DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Examiner’s Note
In amendment of specification submitted on 08/24/2026, applicant state the hybrid tomato variety 'E15B42750' (also known as 'Macapule', representative sample seed having been deposited under NCIMB Accession Number 44449) is a single cross hybrid of Enza Zaden proprietary breeding lines OT4509 and OT4516. Therefore, office hereby assumes that the parental breeding lines OT4509 and OT4516 are proprietary lines that are not available to public nor they are locus conversions of any publicly available lines.
Status of the claims
Applicant’s amendment of claims 1, 6, 12, 17 and 23 in reply filed on 08/24/2026 is acknowledged.
Claims 1-13, 17-19 and 23-25 are pending and they are examined in this office action.
Rejections that are withdrawn
Objection to specification is withdrawn in light of applicant’s amendment of specification to state the NCIMB Accession No. and the deposit date.
35 USC § 112 – Indefiniteness rejection is withdrawn in light of applicant’s amendment of claims 1, 12, 17 and 23 to recite NCIMB Accession No.
35 USC § 112 – Enablement rejection is withdrawn in light of applicant’s amendment of specification to state the NCIMB Accession No. and the deposit date.
Duty to Disclose
Applicant is reminded of their “Duty of Disclosure, Candor, and Good Faith” (see 37 C.F.R. § 1.56 and MPEP § 2001). Information that would be considered pertinent to patentability includes: 1) The plants utilized in the breeding programs that arrived at the two parental varieties crossed to produce the instant hybrid variety (meaning the grandparent varieties), as well as the specific breeding steps/techniques used to arrive at these parent varieties, 2) any progeny, siblings, half-siblings, or other closely genetically related plants that are either co-pending applications or previously published or publicly disclosed, 3) if parental varieties that were crossed to arrive at the instantly claimed variety were developed via backcrossing this should be disclosed along with the grandparents, including which grandparent was the recurrent parent along with any publications or public disclosures of the recurrent parent and what events/loci/transgenes/traits were donated from the non-recurrent parent, 5) if there is a locus converted or multiple loci converted between the deposited seeds and the seeds grown to cross to produce the hybrid seeds used for the hybrid plants grown for the trait table in the specification, then Applicant should specify which loci were converted and which traits differ when compared to plants grown from the deposited seeds, 5) any alternative designations, experimental names, tradenames, etc. for the instant plant, parent plants, and grandparent plants should be disclosed. All of this information is material to patentability. If, for example, one of the parent plants is published but with a different name/designation, then the publication should be included in the IDS along with an explanation that the different name/designation is a synonym and how this plant is related to the instantly claimed plant.
Following 35 USC § 112 -Indefiniteness rejection has been added to this office action to examine the amendment of claims 6 and 12 to recite the plant has all the morphological and physiological characteristics of tomato plant produced by growing seed designated as 'E15B42750'.
Claim Rejections - 35 USC § 112 -Indefiniteness
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 6-8 and 12 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. All dependent claims are included in these rejections unless they include a limitation that overcomes the deficiencies of the parent claim.
Regarding claims 6 and 12, the claims recite a tomato plant produced by growing the hybrid tomato variety 'E15B42750' and having all the physiological and morphological traits of the hybrid tomato variety 'E15B42750'.
Applicant’s attention is drawn to paragraph [0072] at lines 1-3, wherein the specification states:
“When the terms "tomato plant", "hybrid", "cultivar", or "tomato line" are used in the context of the present disclosure, this also includes any single gene conversions of that variety.”
specification states in paragraph 0071:
“As used herein, the term “plant” includes plant cells, plant protoplasts, plant cell tissue cultures from which tomato plants can be regenerated, plant calli, plant clumps and plant cells that are intact in plants or parts of plants, such as embryos, pollen, ovules, flowers, leaves, stems, and the like.”
In light of above, the specification does not disclose what single gene conversions are encompassed by the claimed variety. Thus, the claims encompass tomato plants that have any number of heritable traits and which differ from tomato variety 'E15B42750' as disclosed in Tables 3 and 4 by an unknown number of physiological and morphological characteristics.
The recitation renders claim indefinite. This is because the claim recites introduction of traits such as herbicide resistance, pest resistance, disease resistance, resistance to fungal disease, modified fatty acid and carbohydrate metabolism etc. as single locus conversions (page 27, paragraph 0074) which would modify the resistance levels, carbohydrate and fatty acid content and other traits in the progenies. Furthermore, the progeny would also comprise the genomic component from the another tomato variety used in the backcross during locus conversion.
Furthermore, the plant of claim 12 is regenerated from the tissue culture of claim 11 that would be culture of for example gametes such as pollens, anthers etc. that would comprise part of the genome of the hybrid tomato variety 'E15B42750', therefore the plant regenerated from the culture would not have all the traits of the hybrid tomato variety 'E15B42750'
Therefore, it is not clear how one can add such single gene conversions without altering at least one of the physiological and morphological traits in the hybrid tomato variety 'E15B42750' and how can one produce a plant have all the traits of the hybrid tomato variety 'E15B42750' regenerated from the gametes of the hybrid tomato variety 'E15B42750'.
