Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Information Disclosure Statement
The information disclosure statement (IDS) submitted on October 31, 2024, is in compliance with the provisions of 37 CFR 1.97. Accordingly, the information disclosure statement is being considered by the examiner.
Drawings
The drawings are not of sufficient quality to permit examination. Accordingly, replacement drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to this Office action. The replacement sheet(s) should be labeled “Replacement Sheet” in the page header (as per 37 CFR 1.84(c)) so as not to obstruct any portion of the drawing figures. If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. Namely, the resolution of Figures 4-6 is too low to allow elements of said figures to be discerned, such that Examiner is unable to clearly see where the label arrows are pointing to some elements in Figure 4, unable to read any of the text in Figure 5, and unable to read some of the text in Figure 6.
Specification
The disclosure is objected to because of the following informalities:
Paras. [0057] and [0065] recite "PPM". It appears that Applicant intends to describe "parts per million" (PPM), as described in para. [00116]. However, the specification does not expand the abbreviation PPM on the first occurrence in the specification. Applicant is required to expand all abbreviations at first occurrence with its respective abbreviation. Further, it should be noted that applicant expands abbreviation “ppm” in para. [0020] of the instant application, and uses the above abbreviations interchangeably.
The use of the terms "Wi-Fi" {para. [0007]}, "Bluetooth" {para. [0007]}, and "RS-485 MODBUS RTU" {para. [0021]}, which are a trade names or a marks used in commerce, has been noted in this application. The term should be accompanied by the generic terminology; furthermore the term should be capitalized wherever it appears or, where appropriate, include a proper symbol indicating use in commerce such as ™, SM , or ® following the term.
Although the use of trade names and marks used in commerce (i.e., trademarks, service marks, certification marks, and collective marks) are permissible in patent applications, the proprietary nature of the marks should be respected and every effort made to prevent their use in any manner which might adversely affect their validity as commercial marks.
Appropriate correction is required.
Claim Objections
Claims 1-2, 9, 22-23, 36 and 40 are objected to because of the following informalities:
Claim 1 recites “PRD” and “ppm”. It appears that Applicant intends to describe “pressure relief device” (PRD) and "parts per million" (ppm). Applicant is required to expand all abbreviations at first occurrence with its respective abbreviation. Further, claim 1 recites “selected by user”, instead of “selected by a user”.
Claim 2 recites “SW#1”. It appears that Applicant intends to describe “a first switch”. Applicant is required to expand all abbreviations at first occurrence with its respective abbreviation.
Applicant is advised that should claim 3 be found allowable, claim 9 will be objected to under 37 CFR 1.75 as being a substantial duplicate thereof. When two claims in an application are duplicates or else are so close in content that they both cover the same thing, despite a slight difference in wording, it is proper after allowing one claim to object to the other as being a substantial duplicate of the allowed claim. See MPEP § 608.01(m).
Claim 22 recites “PPM” whereas the rest of the claims recite “ppm”.
Claim 23 recites “comprise” instead of “comprises”.
Claim 36 is objected to for being multiple sentences. Each claim should only be one individual sentence. See MPEP § 608.01(m).
Claim 40 recites “valve ins configurable” instead of “valve is configurable”.
Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1-43 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
The claim(s) are narrative in form and replete with indefinite language. The structure which goes to make up the device must be clearly and positively specified. The structure must be organized and correlated in such a manner as to present a complete operative device. The claim(s) must be in one sentence form only. Note the format of the claims in the patent(s) cited.
Claim 1 recites the limitations "the regulation system", "the tank", throughout the claim. There is insufficient antecedent basis for these limitations in the claim. Further, claim 1 recites the limitation “the regulation system further comprises a Hydrogen (H2) sensor” on page 2 line 1. There is insufficient antecedent basis for this limitation in the claim, as it is unclear if the “Hydrogen (H2) sensor” differs from the “at least one hydrogen sensor” of page 1 line 9.
Claims 2-43 are dependent upon claim 1, and therefore inherit the above deficiencies.
Claim 2 recites the limitation “normal operations”, "SW#1"" throughout the claim. There is insufficient antecedent basis for these limitations in the claim.
Claims 35-36 are dependent upon claim 2, and therefore inherit the above deficiencies.
Claim 14 recites the limitation "the nitrogen blanket assembly". There is insufficient antecedent basis for this limitation in the claim.
