Prosecution Insights
Last updated: November 20, 2026
Application No. 18/979,689

AIR SPRING WITH A GAITER VENT

Non-Final OA §112
Filed
Dec 13, 2024
Priority
Dec 13, 2023 — EU 23465570.2 +1 more
Examiner
BURCH, MELODY M
Art Unit
3616
Tech Center
3600 — Transportation & Electronic Commerce
Assignee
Continental AG
OA Round
1 (Non-Final)
64%
Grant Probability
Moderate
1-2
OA Rounds
1y 6m
Est. Remaining
91%
With Interview

Examiner Intelligence

Grants 64% of resolved cases
64%
Career Allowance Rate
682 granted / 1060 resolved
+12.3% vs TC avg
Strong +26% interview lift
Without
With
+26.3%
Interview Lift
resolved cases with interview
Typical timeline
3y 5m
Avg Prosecution
42 currently pending
Career history
1110
Total Applications
across all art units

Statute-Specific Performance

§101
0.3%
-39.7% vs TC avg
§103
45.6%
+5.6% vs TC avg
§102
21.6%
-18.4% vs TC avg
§112
29.5%
-10.5% vs TC avg
Black line = Tech Center average estimate • Based on career data from 1060 resolved cases

Office Action

§112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Priority Receipt is acknowledged of certified copies of papers required by 37 CFR 1.55. Drawings The drawings are objected to as failing to comply with 37 CFR 1.84(p)(5) because they include the following reference character(s) not mentioned in the description: element 11 in figure 1. Corrected drawing sheets in compliance with 37 CFR 1.121(d), or amendment to the specification to add the reference character(s) in the description in compliance with 37 CFR 1.121(b) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance. Specification The disclosure is objected to because of the following informalities: the specification fails to provide reference characters to represent the first attachment part and the second attachment part recited in claim 1. Appropriate correction is required. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 4-6 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Re: claim 4. The phrase “the at least one” is indefinite. The phrase is incomplete making it unclear as to which element Applicant intends to refer to. Re: claim 4. The phrase “cover-like” is indefinite. The “like” addition makes the term unclear as it fails to clearly define the metes and bounds of the claim language. Re: claim 5. The phrase “the part” is indefinite. It is unclear which part Applicant intends to refer to since a variety of parts were previously recited i.e. first attachment part, second attachment part, connector part. The remaining claim is indefinite due to its dependency from claim 5. Allowable Subject Matter Claims 1-3, 7, and 8 are allowed. Claims 4-6 would be allowable if rewritten to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action and to include all of the limitations of the base claim and any intervening claims. Conclusion The prior art made of record and not relied upon is considered pertinent to applicant's disclosure. References US 9435393 to Glen, US 2023/0191864 to Yang et al., DE-102020203171, CN-113357300, and DE-102015118395 teach the use of similar air springs including a rolling lobe and surrounding gaiter. Any inquiry concerning this communication or earlier communications from the examiner should be directed to MELODY M BURCH whose telephone number is (571)272-7114. The examiner can normally be reached Monday - Friday 6:30AM-3PM, generally. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Robert Siconolfi can be reached at 571-272-7124. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. mmb October 17, 2026 /MELODY M BURCH/Primary Examiner, Art Unit 3616
Read full office action

Prosecution Timeline

Dec 13, 2024
Application Filed
Oct 21, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12789596
COMPONENT PROVIDED FOR ENERGY ABSORPTION
5y 2m to grant Granted Nov 10, 2026
Patent 12791080
END-STOP CONTROL VALVES FOR PROVIDING PROGESSIVE DAMPING FORCES IN VIBRATION DAMPERS
3y 11m to grant Granted Nov 10, 2026
Patent 12791074
BUSH
1y 9m to grant Granted Nov 10, 2026
Patent 12781822
NOISE-REDUCING ELEMENT FOR A LEAF SPRING
5y 1m to grant Granted Nov 03, 2026
Patent 12768407
BAND SPRING FOR RETURNING BRAKE PADS ON A CALIPER
3y 3m to grant Granted Oct 20, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
64%
Grant Probability
91%
With Interview (+26.3%)
3y 5m (~1y 6m remaining)
Median Time to Grant
Low
PTA Risk
Based on 1060 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month