To overcome this rejection applicants are advised to recite “…the plant has the trait conferred by single locus conversions in the hybrid tomato variety 'E15B42750' and otherwise comprise all of the physiological and morphological characteristics…..” in claim 6.
Following - 35 USC § 112 - written description requirement rejection has been maintained.
Claim Rejections - 35 USC § 112 - written description requirement
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 1-13, 17-19 and 23-25 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention.
Applicant’s attention is drawn to paragraph [0072] at lines 1-3, wherein the specification states:
“When the terms "tomato plant", "hybrid", "cultivar", or "tomato line" are used in the context of the present disclosure, this also includes any single gene conversions of that variety.”
specification states in paragraph 0071:
“As used herein, the term “plant” includes plant cells, plant protoplasts, plant cell tissue cultures from which tomato plants can be regenerated, plant calli, plant clumps and plant cells that are intact in plants or parts of plants, such as embryos, pollen, ovules, flowers, leaves, stems, and the like.”
In light of above, the specification does not disclose what single gene conversions are encompassed by the claimed variety. Thus, the claims encompass tomato plants that have any number of heritable traits and which differ from tomato variety 'E15B42750' as disclosed in Tables 3 and 4 by an unknown number of physiological and morphological characteristics.
The specification describes no structural features that distinguish plants that differ from the tomato variety 'E15B42750' in any number of traits from other tomato plants. The specification, however, only describes variety 'E15B42750' as disclosed in Tables 3 and 4. The specification fails to describe a representative number of plants with heritable traits that differ from those in variety 'E15B42750' as disclosed in Tables 3 and 4. Thus, the full scope of the claimed genus of plants has not been adequately described and is not in Applicant's possession at the time of filing. Because the claimed plants lack adequate written description, the claimed methods of using said plants also lack adequate written description. Accordingly, all claims including claims 20 and 21 are also included in the rejection.
Response to Arguments
Applicant's arguments filed 08/24/2026 have been fully considered but they are not persuasive.
Applicant argues as explained in the MPEP, "[a]n application specification may show actual reduction to practice by describing testing of the claimed invention or, in the case of certain biological materials, by specifically describing a deposit made in accordance with 37 CFR 1.801.1 wherein specification demonstrates possession through the biological deposit (Applicant’s response to rejections, page 9, last two paragraphs).
Applicant's arguments have been fully considered but they are not persuasive since applicant describes single gene converted tomato plants are developed by backcrossing and which would require parental tomato plants as donor and recurrent parent to integrate a gene (page11, paragraph 0049, paragraph 0072). Therefore an access to the parental variety would have been required to carry out the single gene conversions to produce the recited hybrid tomato 'E15B42750'. Applicant instead states in the amendment of specification of 08/24/2026 that the parental lines are proprietary breeding lines OT4509 and OT4516. Therefore there is dearth of description of the production of the hybrid tomato variety 'E15B42750' with single gene conversion using a backcross procedure as described in specification without access to the parental lines.
Claims 3-5, 7, 8 and 10 are directed to F1 progeny embryos and seed cells derived from hybrid tomato 'E15B42750'. Because ‘E15B42750’ is heterozygous at all genetic loci, the genetic composition of its F1 progeny resulting from a cross with an unidentified parent cannot be predicted. The specification does not provide data for a sufficient number of F1 progeny plants to enable a person of ordinary skill in the art to reasonably anticipate their genetic constitution or their physiological and morphological traits. Moreover, the application fails to identify distinguishing characteristics of the claimed F1 progeny. In the absence of such information, a skilled artisan cannot reliably determine the genomic structure or observable characteristics of the claimed progeny. As a result, the claims directed to plant parts and protoplasts comprising embryos and seed cells of hybrid tomato ‘E15B42750’ do not satisfy the written description requirement.
Claims 3, 4, 7, and 9-11 encompass reproductive structures—specifically pollen, pollen grains, anthers, and ovules—that contain haploid cells. These claims also fail to meet the written description requirement. Because hybrid tomato 'E15B42750' is heterozygous at every locus, meiotic division produces haploid cells with unpredictable combinations of alleles. Consequently, neither the genetic makeup of the claimed haploid cells nor the physiological or morphological characteristics of plants derived from those cells can be anticipated by a person skilled in the art. Accordingly, the claims directed to pollen, pollen grains, anthers, ovules, and other haploid cells lack adequate written description.
In summary, the specification fails to describe representative structure of the broadly claimed genus and further fails to correlate such structures to a function. The specification fails to establish structure and function correlation for a representative species as encompassed by the breadth of the claims.
Applicant’s broadly claimed genus encompasses species whose structure is unknown and hence their function is either unknown or unpredictable.
The only species described is a hybrid tomato ‘E15B42750' variety which is a F1 hybrid with specific number of characteristics as described in Tables 3-4.
The specification fails to describe representative species of Applicant’s broadly claimed genus.
