Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Drawings
The drawings are objected to as failing to comply with 37 CFR 1.84(p)(4) because reference character “40” has been used to designate both “processing unit,” “driving scenario unit,” and “driving scenario module” (see at least the current specification, paragraphs 0063, and 0065). Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Election/Restrictions
Applicant’s election without traverse of Group I, which includes claims 1-11 in the reply filed on 06/26/2026 is acknowledged.
Claim Interpretation
The following is a quotation of 35 U.S.C. 112(f):
(f) Element in Claim for a Combination. — An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.
The following is a quotation of pre-AIA 35 U.S.C. 112, sixth paragraph:
An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.
The claims in this application are given their broadest reasonable interpretation using the plain meaning of the claim language in light of the specification as it would be understood by one of ordinary skill in the art. The broadest reasonable interpretation of a claim element (also commonly referred to as a claim limitation) is limited by the description in the specification when 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is invoked.
As explained in MPEP § 2181, subsection I, claim limitations that meet the
following three-prong test will be interpreted under 35 U.S.C. 112(f) or pre-AlA 35
U.S.C. 112, sixth paragraph:
(A) — the claim limitation uses the term “means” or “step” or a term used as a substitute for “means” that is a generic placeholder (also called a nonce term or a non- structural term having no specific structural meaning) for performing the claimed function;
(B) — the term “means” or “step” or the generic placeholder is modified by functional language, typically, but not always linked by the transition word “for” (e.g., “means for’) or another linking word or phrase, such as “configured to” or “so that’: and
(C) the term “means” or “step” or the generic placeholder is not modified by sufficient structure, material, or acts for performing the claimed function.
Use of the word “means” (or “step”) in a claim with functional language creates a rebuttable presumption that the claim limitation is to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites sufficient structure, material, or acts to entirely perform the recited function.
Absence of the word “means” (or “step”) in a claim creates a rebuttable presumption that the claim limitation is not to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is not interpreted under 35 U.S.C. 112(f) or pre-AlIA 35 U.S.C. 112, sixth
paragraph, is rebutted when the claim limitation recites function without reciting sufficient structure, material or acts to entirely perform the recited function.
Claim limitations in this application that use the word “means” (or “step”) are being interpreted under 35 U.S.C. 112(f) or pre-AlA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action. Conversely, claim limitations in this application that do not use the word “means” (or “step”) are not being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action.
This application includes one or more claim limitations that do not use the word “means,” but are nonetheless being interpreted under 35 U.S.C. 112(f) or pre-AlA 35 U.S.C. 112, sixth paragraph, because the claim limitation(s) uses a generic placeholder that is coupled with functional language without reciting sufficient structure to perform the recited function and the generic placeholder is not preceded by a structural modifier. Such claimed limitations are: “driving scenario module,” “test setting module,” and “scoring module”.
Because these claimed limitations are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, they are being interpreted to cover the corresponding structure described in the specification as performing the claimed function, and equivalents thereof.
If applicant does not intend to have these limitations interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, applicant may: (1) amend the claim limitations to avoid them being interpreted under 35 U.S.C. 112(f) or pre-AlA 35 U.S.C. 112, sixth paragraph (e.g., by reciting sufficient structure to perform the claimed function); or (2) present a sufficient showing that the claim limitations recite sufficient structure to perform the claimed function so as to avoid them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. As mentioned herein above, the claim elements: “driving scenario module,” “test setting module,” and “scoring module” are means plus function limitations that invokes 35 U.S.C. 112(f) paragraph. However, the written description fails to disclose the corresponding structure, material, or acts for the claimed functions.
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) INGENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, dear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AlA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 1-11 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AlA), first paragraph, as failing to comply with the written description requirement.
The claims contain subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor
or a joint inventor, or for pre-AlA the inventor(s), at the time the application was filed, had possession of the claimed invention.
Claim 1 recites the limitations of “driving scenario module,” “test setting module,” and “scoring module”. All of these modules are shown in Figure 2 (Notes: driving scenario module 40, testing setting module 42, and scoring module 44), and further illustrated in the current specification, and at least paragraphs 0054, 0056, 0058, 0069.
However, the specification simply repeats the language of claimed limitations. There is no disclosure in the specification of the current application of a structure for carrying out the functions of:
a. Determining various driving scenarios for the motor vehicle.
b. Determining a test setting for measuring the set of measurable scenario characteristics of each of the various driving scenarios.
c. Generating the accident risk-indexing score.
There is no evidence in the current specification that the inventor had possession of carrying out the mentioned functions by structure elements.
Claims 2-11 are rejected for the same reasons.
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AlA), second paragraph; The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1-11 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AlA), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, or for pre-AlA the applicant regards as the invention.
Regarding claim 1, the claimed limitations “driving scenario module,” “test setting module,” and “scoring module” invoke 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. However, the written description fails to disclose the corresponding structure, material, or acts for performing the entire claimed function and fails to clearly link the structure, material, or acts to the functions. There is no evidence that the specification includes a particular structure linked with the claimed functions. The specification merely repeats the function without showing any particular structure to perform the claimed functions.
Therefore, the claim is indefinite and is rejected under 35 U.S.C. 112(b) or pre- AIA 35 U.S.C. 112, second paragraph. Applicant may:
(a) Amend the claim so that the claim limitation will no longer be interpreted as a limitation under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph;
(b) Amend the written description of the specification such that it expressly recites what structure, material, or acts perform the entire claimed function, without introducing any new matter (35 U.S.C. 132(a)); or
(c) Amend the written description of the specification such that it clearly links the structure, material, or acts disclosed therein to the function recited in the claim, without introducing any new matter (35 U.S.C. 132(a)).
If applicant is of the opinion that the written description of the specification already implicitly or inherently discloses the corresponding structure, material, or acts and clearly links them to the function so that one of ordinary skill in the art would recognize what structure, material, or acts perform the claimed function, applicant should clarify the record by either: Amending the written description of the specification such that it expressly recites the corresponding structure, material, or acts for performing the claimed function and clearly links or associates the structure, material, or acts to the claimed function, without introducing any new matter (35 U.S.C. 132(a)); or (5) Stating on the record what the corresponding structure, material, or acts, which are implicitly are inherently set forth in the written description of the specification, perform the claimed function. For more information, see 37 CFR 1.75) and MPEP $§ 608.0110) and 2181.
In addition, the claim is narrative in form and replete with indefinite language. The structure which goes to make up the device must be clearly and positively specified. The structure must be organized and correlated in such a manner as to present a complete operative device. The claim must be in one sentence form only. Note the format of the claims in the patents cited. The claim is narrative in form because the following: the claim may span more than one single sentence; it is impossible to identify where the invention begins and ends.
Claims 2-11 are rejected for the same reasons.
Citation of Relevant Prior Art
The prior art made of record and not relied upon is considered pertinent to applicant disclosure. The following patent documents are cited in the PTO-892 to further show the state of the art in general: US-20230365145-A1, US-10830605-B1, US-10482226-B1, US-9495874-B1, and US-20160019434-A1.
None of the references has been found discloses or even suggests the limitations as claimed.
Conclusions
Any inquiry concerning this communication or earlier communications from the examiner should be directed to Tuan C To whose telephone number is (571) 272-6985. The examiner can normally be reached on from 6:00AM to 2:30PM.
If attempts to reach the examiner by telephone are unsuccessful, the examiner's supervisor, Ramya P Burgess, can be reached on (571) 272-6011.
The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free).
/TUAN C TO/Primary Examiner, Art Unit 3661
Prosecution Insights