DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status.
Claims 1-20 are pending.
Election/Restrictions
Applicant’s election, without traverse, of Group I, claims 1-6, 11-17 and the following species in the reply filed on 06/17/26 is acknowledged.
PNG
media_image1.png
118
511
media_image1.png
Greyscale
Claim(s) 7-10, 18-20 is/are withdrawn from further consideration pursuant to 37 CFR 1.142(b) as being drawn to a nonelected subject matter, there being no allowable generic or linking claim. Election was made without traverse in the reply filed on 06/17/26.
Claim Rejections - 35 USC § 112(b)/second paragraph
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claim(s) 1-6, 11-17 is/are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, or for pre-AIA the applicant regards as the invention.
Claim 1 recites a molecular weight but it is unclear if this is the molecular weight of the overall polymer or of the polymerizable monomer (I) that is recited immediately preceding the MW limitation.
Claims 4, 12 and 13 recite “preferably” which makes it unclear if the corresponding limitation is required or optional.
The rest of the rejected claims not specifically addressed above are rejected because they depend from one of the claims specifically addressed above and therefore include the same indefiniteness issue(s) via their dependency.
Claim Rejections - 35 USC § 103
In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status.
If this application currently names joint inventors: in considering patentability of the claims the examiner presumes that the subject matter of the various claims was commonly owned as of the effective filing date of the claimed invention(s) absent any evidence to the contrary. Applicant is advised of the obligation under 37 CFR 1.56 to point out the inventor and effective filing dates of each claim that was not commonly owned as of the effective filing date of the later invention in order for the examiner to consider the applicability of 35 U.S.C. 102(b)(2)(C) for any potential 35 U.S.C. 102(a)(2) prior art against the later invention.
The following is a quotation of 35 U.S.C. 103 which forms the basis for all obviousness rejections set forth in this Office action:
A patent for a claimed invention may not be obtained, notwithstanding that the claimed invention is not identically disclosed as set forth in section 102, if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains. Patentability shall not be negated by the manner in which the invention was made.
The factual inquiries set forth in Graham v. John Deere Co., 383 U.S. 1, 148 USPQ 459 (1966), that are applied for establishing a background for determining obviousness under 35 U.S.C. 103 are summarized as follows:
Determining the scope and contents of the prior art.
Ascertaining the differences between the prior art and the claims at issue.
Resolving the level of ordinary skill in the pertinent art.
Considering objective evidence present in the application indicating obviousness or nonobviousness.
When something is indicated as being “obvious” this should be taken as shorthand for “prima facie obvious to one having ordinary skill in the art to which the claimed invention pertains before the effective filing date of the invention”.
When a range is indicated as overlapping a claimed range, unless otherwise noted, this should be taken as short hand to indicate that the claimed range is obvious in view of the overlapping range in the prior art as set forth in MPEP 2144.05, in the case where the claimed range “overlap or lie inside ranges disclosed by the prior art”, a prima facie case of obviousness exists, In re Wertheim, 541 F.2d 257, 191 USPQ 90 (CCPA 1976); In re Woodruff, 919 F.2d 1575, 16 USPQ2d 1934 (Fed. Cir. 1990).
Claim(s) 1-6, 11-17 is/are rejected under 35 U.S.C. 103 as being unpatentable over Hamazaki (JP 2018-199765, see machine translation) in view of Moad (U.S. 2007/0072979).
Regarding claims 1-6, 11-17, Hamazaki teaches a amphiphilic leveling/surface tension reducing polymer formed from a monomer overlapping claim 2, 3, and 11 (and the elected species, see formula I), as well as an acrylate monomer having polyethylene oxide with terminal hydroxyl group (see formula III) that overlaps claims 4, 12 and 13 and corresponds to the elected species (except it has ethylene oxide repeating units, not propylene oxide repeating units, but that is obvious as explained below), with both monomers being present in the final polymer at amounts overlapping claims 1, 5, 14-16, and without any fluorine atoms as in claims 6 and 17, and with a molecular weight overlapping claim 1 ([0004], [0008]-[0011], [0018]).
Regarding the claimed polypropylene oxide repeating units in the second monomer, although Hamazaki only teaches polyethylene oxide repeating units for the amphiphilic polymer, polypropylene oxide repeating units are prima facie homologues of the polyethylene oxide repeating units in the formula III monomer. See MPEP 2144.09 II. Compounds which are position isomers (compounds having the same radicals in physically different positions on the same nucleus) or homologs (compounds differing regularly by the successive addition of the same chemical group, e.g., by -CH2- groups) are generally of sufficiently close structural similarity that there is a presumed expectation that such compounds possess similar properties. In re Wilder, 563 F.2d 457, 195 USPQ 426 (CCPA 1977). See also In re May, 574 F.2d 1082, 197 USPQ 601 (CCPA 1978) (stereoisomers prima facie obvious).
As explained in the preceding paragraph, the claimed polypropylene oxide repeating units are prima facie obvious as a matter of law, but Moad further confirms the obviousness by teaching that polyalkylene oxide acrylic polymers (i.e., generic with respect to the type of alkylene oxide group) are expected to provide amphiphilic properties, with ethylene, propylene, and butylene oxide repeating units being specifically suggested as such polyalkylene oxide units ([0112]-[0113]) such that the polypropylene oxide repeating units would have been obvious to substitute for the ethylene oxide in Hamazaki based on Moad teaching that they would also provide the desired amphiphilic properties.
Conclusion
References cited in any corresponding foreign applications have been considered but would be cumulative to the above. Any inquiry concerning this communication or earlier communications from the examiner should be directed to MICHAEL B NELSON whose direct telephone number is (571)272-9886 and whose direct fax number is (571)273-9886 and whose email address is Michael.Nelson@USPTO.GOV. The examiner can normally be reached on Mon-Sat, 7am - 7pm.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Callie Shosho can be reached on 571-272-1123. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300 (faxes sent to this number will take longer to reach the examiner than faxes sent to the direct fax number above).
Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/MICHAEL B NELSON/
Primary Examiner, Art Unit 1787
Prosecution Insights