DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Objection to Drawings
The drawings are objected to under 37 CFR 1.83(a). The drawings (figs.1-5) must show every feature of the invention specified in the claims. Therefore, (see claim 1) connecting axes of n motors in tandem not shown and referenced, vector control details (see claim 1, steps 2-3) not shown and referenced, inverse closed-loop rotational speed algorithm not shown and referenced, energy consumption balancing algorithm (see claim 1) not shown and referenced, working method of the energy consumption balancing algorithm (see claim 1) including 180 times of iterative training to acquire a basic model weight parameter, PREDICTED DATA, training flow parameter, training cycle not clear (Is it Related to machine learning or neural network as “nodes” mentioned in claim 7 and therefore not clear as to said training data/cycles as there are not related control details shown and referenced), V represents an adjustment cycle, comparing change rules of the load and the energy consumption in two adjacent cycles (see claim 1) not shown and referenced for proper understanding of the invention. These method steps (and related vector control details, PID algorithm, see spec., pages 2-7, para’s [0006] thru [0040]) and how the vector control related to matrix calculation, data training cycles (see claim 1), mathematical model of the motor, back electromotive force, (see (para. [0020], and claim 5 details), anomaly detection algorithm, equity selection algorithm, hybrid feedback algorithm, based on FOC and MPPT, contracting brake/braking details (see claim 3), required voltage space vector (claim 4 details), current control and PWM control/PWM carrier details (see claim 6), working method of the equity selection algorithm and nodes, CALCULATING FAULT ANSWERS mentioned (see claim 7 details) must be shown for clarity and proper understanding of the invention as described in the specification. These method steps and related control details mentioned in claims 1-7 must be shown or the feature(s) canceled from the claim(s). No new matter should be entered.
Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
The drawings are objected to under 37 CFR 1.83(a) because they fail to show vector control details (see claim 1, steps 2-3) not shown and referenced, inverse closed-loop rotational speed algorithm not shown and referenced, energy consumption balancing algorithm (see claim 1) not shown and referenced, working method of the energy consumption balancing algorithm (see claim 1) including 180 times of iterative training to acquire a basic model weight parameter, PREDICTED DATA, training flow parameter, training cycle not clear (Is it Related to machine learning or neural network as “nodes” mentioned in claim 7 and therefore not clear as to said training data/cycles as there are not related control details shown and referenced), V represents an adjustment cycle, comparing change rules of the load and the energy consumption in two adjacent cycles (see claim 1) not shown and referenced for proper understanding of the invention. These method steps (and related vector control details, PID algorithm, see spec., pages 2-7, para’s [0006] thru [0040]) and how the vector control related to matrix calculation, data training cycles (see claim 1), mathematical model of the motor, back electromotive force, (see (para. [0020], and claim 5 details), anomaly detection algorithm, equity selection algorithm, hybrid feedback algorithm, based on FOC and MPPT, contracting brake/braking details (see claim 3), required voltage space vector (claim 4 details), current control and PWM control/PWM carrier details (see claim 6), working method of the equity selection algorithm and nodes, CALCULATING FAULT ANSWERS mentioned (see claim 7) details must be shown and referenced for clarity and proper understanding of the invention as described in the specification. Any structural detail that is essential for a proper understanding of the disclosed invention should be shown in the drawing. MPEP § 608.02(d). Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Objection to Specification
The disclosure is objected to because of the following informalities: they fail to show and reference connecting axes of n motors in tandem not shown and referenced, vector control details (see claim 1, steps 2-3) not shown and referenced, inverse closed-loop rotational speed algorithm not shown and referenced, energy consumption balancing algorithm (see claim 1) not shown and referenced, working method of the energy consumption balancing algorithm (see claim 1) including 180 times of iterative training to acquire a basic model weight parameter, PREDICTED DATA, training flow parameter, training cycle not clear (Is it Related to machine learning or neural network as “nodes” mentioned in claim 7 and therefore not clear as to said training data/cycles as there are not related control details shown and referenced), V represents an adjustment cycle, comparing change rules of the load and the energy consumption in two adjacent cycles (see claim 1) not shown and referenced for proper understanding of the invention. These method steps (and related vector control details, PID algorithm, see spec., pages 2-7, para’s [0006] thru [0040]) and how the vector control related to matrix calculation, data training cycles (see claim 1), mathematical model of the motor, back electromotive force, (see (para. [0020], and claim 5), anomaly detection algorithm, equity selection algorithm, hybrid feedback algorithm, based on FOC and MPPT, contracting brake/braking details (see claim 3), required voltage space vector (claim 4 details), current control and PWM control/PWM carrier details (see claim 6), working method of the equity selection algorithm and nodes, CALCULATING FAULT ANSWERS mentioned (see claim 7) details must be shown and referenced for clarity and proper understanding of the invention as described in the specification.
