Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Terminal Disclaimer
The application number presented for “In re Application of” should be replaced with the inventor(s). This application was filed on or after September 16, 2012. The party identified in the terminal disclaimer is not the applicant of record. A request to change the applicant under 37 CFR 1.46(c) must be filed and must include an application data sheet specifying the applicant in the applicant information section and comply with 37 CFR 3.71 and 3.73. To be reconsidered, the terminal disclaimer must be filed with the request under 37 CFR 1.46(c).
A request under 37 CFR 1.46(c) is (1) a request, signed by a § 1.33(b) party, (2) a corrected application data sheet (37 CFR 1.76(c)) that identifies the “new” applicant in the applicant information (and is underlined since it is new), and (3) a § 3.73(c) statement showing chain of title to the new applicant. Along with the § 1.46(c) request should be a power of attorney who signs the terminal disclaimer and another copy of terminal disclaimer, unless a terminal disclaimer signed by the applicant is filed. The applicant on the terminal disclaimer must be cited exactly as it is cited on the application data sheet and/or the filing receipt and also in its entirety. For applications filed on or after September 16, 2012, 37 CFR 1.321 specifies that the applicant can disclaim, and the terminal disclaimer must specify the extent of the applicant’s ownership. Please correct and resubmit the terminal disclaimer. No new fee is required.
Specification
The Amendments to the Specification of June 2, 2026, do not comply with 37 CFR 1.121(b)(1) in that the specific changes have not been indicated with underlining or strikethrough as appropriate. Said Amendments have nevertheless been entered.
Claim Objections
Claim 55 is objected to because on the last line, “about of below about” lacks proper grammatical syntax. Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
Claims 47-50 and 52-55 are rejected under 35 U.S.C. 112(a) as failing to comply with the written description requirement. The claims contain subject matter which is not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, at the time the application was filed, had possession of the claimed invention. In claim 47, line 12, “a range from about 195 °F to about 230 °F” is not supported in the original disclosure of parent application 16/897,425, nor is there any indication that all of the materials listed in claim 49 innately possess formable values within this temperature range. Regarding claim 52, the “range from about 205 °F to about 220 °F” is likewise unsupported in said original disclosure. Regarding claim 55 at line 12, “about 200 °F” is presented as a lower limit of a fairly broad range (paragraph 00116 of the parent specification), and “225 °F” is also described as a lower limit (paragraph 0042; original claims 8 and 40), so one of ordinary skill in the art would not have inferred the claimed range with 225 °F as an upper limit, particularly in the absence of any supposed criticality for such a confined range, and an allegedly patentable portion may not be “carved out” from a more broadly disclosed range (MPEP § 2163.05 III).
Applicant has not pointed out the support in the original disclosure for each of the newly presented limitations to the claims (MPEP §§ 714.02 and 2163.06), and because of the procedure for interpreting such claims as set forth in MPEP § 2163.06, prior art may be applicable to any subsequently amended claims.
Double Patenting
The nonstatutory double patenting rejection is based on a judicially created doctrine grounded in public policy (a policy reflected in the statute) so as to prevent the unjustified or improper timewise extension of the “right to exclude” granted by a patent and to prevent possible harassment by multiple assignees. A nonstatutory double patenting rejection is appropriate where the conflicting claims are not identical, but at least one examined application claim is not patentably distinct from the reference claim(s) because the examined application claim is either anticipated by, or would have been obvious over, the reference claim(s). See, e.g., In re Berg, 140 F.3d 1428, 46 USPQ2d 1226 (Fed. Cir. 1998); In re Goodman, 11 F.3d 1046, 29 USPQ2d 2010 (Fed. Cir. 1993); In re Longi, 759 F.2d 887, 225 USPQ 645 (Fed. Cir. 1985); In re Van Ornum, 686 F.2d 937, 214 USPQ 761 (CCPA 1982); In re Vogel, 422 F.2d 438, 164 USPQ 619 (CCPA 1970); In re Thorington, 418 F.2d 528, 163 USPQ 644 (CCPA 1969).
