DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Claim Objections
Claims 14 and 17-28 are objected to because of the following informalities:
Claim 14 lines 14-15, the recitation “a braking request” should be changed to “the braking request”;
Claim 17 line 2, the recitation “a braking action” should be changed to “the braking action”;
Claim 17 lines 3-4, the recitation “a regenerative braking torque” should be changed to “the regenerative braking torque”;
Claim 18 line 3, the recitation “a braking action” should be changed to “the braking action”;
Claim 18 line 4, the recitation “a hydraulic braking action” should be changed to “the hydraulic braking action”;
Claim 19 lines 5, the recitation “a regenerative braking torque” should be changed to “the regenerative braking torque”;
Claim 20 line 4, the recitation “a braking request” should be changed to “the braking request”;
Claim 21 lines 3, 8 and 13, the recitation “a braking action” should be changed to “the braking action”;
Claim 22 line 2, the recitation “a regenerative braking torque” should be changed to “the regenerative braking torque”;
Claim 22 lines 2-3, the recitation “an electric machine” should be changed to “the electric machine”;
Claim 22 line 3, the recitation “a braking torque” should be changed to “the braking torque”;
Claim 23 lines 1-2, the recitation “a braking action” should be changed to “the braking action”;
Claim 23 line 3, the recitation “a regenerative braking torque” should be changed to “the regenerative braking torque”;
Claim 24 line 2, the recitation “a braking action” should be changed to “the braking action”;
Claim 24 line 3, the recitation “a regenerative braking torque” should be changed to “the regenerative braking torque”;
Claim 25 line 3, the recitation “a braking request” should be changed to “the braking request”;
Claim 26 line 1, the recitation “a regenerative braking torque” should be changed to “the regenerative braking torque”;
Claim 26 line 3, the recitation “a braking request” should be changed to “the braking request”;
Claim 27 lines 14-15, the recitation “a braking request” should be changed to “the braking request”;
Claim 27 line 19, the recitation “a braking action” should be changed to “the braking action”;
Claim 28 lines 14-15, the recitation “a braking request” should be changed to “the braking request”.
Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 21-26 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
Claim 21 recites the limitation "the brake booster" in line 6. There is insufficient antecedent basis for this limitation in the claim.
Claim 21 recites the limitation "the electric machine" in line 11. There is insufficient antecedent basis for this limitation in the claim.
Claims 22-26 are rejected due to their dependance upon claim 21.
The following is a quotation of 35 U.S.C. 112(d):
(d) REFERENCE IN DEPENDENT FORMS.—Subject to subsection (e), a claim in dependent form shall contain a reference to a claim previously set forth and then specify a further limitation of the subject matter claimed. A claim in dependent form shall be construed to incorporate by reference all the limitations of the claim to which it refers.
The following is a quotation of pre-AIA 35 U.S.C. 112, fourth paragraph:
Subject to the following paragraph [i.e., the fifth paragraph of pre-AIA 35 U.S.C. 112], a claim in dependent form shall contain a reference to a claim previously set forth and then specify a further limitation of the subject matter claimed. A claim in dependent form shall be construed to incorporate by reference all the limitations of the claim to which it refers.
Claim 23 is rejected under 35 U.S.C. 112(d) or pre-AIA 35 U.S.C. 112, 4th paragraph, as being of improper dependent form for failing to further limit the subject matter of the claim upon which it depends, or for failing to include all the limitations of the claim upon which it depends. The subject matter of claim 23 is recited in the now amended claim 21 (each recites forwarding a command for a braking action by the driving stability system to the electric machine). Applicant may cancel the claim(s), amend the claim(s) to place the claim(s) in proper dependent form, rewrite the claim(s) in independent form, or present a sufficient showing that the dependent claim(s) complies with the statutory requirements.
Claim Rejections - 35 USC § 102
In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis (i.e., changing from AIA to pre-AIA ) for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status.
The following is a quotation of the appropriate paragraphs of 35 U.S.C. 102 that form the basis for the rejections under this section made in this Office action:
A person shall be entitled to a patent unless –
(a)(1) the claimed invention was patented, described in a printed publication, or in public use, on sale, or otherwise available to the public before the effective filing date of the claimed invention.
Claim(s) 14 and 17-26 is/are rejected under 35 U.S.C. 102(a)(1) as being anticipated by US 2019/0135258 A1 to Chuang et al.