Appropriate correction is required (including referencing for every control details and said algorithm for claims 1-7 mentioned above) wherever necessary in the specification.
Claim Rejections-35 USC § 112
4. The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 1-7 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the enablement requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to enable one skilled in the art to which it pertains, or with which it is most nearly connected, to make and/or use the invention because connecting axes of n motors in tandem not shown and referenced, vector control details (see claim 1, steps 2-3) not shown and referenced, inverse closed-loop rotational speed algorithm not shown and referenced, energy consumption balancing algorithm (see claim 1) not shown and referenced, working method of the energy consumption balancing algorithm (see claim 1) including 180 times of iterative training to acquire a basic model weight parameter, PREDICTED DATA, training flow parameter, training cycle not clear (Is it Related to machine learning or neural network as “nodes” mentioned in claim 7 and therefore not clear as to said training data/cycles as there are not related control details shown and referenced), V represents an adjustment cycle, comparing change rules of the load and the energy consumption in two adjacent cycles (see claim 1) not shown and referenced for proper understanding of the invention. These method steps (and related vector control details, PID algorithm, see spec., pages 2-7, para’s [0006] thru [0040]) and how the vector control related to matrix calculation, data training cycles (see claim 1), mathematical model of the motor, back electromotive force, (see (para. [0020], and claim 5 details), anomaly detection algorithm, equity selection algorithm, hybrid feedback algorithm, based on FOC and MPPT, contracting brake/braking details (see claim 3), required voltage space vector (claim 4 details), current control and PWM control/PWM carrier details (see claim 6), working method of the equity selection algorithm and nodes, CALCULATING FAULT ANSWERS mentioned (see claim 7) details must be shown and referened for clarity and proper understanding of the invention as described in the specification.
6. The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1-7 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
The claimed subject-matter of claims 1-7 are not clear because connecting axes of n motors in tandem not shown and referenced (see claim 1), rotary transformer to acquire the parameters of the motor not clear as the rotary transformer not shown and referenced connecting the said motors (see claim 1), what is rotary transformer meaning not clear (is it resolver?), vector control details (see claim 1, steps 2-3) not shown and referenced, inverse closed-loop rotational speed algorithm not shown and referenced, energy consumption balancing algorithm (see claim 1) not shown and referenced, working method of the energy consumption balancing algorithm (see claim 1) including 180 times of iterative training to acquire a basic model weight parameter, PREDICTED DATA, training flow parameter, training cycle not clear (Is it Related to machine learning or neural network as “nodes” mentioned in claim 7 and therefore not clear as to said training data/cycles as there are not related control details shown and referenced), V represents an adjustment cycle, comparing change rules of the load and the energy consumption in two adjacent cycles (see claim 1) not shown and referenced for proper understanding of the invention. These method steps (and related vector control details, PID algorithm, see spec., pages 2-7, para’s [0006] thru [0040]) and how the vector control related to matrix calculation, data training cycles (see claim 1), mathematical model of the motor, back electromotive force, (see (para. [0020], and claim 5 details), anomaly detection algorithm, equity selection algorithm, hybrid feedback algorithm, based on FOC and MPPT, contracting brake/braking details (see claim 3), required voltage space vector (claim 4 details), current control and PWM control/PWM carrier details (see claim 6), working method of the equity selection algorithm and nodes, CALCULATING FAULT ANSWERS mentioned (see claim 7) details must be shown and referenced for clarity and proper understanding of the invention as described in the specification.