There is no description of the structure required for the recited function, and no description of the necessary and sufficient elements of functional activity of diverse structures encompassed by Applicant’s broadly claimed genus is thus unknown.
One of skill in the art would not recognize that Applicant was in possession of the necessary common attributes or features of the genus in view of the disclosed species. Since the disclosure fails to describe the common attributes that identify members of the genus, and because the genus is highly variant, hybrid tomato E15B42750 variety is insufficient to describe the claimed genus.
Accordingly, there is lack of adequate description to inform a skilled artisan that applicant was in possession of the claimed invention at the time of filing. See Written Description guidelines published Federal Register/Vol.66, No. 4/Friday, January 5, 2001/Notices; p. 1099-1111.
Given the claim breadth and lack of guidance as discussed above, the specification does not provide written description of the genus broadly claimed. Accordingly, one skilled in the art would not have recognized Applicants to have been in possession of the claimed invention at the time of filing.
Response to Arguments
Applicant's arguments filed 08/24/2026 have been fully considered but they are not persuasive.
Applicant argus a skilled person in the art would not need to predict the genetic makeup of the claimed plant parts and protoplasts or the morphological and physiological characteristics of a plant produced by the embryos or seeds derived from tomato variety 'El5B42750' because the genetic information is provided by the seeds deposited under NCIMB Accession Number 44449 and the morphological and physiological characteristics are provided in the specification in paragraphs [0059]-[0061] and Table 3 (Applicant’s response to rejections, page 10, paragraph 3).
Applicant argues the genetic information is provided by the seeds deposited under NCIMB Accession Number 44449 and the morphological and physiological characteristics are provided in the specification in paragraphs [0059]-[0061] and Table 3.
Applicant's arguments have been fully considered but they are not persuasive for the following reasons:
The plant part of claim 3 encompasses F1 progeny seed and F1 embryo that are physically connected to the plant. The seed and embryo present on the plant of hybrid variety E15B42750 comprise part of the hybrid genome of variety E15B42750 due to recombination and segregation, and would produce a plant having significantly different morphological and physiological characteristics from hybrid variety E15B42750. However, it is not known what these characteristics are. Due to the reassortment of the hybrid genome of variety E15B42750, it is highly unpredictable what genotypic or phenotypic characteristics said seed and embryo have. Accordingly, the seed and embryo present on the plant lack adequate written description.
Similarly, the anther, pollen grain and ovule present on a plant of hybrid variety E15B42750 have part of the genome of said plant during the meiosis in gamete production. Because hybrid variety E15M42963 is heterozygous at every allele, it is unpredictable what combination of dominant and recessive alleles from the hybrid genome is present in each anther, pollen grain and ovule. None of the disclosed characteristics in the specification describes the morphological and physiological characteristics of an ovule, a pollen grain or an anther of hybrid variety E15B42750. While an inbred plant has two identical copies of each chromosome, hybrid variety E15B42750 does not. The deposit of seeds of tomato hybrid variety E15B42750 is not representative of these haploid cells because the claimed haploid cells are not required to be identical to the haploid cells present in the deposit. In fact, the haploid cells of the seeds in the deposit population, when grown into plants, are genetically and phenotypically distinct from each other. It is unpredictable which combination of dominant and recessive alleles are present in each haploid cell. Thus, the haploid anther, pollen grain and ovule cells present on a plant of hybrid variety E15B42750 lacks adequate written description.
MPEP 2163(I) states “a showing of possession alone does not cure the lack of a written description”. In the instant application, no information whatsoever is disclosed for the claimed F1 progeny seed/embryo or haploid anther, pollen grain and ovule of hybrid variety E15B42750. Accordingly, the rejection is maintained.
Conclusion
No claim is allowed.
The claims are free of prior art. The closest prior art is Silvertand et al. (US Patent No.: US 10,750,710 B2, Date of Patent: Aug. 25 , 2020). Silvertand et al. teaches a hybrid tomato hybrid of NUN 090220 TOF, wherein many of the morphological and physiological traits of instant tomato hybrid cultivars and the NUN 090220 TOF are similar (see cols. 25-29). However, the instant tomato hybrid cultivars and the NUN 090220 TOF differs in the disease resistance traits showed Spec, page 18-19, shape of transverse section of fruit in NUN 090220 TOF is angular, shape of blossom end is indented, pistil car is dot etc. are different from the Applicant’s tomato hybrid variety 'E15B42750'.
Applicant's amendment necessitated the new ground(s) of rejection presented in this Office action. Accordingly, THIS ACTION IS MADE FINAL. See MPEP § 706.07(a). Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a).
A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action.
Examiner’s Contact Information
Any inquiry concerning this communication or earlier communications from the examiner should be directed to SANTOSH SHARMA whose telephone number is (571)272-8440. The examiner can normally be reached Mon-Fri 8:00 AM - 5:00 PM.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, AMJAD A. ABRAHAM can be reached at (571)270-7058. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/SANTOSH SHARMA/Examiner, Art Unit 1663
/DAVID H KRUSE/Primary Examiner, Art Unit 1663