Re-claim 14, Chuang et al. disclose a brake control device for a vehicle, comprising:
a control device 104 connected to a brake booster device 111 (see figure 1 and paragraph 21), and to an electric machine of the vehicle 108, and to a driving stability system 110 of the vehicle (as is required by law, all new vehicle friction brake systems are required to have at least anti-lock capability, which is a stability control system);
a pedal sensor device (see paragraph 24, an electric signal is generated by the pedal) is connected to the control device and determines a pressing of a brake pedal in the vehicle (see paragraph 24 lines 17-20);
the control device is configured to: infer, from the pressing of the brake pedal, a braking request 304 by a driver,
identify an operational failure or an operational fault of the brake booster device (see at least paragraphs 28-29); and
control, based on identifying an operational failure or an operational fault of the brake booster device after and/or upon the braking request, a braking action using the driving stability system (see at least paragraphs 28-30),
the control device 104 generates a regenerative braking torque on the electric machine (via commands when the booster is determined to have failed, see paragraph 29 lines 11-15) when the operational failure or operational fault of the brake booster is identified,
the control device is further configured to forward a command for a braking action by the driving stability system to the electric machine, thus prompting the electric machine to generate the regenerative braking torque. As disclosed in paragraphs 30-31, a scenario in which the friction braking force may be insufficient to slow the vehicle (such as from the booster failure) leads to the application of regenerative brake torque to at least one axle, thus achieving the overall desired total brake force.
Re-claim 17, the control device 104 further forwards a command for the braking action by the brake booster device to the electric machine (this is understood as the intended brake boost amount that is unable to be fulfilled, as the booster is in a fail condition), thus prompting the electric machine to generate the regenerative braking torque.
Re-claim 18, the brake control device is connected to a control device 110 for a hydraulic braking action (see paragraph 21), a command for the braking action can be controlled by the driving stability system for the hydraulic braking action.
Re-claim 19, the pedal sensor device is connected to the driving stability system (see figure 1) and to the brake booster device 111, the braking request of the driver is identified by the control device using the pedal sensor device at the driving stability system and/or at the brake booster device and the generation of the regenerative braking torque is controlled.
Re-claim 20, the pedal sensor device identifies the pressing a position of the brake pedal 128, the control device 104 is configured to infer, from the pressing and/or the position of the brake pedal, an extent of the braking request and to generate the braking at least partially on the electric machine (see paragraph 24).
Re-claims 21 and 23, Chuang et al. disclose a method for operating a brake control device for a vehicle to control a braking action of the vehicle, comprising the following steps:
identifying a need to carry out the braking action with a brake control device, a pressing of a brake pedal 128 in the vehicle is identified by a pedal sensor device (see paragraph 24 and request 304) and a presence of a braking request by a driver is deduced;
identifying an operational failure or an operational fault of a brake booster device (see at least paragraphs 28-29); and
generating a braking torque and/or carrying out the braking action on and/or by a driving stability system on the vehicle in the event of and/or after an identified operational failure or an operational error of the brake booster device (paragraph 29);
generating a regenerative braking torque on an electric machine when the operational failure or operational fault of the brake booster device is identified; and
forwarding a command for the braking action by the driving stability system to the electric machine, thus prompting the electric machine to generate the regenerative braking torque. As disclosed in paragraphs 30-31, a scenario in which the friction braking force may be insufficient to slow the vehicle (such as from the booster failure) leads to the application of regenerative brake torque to at least one axle, thus achieving the overall desired total brake force.
Re-claim 22, a necessary value of a total braking torque is determined (see paragraph 26) and the regenerative braking torque is requested from the electric machine and generated, the braking torque is requested from the driving stability system at a braking device and generated, so that a sufficient total braking torque that satisfies a preset value is generated.
Re-claim 24, the control device 104 further forwards a command for the braking action by the brake booster device to the electric machine (this is understood as the intended brake boost amount that is unable to be fulfilled, as the booster is in a fail condition), thus prompting the electric machine to generate the regenerative braking torque.
Re-claim 25, the pedal sensor device identifies the pressing a position of the brake pedal 128, the control device 104 is configured to infer, from the pressing and/or the position of the brake pedal, an extent of a braking request and to generate the braking at least partially on the electric machine (see paragraph 24).
Re-claim 26, as disclosed in paragraphs 29-31, a cooperative brake control involving hydraulic pressure and regenerative braking is carried out when necessary or possible.
