Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
DETAILED ACTION
1. Claims 30-64 are currently pending.
Election/Restrictions
2. Applicant’s election of Group II claims 53-64 in the reply filed on June 18, 2026 is acknowledged. Because applicant did not distinctly and specifically point out the supposed errors in the restriction requirement, the election has been treated as an election without traverse (MPEP § 818.01(a)). Claims 30-52 are withdrawn from further consideration pursuant to 37 CFR 1.142(b) as being drawn to a nonelected invention, there being no allowable generic or linking claim. Election was made without traverse in the reply filed on June 18, 2026. Claims 53-64 are currently under examination.
Priority
3. Receipt is acknowledged of certified copies of papers required by 37 CFR 1.55.
Information Disclosure Statement
4. The information disclosure statement (IDS) submitted on November 21, 2024; July 18, 2024; March 28, 2024; December 1, 2023 is in compliance with the provisions of 37 CFR 1.97. Accordingly, the information disclosure statement is being considered by the examiner. An initialed copy is attached hereto.
Claim Objections
5. Claim 53 is objected to because of the following informalities: The claim, in part, has been copied below.
PNG
media_image1.png
436
911
media_image1.png
Greyscale
The subsections are misnumbered going from (i) to (iv) to (ix). It should be (i), (ii) and (iii). Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
6. Claims 53-84 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention.
Independent claim 53 is drawn to a recombinant L-leucine-producing microorganism, comprising in a forcibly expressible manner:
A gene encoding a mutant type acetolactate synthase that has resistance to feedback inhibition of enzyme activity by at least one of valine, leucine and isoleucine;
A gene encoding a mutant type 2-isopropylmalate synthase that has resistance to feedback inhibition of enzyme activity by L-leucine, and
A gene encoding an amino acid dehydrogenase having at least catalytic activity on an L-leucine production reaction, wherein
an ilvE gene or an ortholog thereof present on the genome has been inactivated or deficient in the recombinant microorganism.
The MPEP states that the purpose of the written description requirement is to ensure that the inventor had possession, as of the filing date of the application, of the specific subject matter later claimed. The MPEP lists factors that can be used to determine if sufficient evidence of possession has been furnished in the disclosure of the application. These include “level of skill and knowledge in the art, partial structure, physical and/or chemical properties, functional characteristics alone or coupled with a known or disclosed correlation between structure and function, and the method of making the claimed invention.”
The written description requirement for a claimed genus may be satisfied through sufficient description of a representative number of species by actual reduction to practice, disclosure of drawings, or by disclosure of relevant identifying characteristics, for example, structure or other physical and/or chemical properties, by functional characteristics coupled with a known or disclosed correlation between function and structure, or by a combination of such identifying characteristics, sufficient to show the Applicants were in possession of the claimed genus.
The instant claims are drawn to a recombinant L-leucine-producing microorganism. Said microorganism is required to comprises genes encoding a mutant type acetolactate synthase that has resistance to feedback inhibition of enzyme activity by at least one of valine, leucine and isoleucine; genes encoding a mutant type 2-isopropylmalate synthase that has resistance to feedback inhibition of enzyme activity by L-leucine, and genes encoding an amino acid dehydrogenase having at least catalytic activity on an L-leucine production reaction. Describing the specific mutations necessary is pivotal. The breadth of the claims which envisions and contemplates amino acid sequences having at least one amino acid substitutions; as well as claims with amino acid sequences having at least 60% (as well as 85%) sequence identity to any of the amino acid sequences having at least one amino acid substitutions. Additionally, the claims envision amino acid sequences having deletions, substitutions and/or additions to one or more amino acids and in some instances deletions, substitutions and/or additions to 1 to 50 acids relative to an amino acid sequence.
As it pertains to the breadth of the claims as identified above, it is unclear exactly what level of sequence identity is required, and whether that percentage includes the variations at specific amino acid residues named in the instant claims. These proteins are required to perform specific functions. The instant specification recognizes and describes SEQ ID NOs: 2-8, 10, 12-16, 18-22, 24, 26-30 and 32, and in some cases those particular sequences with specific and select point mutations. However, the species do not represent the very vast breadth of the encompassed proteins. The disclosure does not set forth any required structure that correlates to the required function. Instead, any amino acids may be varied, with the possible exception of the mutations required at specific locations including positions 51, 124, 310, 40, 113, 291, and 294. To give an idea of the breadth of the encompassed genera, 15% variation in one of the named sequences would allow at least 57 amino acids of 380 to be mutated, added, or deleted. This example will not factor in the possible additional variation from the phrase “at least” or the named mutation in dependent claims that may be in addition to the required level of sequence identity. Varying any 57 amino acid positions within one of the SEQ ID NOs would produce 1 x 1057 different proteins. The total number of possible variants is enormous, even for just one of the variant proteins listed in the claims. These peptides have no correlation between their structure and function because the specification provides no guidance regarding which variants are capable of the required function. Therefore, the specification provides insufficient written description to support the genus encompassed by the claim. Vas-Cath Inc. v. Mahurkar, 19 USPQ2d 1111, makes clear that "applicant must convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention. The invention is, for purposes of the 'written description' inquiry, whatever is now claimed." (See page 1117.) The specification does not "clearly allow persons of ordinary skill in the art to recognize that [he or she] invented what is claimed." (See Vas-Cath at page 1116.)