A timely filed terminal disclaimer in compliance with 37 CFR 1.321(c) or 1.321(d) may be used to overcome an actual or provisional rejection based on nonstatutory double patenting provided the reference application or patent either is shown to be commonly owned with the examined application, or claims an invention made as a result of activities undertaken within the scope of a joint research agreement. See MPEP § 717.02 for applications subject to examination under the first inventor to file provisions of the AIA as explained in MPEP § 2159. See MPEP § 2146 et seq. for applications not subject to examination under the first inventor to file provisions of the AIA . A terminal disclaimer must be signed in compliance with 37 CFR 1.321(b).
The filing of a terminal disclaimer by itself is not a complete reply to a nonstatutory double patenting (NSDP) rejection. A complete reply requires that the terminal disclaimer be accompanied by a reply requesting reconsideration of the prior Office action. Even where the NSDP rejection is provisional the reply must be complete. See MPEP § 804, subsection I.B.1. For a reply to a non-final Office action, see 37 CFR 1.111(a). For a reply to final Office action, see 37 CFR 1.113(c). A request for reconsideration while not provided for in 37 CFR 1.113(c) may be filed after final for consideration. See MPEP §§ 706.07(e) and 714.13.
The USPTO Internet website contains terminal disclaimer forms which may be used. Please visit www.uspto.gov/patent/patents-forms. The actual filing date of the application in which the form is filed determines what form (e.g., PTO/SB/25, PTO/SB/26, PTO/AIA /25, or PTO/AIA /26) should be used. A web-based eTerminal Disclaimer may be filled out completely online using web-screens. An eTerminal Disclaimer that meets all requirements is auto-processed and approved immediately upon submission. For more information about eTerminal Disclaimers, refer to www.uspto.gov/patents/apply/applying-online/eterminal-disclaimer.
Claims 47-50 and 53-55 are rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1, 3-8, 12, and 17 of U.S. Patent No. 11,890,209 B2. Although the claims at issue are not identical, they are not patentably distinct from each other because all of the instant limitations are clearly set forth in said patent claims.
Response to Arguments
Applicant references In re Wertheim, 191 USPQ 90, 96 (CCPA 1976) and asserts that “when a specification discloses a range, subranges within that disclosed range are inherently supported” (Applicant’s reply of June 2, 2026: page 8, lines 5-7; page 9, lines 14-15). However, support for the claimed range of “between 35% and 60%” not only relies upon the disclosed broader range of “25% to 60%” (which establishes an upper limit of 60%) but also on the specific examples of “36%” and “50%”, which would have suggested to the ordinary practitioner alternative lower and upper limits and apparently also an adjacent lower limit of “35%” when read in light of the original disclosure overall. Applicant offers neither a specific example of In re Wertheim nor any line of reasoning in Applicant’s own original disclosure as to how one of ordinary skill in the art, at the effective filing date of the instant invention, would have inferred the range limits now being claimed and objected to above. It is the Applicant’s burden to precisely define the scope of the claimed invention, and not the examiner’s (In re Morris, 127 F.3d 1048, 1056, 44 USPQ2d 1023, 1029 (Fed. Cir. 1997)), and the burden may be shifted to Applicant to show support for the claims (Hyatt v. Dudas, 89 USPQ2d 1465 and 83 USPQ2d 1373; MPEP §§ 714.02 and 2163.06).
Conclusion
THIS ACTION IS MADE FINAL. Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to David H. Willse, whose telephone number is 571-272-4762. The examiner can normally be reached on Monday through Thursday. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor Melanie Tyson can be reached at telephone number 571-272-9062. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://portal.uspto.gov/external/portal. Should you have questions about access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, Applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
/DAVID H WILLSE/ Primary Examiner, Art Unit 3774