Prosecution Insights
Last updated: November 04, 2026
Application No. 18/978,093

FOLDING SUPPORTING BRACKET

Final Rejection §112
Filed
Dec 12, 2024
Priority
Dec 02, 2024 — CN 202422952906.5
Examiner
GARFT, CHRISTOPHER
Art Unit
3632
Tech Center
3600 — Transportation & Electronic Commerce
Assignee
Guangzhou Haichuan Technology Development Co. Ltd.
OA Round
2 (Final)
59%
Grant Probability
Moderate
3-4
OA Rounds
5m
Est. Remaining
82%
With Interview

Examiner Intelligence

Grants 59% of resolved cases
59%
Career Allowance Rate
841 granted / 1426 resolved
+7.0% vs TC avg
Strong +23% interview lift
Without
With
+23.0%
Interview Lift
resolved cases with interview
Typical timeline
2y 3m
Avg Prosecution
65 currently pending
Career history
1515
Total Applications
across all art units

Statute-Specific Performance

§101
0.3%
-39.7% vs TC avg
§103
48.0%
+8.0% vs TC avg
§102
23.2%
-16.8% vs TC avg
§112
26.7%
-13.3% vs TC avg
Black line = Tech Center average estimate • Based on career data from 1426 resolved cases

Office Action

§112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Amendment filed 7/15/2026 has been entered. Claims 1-7 remain pending in the present application. Drawings The drawings are objected to because Applicant’s claims and specification refer to the second spring as (26) and the hardware block as (27), whereas Fig. 5 for instance clearly shows the opposite (spring 27 and block 26). Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 1-7 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Re. Cl. 1, the limitation “the hardware sheets and the first springs are combined to form an anti-breakage protection mechanism” renders the claim indefinite in the Examiner’s position. Further, it is unclear what the Applicant is referring to by “anti-breakage protection mechanism.” The examiner understands that the hardware sheets (23) and spring (24) form a limiting device for the supporting frame but it is unclear how they function as an anti-breakage protection mechanism. For instance, what are the sheets and springs protecting against and how do they function to protect. In other words, it is not readily apparent what this mechanism does to serve as an anti-breakage protection mechanism. Appropriate clarification is requested. Re. Cl. 1, the limitation “push the hardware block in the sliding rails to a position below the hardware sheet” renders the claim indefinite in the Examiner’s position. As understood by the Examiner, the hardware block and springs lie below the hardware sheets and aid in keeping the supporting frame in a open, unfolded position by supporting the sliders within the rails. Further, it is the Examiner’s understanding that the hardware blocks are moved vertically along the rails are adjusted below the hardware sheets. However, the specification and figures do not sufficiently explain the functions of these structures and how they operate so that they can be properly understood. It is unclear if the hardware blocks are able to be positioned above and below the hardware sheets or if they remain below the hardware sheets consistently and generally how the function/work. It is requested that the Applicant specify how the hardware sheets functions so the metes and bounds of the claims can be properly ascertained. Allowable Subject Matter Claims 1-7 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action. Response to Arguments Applicant’s arguments, see Remarks, filed 7/15/2026, with respect to claim 1 have been fully considered and are persuasive. The prior rejection in view of Wang US 2005/0001138 and Su US 2011/0279993 has been withdrawn. Conclusion The prior art made of record and not relied upon is considered pertinent to applicant's disclosure. Poon US 2020/0162120, Park US 2010/0171671, and Liao US 9756747 disclose other known folding supports presented to the Applicant for their consideration. THIS ACTION IS MADE FINAL. Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any nonprovisional extension fee (37 CFR 1.17(a)) pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action. Any inquiry concerning this communication or earlier communications from the examiner should be directed to CHRISTOPHER E GARFT whose telephone number is (571)270-1171. The examiner can normally be reached Monday-Friday 8:00 a.m. to 5:00 p.m.. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Terrell McKinnon can be reached at (571)272-4797. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /CHRISTOPHER GARFT/Primary Examiner, Art Unit 3632
Read full office action

Prosecution Timeline

Dec 12, 2024
Application Filed
Apr 15, 2026
Non-Final Rejection mailed — §112
Jul 15, 2026
Response Filed
Sep 28, 2026
Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12774671
APPARATUS FOR PROTECTING A CATALYTIC CONVERTER
3y 6m to grant Granted Oct 27, 2026
Patent 12764442
REMOTE RADIO HEAD MOUNTING BRACKET AND METHOD FOR USE
1y 11m to grant Granted Oct 13, 2026
Patent 12752126
lamp body bracket device
1y 0m to grant Granted Oct 06, 2026
Patent 12742332
METHOD FOR CONSTRUCTING ACCESS FLOOR BY USING UNMANNED ROBOT
3y 8m to grant Granted Sep 22, 2026
Patent 12742514
DUAL PURPOSE INFORMATION HANDLING SYSTEM AND PERPHERAL DISPLAY STAND
2y 1m to grant Granted Sep 22, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

3-4
Expected OA Rounds
59%
Grant Probability
82%
With Interview (+23.0%)
2y 3m (~5m remaining)
Median Time to Grant
Moderate
PTA Risk
Based on 1426 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month