With the exception of full-length recited sequences, the skilled artisan cannot envision the detailed chemical structure of the encompassed polypeptides, regardless of the complexity or simplicity of the method of isolation. Adequate written description requires more than a mere statement that it is part of the invention and reference to a potential method for isolating it. The nucleic acid and/or protein itself is required. See Fiers v. Revel, 25 USPQ2d 1601, 1606 (CAFC 1993) and Amgen Inc. V. Chugai Pharmaceutical Co. Ltd., 18 USPQ2d 1016. In Fiddes v. Baird, 30 USPQ2d 1481, 1483, claims directed to mammalian FGF's were found unpatentable due to lack of written description for the broad class. The specification provided only the bovine sequence.
University of California v. Eli Lilly and Co., 43 USPQ2d 1398, 1404. 1405 held that:
...To fulfill the written description requirement, a patent specification must describe an invention and does so in sufficient detail that one skilled in the art can clearly conclude that "the inventor invented the claimed invention." Lockwood v. American Airlines Inc. , 107 F.3d 1565, 1572, 41 USPQ2d 1961, 1966 (1997); In re Gosteli , 872 F.2d 1008, 1012, 10 USPQ2d 1614, 1618 (Fed. Cir. 1989) (" [T]he description must clearly allow persons of ordinary skill in the art to recognize that [the inventor] invented what is claimed."). Thus, an applicant complies with the written description requirement "by describing the invention, with all its claimed limitations, not that which makes it obvious," and by using "such descriptive means as words, structures, figures, diagrams, formulas, etc., that set forth the claimed invention." Lockwood, 107 F.3d at 1572, 41 USPQ2datl966.
Protein chemistry is one of the most unpredictable areas of biotechnology. Consequently, the effects of sequence dissimilarities upon protein structure and function cannot be predicted. Bowie et al. (Science, 1990, 247:1306-1310) teach that an amino acid sequence encodes a message that determines the shape and function of a protein and that it is the ability of these proteins to fold into unique three-dimensional structures that allows them to function and carry out the instructions of the genome and further teaches that the problem of predicting protein structure from sequence data and in turn utilizing predicted structural determinations to ascertain functional aspects of the protein is extremely complex (column 1, page 1306). Bowie et al. further teach that while it is known that many amino acid substitutions are possible in any given protein, the position within the protein's sequence where such amino acid substitutions can be made with a reasonable expectation of maintaining function are limited. Certain positions in the sequence are critical to the three-dimensional structure/function relationship and these regions can tolerate only conservative substitutions or no substitutions at all (column 2, page 1306). The sensitivity of proteins to alterations of even a single amino acid in a sequence are exemplified by Burgess et al. (J. Cell Biol. 111:2129-2138, 1990) who teach that replacement of a single lysine reside at position 118 of acidic fibroblast growth factor by glutamic acid led to the substantial loss of heparin binding, receptor binding and biological activity of the protein and by Lazar et al. (Mol. Cell. Biol., 8:1247-1252, 1988) who teach that in transforming growth factor alpha, replacement of aspartic acid at position 47 with alanine or asparagine did not affect biological activity while replacement with serine or glutamic acid sharply reduced the biological activity of the mitogen. These references demonstrate that even a single amino acid substitution will often dramatically affect the biological activity and characteristics of a protein.
Additionally, Bork (Genome Research, 2000,10:398-400) clearly teaches the pitfalls associated with comparative sequence analysis for predicting protein function because of the known error margins for high-throughput computational methods. Bork specifically teaches that computational sequence analysis is far from perfect, despite the fact that sequencing itself is highly automated and accurate (p. 398, column 1). One of the reasons for the inaccuracy is that the quality of data in public sequence databases is still insufficient. This is particularly true for data on protein function. Protein function is context dependent, and both molecular and cellular aspects have to be considered (p. 398, column 2). Conclusions from the comparison analysis are often stretched with regard to protein products (p. 398, column 3). Further, although gene annotation via sequence database searches is already a routine job, even here the error rate is considerable (p. 399, column 2). Most features predicted with an accuracy of greater than 70% are of structural nature and, at best, only indirectly imply a certain functionality (see legend for table 1, page 399). As more sequences are added and as errors accumulate and propagate it becomes more difficult to infer correct function from the many possibilities revealed by database search (p. 399, paragraph bridging columns 2 and 3). The reference finally cautions that although the current methods seem to capture important features and explain general trends, 30% of those features are missing or predicted wrongly. This has to be kept in mind when processing the results further (p. 400, paragraph bridging cols 1 and 2).
Given not only the teachings of Bowie et al., Lazar et al. and Burgess et al. but also the limitations and pitfalls of using computational sequence analysis and the unknown effects of alternative splicing, post translational modification and cellular context on protein function as taught by Bork, the claimed proteins could not be predicted based on sequence identity. Clearly, it could not be predicted that the polypeptide or variant that shares only partial homology with a disclosed protein or that is a fragment of a given SEQ ID NO. will function in a given manner. Therefore, only SEQ ID NO: 2-8, 10, 12-16, 18-22, 24, 26-30 and 32, but not the full breadth of the claims, meet the written description provision of 35 USC 112, first paragraph.
