Prosecution Insights
Last updated: November 04, 2026
Application No. 18/841,110

HIGH-VOLTAGE CONNECTOR

Non-Final OA §112
Filed
Aug 23, 2024
Priority
Feb 24, 2022 — CN 202220400109.4 +1 more
Examiner
LE, THANH TAM T
Art Unit
2831
Tech Center
2800 — Semiconductors & Electrical Systems
Assignee
Changchun Jetty Automotive Parts Corporation
OA Round
1 (Non-Final)
86%
Grant Probability
Favorable
1-2
OA Rounds
0m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 86% — above average
86%
Career Allowance Rate
1251 granted / 1446 resolved
+18.5% vs TC avg
Moderate +14% lift
Without
With
+13.8%
Interview Lift
resolved cases with interview
Fast prosecutor
1y 9m
Avg Prosecution
32 currently pending
Career history
1482
Total Applications
across all art units

Statute-Specific Performance

§101
0.2%
-39.8% vs TC avg
§103
35.4%
-4.6% vs TC avg
§102
39.0%
-1.0% vs TC avg
§112
21.3%
-18.7% vs TC avg
Black line = Tech Center average estimate • Based on career data from 1446 resolved cases

Office Action

§112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Drawings The drawings are objected to as failing to comply with 37 CFR 1.84(p)(5) because they do not include the following reference sign(s) mentioned in the description: no numerals for “a panel connecting hole” in claim 7; and “a connecting through-hole” in claim 8. Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance. Specification The title of the invention is not descriptive. A new title is required that is clearly indicative of the invention to which the claims are directed. The disclosure is objected to because of the following informalities: No numerals for “a panel connecting hole” in claim 7 and “a connecting through-hole” in claim 8. Appropriate correction is required. Claim Objections Claim 5, lines 1 and 2, “the number” should be --a number--; Claim Rejections - 35 USC § 112 Claim 5 is rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Claim 5, what “elastic latches” refer to? Claim 5 is confusing how are “both the number of elastic latches and the number of positioning grooves are two”? It should be --both the number of elastic latches and the number of positioning grooves are four--; Allowable Subject Matter Claims 1-10 are allowed. The following is an examiner’s statement of reasons for allowance: The claims are allowable over the prior art of record for at least the reason that the prior art fails to teach or suggest at least one elastic arm is provided in the socket housing, and the contact is capable of abutting against and making contact with the elastic arm; an elastic connecting portion formed by injection molding of the conductive plastic is provided on the plug cable, as set forth in the claimed combination. Any comments considered necessary by applicant must be submitted no later than the payment of the issue fee and, to avoid processing delays, should preferably accompany the issue fee. Such submissions should be clearly labeled “Comments on Statement of Reasons for Allowance.” Claim 5 would be allowable if rewritten to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action and to include all of the limitations of the base claim and any intervening claims. Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to THANH TAM T LE whose telephone number is (571)272-2094. The examiner can normally be reached 9AM-6PM. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Abdul Riyami can be reached at 571-270-3119. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /THANH TAM T LE/Primary Examiner, Art Unit 2831 10/23/26 thanh-tam.le@uspto.gov
Read full office action

Prosecution Timeline

Aug 23, 2024
Application Filed
Oct 27, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12785314
ELECTRICAL CONNECTOR WITH IMPROVED TERMINAL POSITIONING FEATURE
2y 9m to grant Granted Nov 03, 2026
Patent 12785322
CONNECTOR
2y 8m to grant Granted Nov 03, 2026
Patent 12776613
METHOD AND APPARATUS FOR EFFICIENT MANUFACTURE OF HIGH PERFORMANCE ELECTRONIC DEVICE WITH CABLED INTERCONNECTS
4y 3m to grant Granted Oct 27, 2026
Patent 12756146
INTERCHANGEABLE PLUG FOR A POWER ADAPTER AND METHODS FOR PROVIDING AND USING THE SAME
2y 11m to grant Granted Oct 06, 2026
Patent 12756138
MAGNETIC CONNECTOR ASSEMBLY
3y 1m to grant Granted Oct 06, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
86%
Grant Probability
99%
With Interview (+13.8%)
1y 9m (~0m remaining)
Median Time to Grant
Low
PTA Risk
Based on 1446 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month