the present application, such claim may be subject to provisional statutory and/or nonstatutory double patenting rejections over the claims of the instant application. Once the restriction requirement is withdrawn, the provisions of 35 U.S.C. 121 are no longer applicable. See In re Ziegler, 443 F.2d 1211, 1215, 170 USPQ 129, 131-32 (CCPA 1971). See also MPEP § 804.01.
Information Disclosure Statement
The listing of references in the specification is not a proper information disclosure statement. 37 CFR 1.98(b) requires a list of all patents, publications, or other information submitted for consideration by the Office, and MPEP § 609.04(a) states, "the list may not be incorporated into the specification but must be submitted in a separate paper." Therefore, unless the references have been cited by the examiner on form PTO-892, they have not been considered.
Drawings
The drawings are objected to because figure 10 depicts multiple views in orientations which do not match the orientation of the view number or the "Yeast cells during cell division" label. See 37 CFR 1.84(h) and (p). Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Specification
Applicant is reminded of the proper content of an abstract of the disclosure.
A patent abstract is a concise statement of the technical disclosure of the patent and should include that which is new in the art to which the invention pertains. The abstract should not refer to purported merits or speculative applications of the invention and should not compare the invention with the prior art.
If the patent is of a basic nature, the entire technical disclosure may be new in the art, and the abstract should be directed to the entire disclosure. If the patent is in the nature of an improvement in an old apparatus, process, product, or composition, the abstract should include the technical disclosure of the improvement. The abstract should also mention by way of example any preferred modifications or alternatives.
Where applicable, the abstract should include the following: (1) if a machine or apparatus, its organization and operation; (2) if an article, its method of making; (3) if a chemical compound, its identity and use; (4) if a mixture, its ingredients; (5) if a process, the steps.
Extensive mechanical and design details of an apparatus should not be included in the abstract. The abstract should be in narrative form and generally limited to a single paragraph within the range of 50 to 150 words in length.
See MPEP § 608.01(b) for guidelines for the preparation of patent abstracts.
Claim Objections
Claims 8, 9, 11-14, 18, and 19 are objected to because of the following informalities: These claims are directed to the method of the claim on which they depend, when the parent claim is a system, not a method. Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1-20 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
Claim 1 recites the limitations of a carbon cloth on line 3, and an anode comprising a carbon cloth on line 6. It is unclear in view of the specification if the carbon cloth of line 3 is the same carbon cloth of the anode of claim 1, line 6. For the purpose of examination on the merits, claim 1 will be interpreted as having a single instance of carbon cloth, as disclosed on line 6. Claims 2-20 are rejected because they inherit all limitations of claim 1 on which they depend.
Claim 9 recites the limitation "polymeric membrane" in line 1. There is insufficient antecedent basis for this limitation in the claim. For the purpose of examination on the merits, claim 9 will be interpreted as referring to the ion-conductive membrane of the separator (Claim 1, line 5).
Claim 9 additionally contains the trademark/trade name NAFION. Where a trademark or trade name is used in a claim as a limitation to identify or describe a particular material or product, the claim does not comply with the requirements of 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph. See Ex parte Simpson, 218 USPQ 1020 (Bd. App. 1982). The claim scope is uncertain since the trademark or trade name cannot be used properly to identify any particular material or product. A trademark or trade name is used to identify a source of goods, and not the goods themselves. Thus, a trademark or trade name does not identify or describe the goods associated with the trademark or trade name. In the present case, the trademark/trade name is used to identify/describe the composition of the polymeric membrane (interpreted as the ion-conductive membrane of claim 1, line 5) and, accordingly, the identification/description is indefinite. For the purpose of examination on the merits, NAFION as it is used in claim 9 will be interpreted as sulfonated tetrafluoroethylene polymer.
Allowable Subject Matter
Claim 1 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action.
Claims 2-20 would be allowable if rewritten to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action and to include all of the limitations of the base claim and any intervening claims.
The following is an examiner’s statement of reasons for allowance: Cell encapsulations are disclosed in the art, particularly ones that impart magnetic properties to bacteria (Konnova et al., "Nanoshell Assembly for Magnet-Responsive Oil-Degrading Bacteria," 2016), and encapsulations formed by electrospinning or electrospraying. However, it is not obvious to one skilled in the art at the time of the invention's effective filing date to utilize an electrochemical cell to encapsulate probiotic cells with metal by the system and method disclosed.
Any comments considered necessary by applicant must be submitted no later than the payment of the issue fee and, to avoid processing delays, should preferably accompany the issue fee. Such submissions should be clearly labeled “Comments on Statement of Reasons for Allowance.”
Conclusion
Any inquiry concerning this communication or earlier communications from the examiner should be directed to Colton B. Forry whose telephone number is (571)272-8873. The examiner can normally be reached Monday through Friday, 7:30 AM-5:00 PM Eastern Time.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Michael Barr can be reached at 571-272-1414. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/CBF/
Examiner, Art Unit 1711
/MICHAEL E BARR/Supervisory Patent Examiner, Art Unit 1711