Allowable Subject-Matter
The following is a statement of reasons for the indication of allowable subject matter: As to claim 1, (Closest prior art, Lapota (US 5,625,262) teaches (figs.1-3, (col.1, lines 4-35), (col.3, lines 66-67), (col.4, lines 1-67)) a control method (via figs.1-3, (col.1, lines 4-35)) of series connected motors 64, 66 (for a hoist 60, see figs.1, 2, 3), comprising the following steps:
step 1: connecting axes [74, 70, 72, 75] of n motors [64, 66] in series, and collecting basic parameters [currents via current sensor 140, current sensor 130, position and speed via encoders 98, 102 of each motor 64, 66, wherein a encoder 98/105 is utilized to acquire the basic parameters [position, speed] of each motor 64, 66, and the said basic parameters comprise an angular displacement [position], an angular velocity, a rotational speed (via encoders 98, 102) and a phase current (via current sensor 130/140) of a rotating shaft 70/68 (see (col.5, lines 1-67) and (col.6, lines 1-50) & (col.7, lines 1-30);
step 4: realizing rotational speed synchronization and load balancing of the motors 64, 66 with the axes [74, 70, , 72, 75] (figs. 2, 3) of motors [64, 66] in series, wherein a synchronization and balancing module [control means 129/139] (Lapota teaches “equalization of the load of a plurality of motors”, see (col.1, lines 4-10), “rotate at the same speed”, see (col. 2, lines 28-37), “match the speed of the first motor and the second motor”, see (col.3, lines 17-21) & (col.7, lines 31-58)) is utilized to realize the rotational speed synchronization and the load balancing of the motors 64, 66 with the axes [74, 70, , 72, 75] connected in series;
As to claim 1, Lapota does not mention step 2: synthesizing a voltage space vector reference value from the acquired basic parameters of each motor, wherein a calculation module is utilized to calculate the voltage space vector reference value; step 3: obtaining an expected voltage output vector based on a hybrid control algorithm and the voltage space vector reference value, wherein an inverse transformation module is utilized to acquire the expected voltage output vector;
As to claim 1, Saha et al. (Pub.No.: US 2012/0249024 A1) teaches synthesizing a voltage space vector reference value Vdo/Vqo (fig.2, para’s [0048], [0058]) from the acquired basic parameters Mt, TM, Vdc, CURRENT, Ir1, Ir2, ϴ, speed ω, (fig.2) of each motor [MG1, MG2] (figs.1-2), wherein a calculation module 7 (fig.2) is utilized to calculate the voltage space vector reference value Vdo/Vq0; step 3: obtaining an expected voltage output vector Vu-Vw based on a hybrid control algorithm (control device controlling dual motors MG1-MG2, see figs.1-2) and the voltage space vector reference value Vd0/Vqo, wherein an inverse transformation module [2 phase to 3 phase module 17] is utilized to acquire the expected voltage output vector Vu-Vw;
However, Lapota and Saha et al. does not mention the energy-saving load unit keeps a load and an energy consumption of the motors with the axes connected in tandem balanced according to the basic parameters of each motor by an energy consumption balancing algorithm, and an output terminal of the rotational speed synchronization unit is connected to an input terminal of the energy-saving load unit; and
Lapota and Saha et al. also does not mention
PNG
media_image1.png
682
694
media_image1.png
Greyscale
PNG
media_image2.png
862
694
media_image2.png
Greyscale
However, in order to determine allowability of claims 1-7, formal requirements outstanding (Objection to drawings and specification, 35 USC § 112 rejection of claims 1-7 must be corrected and clarified in response to this office action for proper understanding of the invention.
Conclusion
Any inquiry concerning this communication or earlier communications from the examiner should be directed to ANTONY M PAUL whose telephone number is (571)270-1608. The examiner can normally be reached M-F 8 am to 4 pm.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Mr. Eduardo Colon Santana can be reached at 571-272-2060. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/ANTONY M PAUL/
Primary Examiner of Art Unit 2837 10/21/2026