The terms “tight” and normal” in claim 15 are relative terms which render the claim indefinite. The terms “tight” and “normal” are not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear to what degree the precision-engineered sealing mechanism must guarantee a closure in order to prevent the unwanted escape of nitrogen gas, and it is unclear what makes an operating condition “normal”.
Claim 16 recites the limitation "operators". There is insufficient antecedent basis for this limitation in the claim. It appears Applicant may intend to describe “a user” as recited in claim 1.
Claim 41 is dependent upon claim 16, and therefore inherits the above deficiencies.
The term “quick” in claim 17 is a relative term which renders the claim indefinite. The term “quick” is not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear what time requirement(s) must be met by the location of the maintenance access points during inspections and servicing.
The term “robust” in claim 18 is a relative term which renders the claim indefinite. The term “robust” is not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear what properties make the isolation valve "robust", nor what metric is used to define said qualifier.
The term “high-performance” in claim 20 is a relative term which renders the claim indefinite. The term “high-performance” is not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear what properties make the.
The term “user-friendly” in claim 23 is a relative term which renders the claim indefinite. The term “user-friendly” is not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear what properties make the.
Claim 27 recites the limitation "integrated gas sensing and regulation system". There is insufficient antecedent basis for this limitation in the claim.
The terms “durability" ” in claim 30 are relative terms which render the claim indefinite. The terms “durability" ” are not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear to what extent the protective enclosure must be durable and reliable in various operational conditions.
Claim 42 is dependent upon claim 30, and therefore inherits the above deficiencies.
Claim 31 recites the limitation "the system". There is insufficient antecedent basis for this limitation in the claim.
Claim 43 is dependent upon claim 31, and therefore inherits the above deficiencies.
Claim 32 recites the limitations "replacement cylinders" and "required pressure vessel specifications". There is insufficient antecedent basis for these limitations in the claim.
Claim 33 recites the limitations “the 3rd stage regulator supply nitrogen”. There is insufficient antecedent basis for this limitation in the claim.
The term “slight” in claim 33 is a relative term which renders the claim indefinite. The term “slight” is not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear what positive pressure between 0-2 psi is considered “slight”.
Claim 34 recites the limitation "the compound pressure gauge". There is insufficient antecedent basis for this limitation in the claim.
The term “normally” in claim 35 is a relative term which renders the claim indefinite. The term “normally” is not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear what properties make.
Claim 36 recites “P-V adjustable range”. There is insufficient antecedent basis for this limitation in the claim.
The terms “durablrobustness” in claim 37 are relative terms which render the claim indefinite. The terms “durablrobustness” are not defined by the claim, the specification does not provide a standard for ascertaining the requisite degree, and one of ordinary skill in the art would not be reasonably apprised of the scope of the invention. As written, it is unclear what properties make the.
Claim 39 recites “the valve of the gas cylinder” and “the transformer headspace”. There is insufficient antecedent basis for these limitations in the claim. Further, it is unclear which valve the Applicant is referring to.
Claim 40 recites “the pressure”. There is insufficient antecedent basis for this limitation in the claim. Further, it is unclear which pressure the Applicant is referring to.
Claim 41 recites “the internal pressure”. There is insufficient antecedent basis for this limitation in the claim. Further, it is unclear which internal pressure the Applicant is referring to.
Claim 43 recites “a transformer”. There is insufficient antecedent basis for this limitation in the claim. As written, it is unclear if “a transformer” refers to the transformer recited in claim 1, or a different transformer.
Conclusion
Due to the rejections under 35 U.S.C. § 112(b), a thorough comparison of the prior art to the instant independent claim 1 and its dependent claims 2-43 could not be reasonably made by the Examiner. The absence of a prior art rejection of instant claims 1-43 is not an indication of allowable subject matter.
The prior art made of record and not relied upon is considered pertinent to applicant's disclosure. Berler .
Any inquiry concerning this communication or earlier communications from the examiner should be directed to DANIEL QUINN whose telephone number is (571)272-2690. The examiner can normally be reached Monday - Thursday from 07:30-17:30 PST.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, JOHN BREENE can be reached at (571)272-4107. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/DANIEL M QUINN/Examiner, Art Unit 2855
/NATALIE HULS/Primary Examiner, Art Unit 2855