DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16th, 2013 is being examined under the first inventor to file provisions of the AIA .
Information Disclosure Sheet
The information disclosure statements (IDS’s) submitted on 05/14/2024, 07/11/2025, and 09/28/2026 are in compliance with the provisions of 37 CFR 1.97. Accordingly, the information disclosure statement is being considered by the examiner.
Claim Objections
Claims 17, 19, 24, 26, and 32 are objected to because of the following informalities:
Regarding claims 17, 19, 24, and 26, these claims are objected to because the claims utilize a slash (“/”) between claim elements. The use of a slash is objected to because it can be interpreted as meaning “and,” “or,” or “and/or,” thereby introducing ambiguity into the claim language. To overcome this objection, applicant can amend the claims to use clear alternative or conjunctive language in lieu of a slash (“/”).
Regarding claim 32, this claim is objected to because the claim appears to contain a typographical error consisting of an unnecessary comma after the word “wherein” in the limitation “wherein, all process-related setting variables…”
Appropriate correction is required.
Claim Rejections – 35 USC §112(a)
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
Claim 25 is rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention. Specifically, claim 25 requires that “instead of the switchover height, an electrode travel path is defined as a switchover criterion.” However, the specification explicitly teaches the opposite. Paragraph [0020] of the specification states: “The predetermined switch-off height of each segment, rather than the sinking path during energization, can thus be used as the switchover criterion for a segment.” Because the specification expressly teaches away from using the sinking path (i.e., the electrode travel path) in the place of the switch-off height, the original disclosure fails to demonstrate possession of the alternative method recited in claim 25.
Claim Rejections – 35 USC §112(b)
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
Claims 22, 28, and 32 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, or for pre-AIA the applicant regards as the invention.
Regarding claim 22, the claim recites that the shaped part is coated with a metal that is “metallurgically very similar” to a material of the strand. The term “very similar” is a relative term of degree. The specification does not provide a standard for ascertaining the requisite degree, nor does it provide a baseline or objective metric for measuring or determining what qualifies as being “metallurgically very similar.” Therefore, one of ordinary skill in the art would not be able to ascertain the scope of the claim.
Regarding claim 28, the claim recites that “contact surfaces of electrodes relative to the component are different in each case.” The phrase “different in each case” is ambiguous. It is unclear whether this limitation means the contact surface of an upper electrode is different from the contact surface of an opposing lower electrode (as suggested by the exemplary embodiment in paragraph [0061] of the specification), whether the contact surfaces differ from one assembled component to the next, or whether they are different across the respective sequence segments.
Regarding claim 32, the claim recites recording “all process-relevant setting variables and measured values.” The term “process-relevant” is subjective and lacks clear boundaries. Whether a variable is “relevant” is a matter of opinion that may vary depending on the operator or the specific proprietary parameters of a given machine. The specification fails to define a closed set of variables that constitute a “process-relevant” variable, leaving the exact scope of the recording step undefined.
Allowable Subject Matter
If the above rejections under 35 USC 112(a) and 112(b) are overcome, claims 17-32 would be deemed allowable. The following is a statement of reasons for the indication of allowable subject matter:
Takano (US 5,973,287) teaches a method for producing a hot crimp connection between a shaped part (30’) and at least one wire (30) with the following steps run sequentially: producing a diffusion connection and/or an at least partial fusion connection between the inner wires of the strand, which have been freed from the insulating layer by the compaction (see col 6, lines 12-41), and current-less cooling of the hot-crimped composite, whereby a switch between at least two consecutive segments takes place after reaching a segment-specific height position and/pr after an energy/charge has been fed in (see col 6, lines 42-59). However, Takano does not specifically teach producing a first connection between the shaped part and an outer layer of the strand by a complete and/or partial eutectic melting process of outer wires of the strand which have been freed by concurrently compacting and/or predeforming an insulating layer, as claimed in claim 17.
Conclusion
Any inquiry concerning this communication or earlier communications from the examiner should be directed to JACOB A SMITH whose telephone number is (571) 272-3974 and email address is Jacob.Smith@uspto.gov. The examiner can normally be reached on M-F 7:30AM - 5:30PM.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Anna Kinsaul can be reached at (571) 270-1926. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/JACOB A SMITH/Examiner, Art Unit 3731