Adequate written description requires more than a mere statement that is part of the invention. See Fiers v. Revel, 25 USPQ2d 1601, 1606 (CAFC 1993) and Amgen Inc. v. Chungai Pharmaceutical Co. Ltd., 18 USPQ2d 1016. In Fiddes v. Baird, 30 USPQ2d 1481, 1483, claims directed to mammalian FGF's were found unpatentable due to lack of written description for the broad class. The specification provided only the bovine sequence.
The University of California v. Eli Lilly and Co., 43 USPQ2d 1398, 1404, 1405 held that: …To fulfill the written description requirement, a patent specification must describe an invention and does so in sufficient detail that one skilled in the art can clearly conclude that “the inventor invented the claimed invention.” Lockwood v. American Airlines Inc. 107 F.3d 1565, 1572, 41 USPQ2d 1961, 1966 (1997); In re Gosteli, 872 F.2d 1008, 1012, 10 USPQ2d 1614, 1618 (Fed. Cir. 1989) ("[T]he description must clearly allow persons of ordinary skill in the art to recognize that [the inventor] invented what is claimed."). Thus, an Applicant complies with the written description requirement "by describing the invention, with all its claimed limitations, not that which makes it obvious," and by using "such descriptive means as words, structures, figures, diagrams, formulas, etc., that set forth the claimed invention." Lockwood, 107 F.3d at 1572, 41 USPQ2dat1966.
MPEP § 2163.02 states, “[a]n objective standard for determining compliance with the written description requirement is, 'does the description clearly allow person of ordinary skill in the art to recognize that he or she invented what is claimed’”. The courts have decided: the purpose of the "written description" requirement is broader than to merely explain how to "make and use"; the Applicant must convey with reasonable clarity to those skilled in the art, that as of the filing date sought, he or she was in possession of the invention. The invention is for purposes of the “written description” inquiry, whatever is now claimed. See Vas-Cath, Inc v. Mahurkar, 935 F.2d 1555, 1563-64, 19 USPQ2d 1111, 1117 (Federal Circuit, 1991).
Furthermore, the written description provision of 35 USC §112 is severable from its enablement provision; and adequate written description requires more than a mere statement that it is part of the invention and reference to a potential method for isolating it. Fiers v. Revel, 25 USPQ2d 1601, 1606 (CAFC 1993). And Amgen Inc. v. Chugai Pharmaceutical Co. Ltd., 18 USPQ2d 1016. The Guidelines for Examination of Patent Applications under the 35 USC §112 paragraph 1, “Revision 1” of Written Description Requirement (66 FR 1099-1111, March 25, 2008) state, “[p]ossession may be shown in a variety of ways including description of an actual reduction to practice, or by showing the invention was 'ready for patenting' such as by disclosure of drawings or structural chemical formulas that show that the invention was complete, or by describing distinguishing identifying characteristics sufficient to show that the Applicant was in possession of the claimed invention (ld. At 1104). Moreover, an adequate written description of the claimed invention must include sufficient description of at least a representative number of species by actual reduction to practice, reduction to drawings, or by disclosure of relevant, identifying characteristics sufficient to show that Applicant was in possession of the claimed genus. However, factual evidence of an actual reduction to practice has not been disclosed by Applicant in the specification; nor has Applicant shown the invention was “ready for patenting” by disclosure of drawings or structural chemical formulas that show that the invention was complete; nor has the Applicant described distinguishing identifying characteristics sufficient to show that Applicant were in possession of the claimed invention at the time the application was filed.
Therefore, for all these reasons the specification lacks adequate written description, and one of skill in the art cannot reasonably conclude that Applicant had possession of the claimed invention at the time the instant application was filed.
Conclusion
7. No claim is allowed.
8. The closest prior art made of record and not relied upon is considered pertinent to applicant's disclosure.
Feng et al., Molecules, 2018; 23(2102): 1-13, which teaches L-Leucine production in Corynebacterium together with ΔilvE and AHAS but does not teach genes encoding a mutant type 2-isopropylmalate synthase and amino acid dehydrogenase.
JP2006271379 teaches functionally modified phenylalanine dehydrogenase and comprises at least 100% sequence identity shown as SEQ ID NO: 2 and 12 as well as fragments of others.
WO 2021/037190 A1 teaches all limitations of claim 53, except for the limitation around ΔilvE.
9. Any inquiry concerning this communication or earlier communications from the examiner should be directed to LAKIA J JACKSON-TONGUE whose telephone number is (571)272-2921. The examiner can normally be reached Monday-Friday 930AM-530PM.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Anne Gussow can be reached at (571) 272-6047. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/LAKIA J JACKSON-TONGUE/Examiner, Art Unit 1645 August 26, 2026
/BRIAN GANGLE/Primary Examiner, Art Unit 1645
Prosecution Insights