Re-claim 27, Chuang et al. disclose a brake control device for a vehicle, comprising:
a control device 104 connected to a brake booster device 111 (see figure 1 and paragraph 21), and to an electric machine of the vehicle 108, and to a driving stability system 110 of the vehicle (as is required by law, all new vehicle friction brake systems are required to have at least anti-lock capability, which is a stability control system);
a pedal sensor device (see paragraph 24, an electric signal is generated by the pedal) is connected to the control device and determines a pressing of a brake pedal in the vehicle (see paragraph 24 lines 17-20);
the control device is configured to: infer, from the pressing of the brake pedal, a braking request 304 by a driver,
identify an operational failure or an operational fault of the brake booster device (see at least paragraphs 28-29); and
control, based on identifying an operational failure or an operational fault of the brake booster device after and/or upon the braking request, a braking action using the driving stability system (see at least paragraphs 28-30),
the control device 104 generates a regenerative braking torque on the electric machine (via commands when the booster is determined to have failed, see paragraph 29 lines 11-15) when the operational failure or operational fault of the brake booster is identified,
the control device 104 is further configured to forward a command for a braking action by the brake booster device to the electric machine, thus prompting the electric machine to generate the regenerative braking torque. An identified brake booster device failure is unable to carry out any commanded brake action, thus the command is forwarded to the electric machine. As such the regenerative braking torque makes up for any reduced braking force that results from the brake booster when in a failed condition.
Re-claim 28, Chuang et al. disclose a brake control device for a vehicle, using which a braking action of the vehicle can be controlled, the brake control device comprising:
a control device 104 is connected to a brake booster device, an electric machine of the vehicle, and to a driving stability system (interpreted as the friction braking system 110) of the vehicle;
a pedal sensor device (paragraph 24) determines a pressing of a brake pedal and/or a gas pedal in the vehicle;
the control device is configured to: infer, from the pressing of the brake pedal and/or gas pedal, a braking request by a driver,
identify an operational failure or an operational fault of the brake booster device (see paragraphs 28-29); and
control, based on identifying the operational failure or the operational fault of the brake booster device after and/or upon a braking request, a braking action using the driving stability system, the pedal sensor device is connected to the driving stability system and/or the brake booster device, the brake request is recognized by the control device via the connection of the pedal sensor device to the driving stability system and/or the brake booster device, thereby enabling control of a generation of a regenerative braking torque in the brake control device. Various scenarios are disclosed in paragraphs 30-32 in which a friction brake and regenerative brake blend operation are carried out, including during periods when a booster has failed (as indicated in paragraph 29).
Response to Arguments
Applicant's arguments filed September 14, 2026 have been fully considered but they are not persuasive. The remarks regarding “the control device is configured to forward a command for a braking action by the driving stability system to the electric machine, thereby prompting the electric machine to generate the regenerative braking torque” can be interpreted in such a manner that the control device is commanding the electric machine to carry out the regenerative braking torque that is substantially equal to the braking torque that would have been carried out by the driving stability system if the booster was in operating condition. The driving stability system is broadly interpreted as any frictional brake system as known in the art, particularly one that contains inlet and outlet valves for adjusting a wheel brake force. The instant disclosure fails to provide any specific details of the driving stability system, and as noted above, any vehicles sold in the US today are required to have at least anti-lock brake systems, which at the very least provide increased vehicle stability during braking events.
As best understood by the Office, the control device is merely any common electronic control unit with processors for carrying out braking instructions in accordance with a driver brake request. The driving stability system is broadly interpreted as any friction brake system, such as a hydraulic brake system that includes at least fluid control valves for carrying out stability control such as anti-lock or anti-skid control, which as previously indicated is generally available and required on all new vehicles. Therefore it is the position of the Office that any generic friction brake system can be interpreted as a driving stability system. Furthermore, the phrase “driving stability system” can be interpreted as any system that maintains the vehicle in a stable manner, which in essence is any brake system.
As previously pointed out, the instant disclosure does not identify in detail the driving stability system, or provide any examples of a specific arrangement, such as having a separate control unit or how this system supposedly commands the electric machine to carry out regenerative braking. Generally speaking, the vehicle brake control unit (ECU) would carry out and generate such commands. As such the remarks regarding specifics of the driving stability system are more specific than the claim language, and the rejection is maintained.
Conclusion
THIS ACTION IS MADE FINAL. Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a).
A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action.
Any inquiries concerning this communication or earlier communications from the
examiner should be directed to Thomas Williams whose telephone number is 571-272-7128.
The examiner can normally be reached on Tuesday-Friday from 6:00 AM to 4:00 PM.
If attempts to reach the examiner by telephone are unsuccessful, the examiner's
supervisor, Robert Siconolfi, can be reached at 571-272-7124. The fax phone number for the
organization where this application or proceeding is assigned is 571-273-8300.
Any inquiry of a general nature or relating to the status of this application or proceeding
should be directed to the receptionist whose telephone number is 571-272-6584.
TJW /THOMAS J WILLIAMS/ Primary Examiner, Art Unit 3616 October 29, 2026