DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Election/Restrictions
Applicant’s election without traverse of Invention I and Species B in the reply filed on 8/31/2026 is acknowledged. Claims 10-20 are withdrawn from further consideration pursuant to 37 CFR 1.142(b) as being drawn to a nonelected Invention II, there being no allowable generic or linking claim. Election was made without traverse in the reply filed on 8/31/2026. The requirement is deemed proper and is therefore made FINAL.
Claim Objections
Claim 7 is objected to because of the following informalities: a misplaced dash in line 2. Appropriate correction is required.
Double Patenting
The nonstatutory double patenting rejection is based on a judicially created doctrine grounded in public policy (a policy reflected in the statute) so as to prevent the unjustified or improper timewise extension of the “right to exclude” granted by a patent and to prevent possible harassment by multiple assignees. A nonstatutory double patenting rejection is appropriate where the conflicting claims are not identical, but at least one examined application claim is not patentably distinct from the reference claim(s) because the examined application claim is either anticipated by, or would have been obvious over, the reference claim(s). See, e.g., In re Berg, 140 F.3d 1428, 46 USPQ2d 1226 (Fed. Cir. 1998); In re Goodman, 11 F.3d 1046, 29 USPQ2d 2010 (Fed. Cir. 1993); In re Longi, 759 F.2d 887, 225 USPQ 645 (Fed. Cir. 1985); In re Van Ornum, 686 F.2d 937, 214 USPQ 761 (CCPA 1982); In re Vogel, 422 F.2d 438, 164 USPQ 619 (CCPA 1970); In re Thorington, 418 F.2d 528, 163 USPQ 644 (CCPA 1969).
A timely filed terminal disclaimer in compliance with 37 CFR 1.321(c) or 1.321(d) may be used to overcome an actual or provisional rejection based on nonstatutory double patenting provided the reference application or patent either is shown to be commonly owned with the examined application, or claims an invention made as a result of activities undertaken within the scope of a joint research agreement. See MPEP § 717.02 for applications subject to examination under the first inventor to file provisions of the AIA as explained in MPEP § 2159. See MPEP § 2146 et seq. for applications not subject to examination under the first inventor to file provisions of the AIA . A terminal disclaimer must be signed in compliance with 37 CFR 1.321(b).
The filing of a terminal disclaimer by itself is not a complete reply to a nonstatutory double patenting (NSDP) rejection. A complete reply requires that the terminal disclaimer be accompanied by a reply requesting reconsideration of the prior Office action. Even where the NSDP rejection is provisional the reply must be complete. See MPEP § 804, subsection I.B.1. For a reply to a non-final Office action, see 37 CFR 1.111(a). For a reply to final Office action, see 37 CFR 1.113(c). A request for reconsideration while not provided for in 37 CFR 1.113(c) may be filed after final for consideration. See MPEP §§ 706.07(e) and 714.13.
The USPTO Internet website contains terminal disclaimer forms which may be used. Please visit www.uspto.gov/patent/patents-forms. The actual filing date of the application in which the form is filed determines what form (e.g., PTO/SB/25, PTO/SB/26, PTO/AIA /25, or PTO/AIA /26) should be used. A web-based eTerminal Disclaimer may be filled out completely online using web-screens. An eTerminal Disclaimer that meets all requirements is auto-processed and approved immediately upon submission. For more information about eTerminal Disclaimers, refer to www.uspto.gov/patents/apply/applying-online/eterminal-disclaimer.
Claims 1-7 and 9 are rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-21 of U.S. Patent No. 11,007,304. Please also note that while they are presently withdrawn, if claims 10-20 are rejoined, they are also subject to nonstatutory double patenting rejections over U.S. Patent Nos. 12,070,529 and 12,357,465. Although the claims at issue are not identical, they are not patentably distinct from each other because all of the structural elements and characteristics are disclosed by both sets of claims. In claim 1 of the pending application, the solid substrate of a coral or coral derivative of the application corresponds to the solid substrate of a coral or coral derivative of claims 1 and 2 of the ‘304 patent; the fluid uptake capacity and contact angle of the application corresponds to the fluid uptake capacity and contact angle of claims 1 and 2 of the patent; the conical frustum shape or pyramidal frustum shape of the application corresponds to the conical or pyramidal frustum shape of claims 1 and 2 of the patent; and the tapered sides at an angle of from 0.75 to about 4 degrees of the application corresponds to the tapered sides at an angle of from 0.75 to about 4 degrees of claims 1 and 2 of the patent. Claim 2 of the present application corresponds to claims 1 and 2 of the ‘304 patent. Claim 3 of the present application corresponds to claim 3 of the patent. Claim 4 of the present application corresponds to claim 4 of the patent. Claim 5 of the present application corresponds to claim 5 of the patent. Claim 6 of the present application corresponds to claim 19 of the patent. Claim 7 of the present application corresponds to claim 19 of the patent. Claim 9 of the present application corresponds to claim 1 of the patent.
Claim 8 is rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1 and 2 of U.S. Patent No. 11,007,304 in view of Stark (Pub. No. US 2009/0024174 A1).
U.S. Patent No. 11,007,304 discloses the claimed invention, as described above. However, it does not specifically claim that the solid substrate is formed of a single piece of coral. Stark teaches that it is well known in the art that solid substrate is formed of a single piece of coral (Figs. 1-11), for the purpose of providing the substrate with the desired configuration and mechanical properties needed for the implantation site. It would have been an obvious matter of design choice to one having ordinary skill in the art to modify the device of U.S. Patent No. 11,007,304, to be made of a single piece, as taught by Stark, in order to provide the substrate with the desired configuration and mechanical properties needed for the implantation site. Such a modification would be made with a reasonable expectation of success.
Conclusion
Any inquiry concerning this communication or earlier communications from the examiner should be directed to Ann Hu whose telephone number is (571) 272-6652. The examiner can normally be reached on Monday-Friday (9:00 am-5:30 pm EST).
If attempts to reach the examiner by telephone are unsuccessful, please contact the examiner’s supervisor, Jerrah Edwards, at (408) 918-7557. The fax phone number for the organization where this application or proceeding is assigned is (571) 273-8300.
Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/ANN HU/Primary Examiner, Art Unit 3774