DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
________________________________________
Information Disclosure Statement
The information disclosure statements filed April 2, 2025 and May 20, 2025 have been considered.
________________________________________
Claim Objections
Claim 8 is objected to because "series-parallel mode" is inconsistent with the open-clutch "series-hybrid mode" expressly defined later in the same claim, and "the hybrid vehicle i" contains a stray character. Appropriate correction is required under 37 CFR 1.75 and MPEP 608.01(m).
Suggested Correction: Change the two occurrences of "series-parallel mode" to "series-hybrid mode" and delete the final stray "i" after "hybrid vehicle".
Claim 10 is objected to because "predicative adaptive control" is an apparent typographical error in a claim otherwise directed to predictive control. Appropriate correction is required under MPEP 608.01(m).
Suggested Correction: Change "predicative adaptive control" to "predictive adaptive control".
Claim 13 is objected to because the articles in "a intelligent mode switching" and "a adaptive control procedure" are grammatically incorrect. Appropriate correction is required under MPEP 608.01(m).
Suggested Correction: Change those phrases to "an intelligent mode switching" and "an adaptive control procedure", respectively.
________________________________________
Claim Interpretation
The iSS and iPS procedures are construed as the disclosed positive-speed, positive-torque high state and positive-speed, negative-torque low state with pulse duty control and compensating battery power, as described in paragraphs [0091]-[0098]. In claims 11 and 12, PACC denotes the predictive longitudinal driving function expressly permitted by paragraph [00129]; the term alone does not incorporate every separately described iSS, iPS or iMS procedure. Claims 13, 15 and 16 require at least one of their listed alternatives; their safe-following alternative does not incorporate independent claim 9.
In claim 9, each of the three duty/braking steps is expressly contingent on the relative speed with the preceding vehicle being greater than zero. The method can be performed with nonpositive closing speed, in which case those conditional steps need not occur. The continuously calculated road-load and safe-distance trajectories and the three dynamically determined, ordered thresholds remain required. This interpretation follows MPEP 2111.04, subsection II, and Ex parte Schulhauser, Appeal 2013-007847. It does not remove configured structure from an apparatus claim.
________________________________________
References Used
Reference 1 (Primary) - US 12539861 B2.
Reference 2 (Primary) - CN 108973979 A.
Reference 3 (Primary) - 18/998,410.
Reference 4 (Primary) - 19/435,165.
Reference 5 (Primary) - US 2015/0307099 A1.
Reference 6 (Primary) - US 12291188 B2.
________________________________________
Double Patenting
The nonstatutory double patenting rejection is based on a judicially created doctrine grounded in public policy (a policy reflected in the statute) so as to prevent the unjustified or improper timewise extension of the “right to exclude” granted by a patent and to prevent possible harassment by multiple assignees. A nonstatutory double patenting rejection is appropriate where the conflicting claims are not identical, but at least one examined application claim is not patentably distinct from the reference claim(s) because the examined application claim is either anticipated by, or would have been obvious over, the reference claim(s). See, e.g., In re Berg, 140 F.3d 1428, 46 USPQ2d 1226 (Fed. Cir. 1998); In re Goodman, 11 F.3d 1046, 29 USPQ2d 2010 (Fed. Cir. 1993); In re Longi, 759 F.2d 887, 225 USPQ 645 (Fed. Cir. 1985); In re Van Ornum, 686 F.2d 937, 214 USPQ 761 (CCPA 1982); In re Vogel, 422 F.2d 438, 164 USPQ 619 (CCPA 1970); In re Thorington, 418 F.2d 528, 163 USPQ 644 (CCPA 1969).
A timely filed terminal disclaimer in compliance with 37 CFR 1.321(c) or 1.321(d) may be used to overcome an actual or provisional rejection based on nonstatutory double patenting provided the reference application or patent either is shown to be commonly owned with the examined application, or claims an invention made as a result of activities undertaken within the scope of a joint research agreement. See MPEP § 717.02 for applications subject to examination under the first inventor to file provisions of the AIA as explained in MPEP § 2159. See MPEP § 2146 et seq. for applications not subject to examination under the first inventor to file provisions of the AIA . A terminal disclaimer must be signed in compliance with 37 CFR 1.321(b).
The filing of a terminal disclaimer by itself is not a complete reply to a nonstatutory double patenting (NSDP) rejection. A complete reply requires that the terminal disclaimer be accompanied by a reply requesting reconsideration of the prior Office action. Even where the NSDP rejection is provisional the reply must be complete. See MPEP § 804, subsection I.B.1. For a reply to a non-final Office action, see 37 CFR 1.111(a). For a reply to final Office action, see 37 CFR 1.113(c). A request for reconsideration while not provided for in 37 CFR 1.113(c) may be filed after final for consideration. See MPEP §§ 706.07(e) and 714.13.
The USPTO Internet website contains terminal disclaimer forms which may be used. Please visit www.uspto.gov/patent/patents-forms. The actual filing date of the application in which the form is filed determines what form (e.g., PTO/SB/25, PTO/SB/26, PTO/AIA /25, or PTO/AIA /26) should be used. A web-based eTerminal Disclaimer may be filled out completely online using web-screens. An eTerminal Disclaimer that meets all requirements is auto-processed and approved immediately upon submission. For more information about eTerminal Disclaimers, refer to www.uspto.gov/patents/apply/applying-online/eterminal-disclaimer.
Claim 1 is rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-3, 5-7 and 14 of U.S. Patent No. 12,539,861 (Reference 1).
Although the claims at issue are not identical, they are not patentably distinct from each other because the claimed first and second modulation operations of Reference 1, implemented in its series operating state, perform the recited iSS method. Reference 1 claims a drive motor, an engine bidirectionally connected to a generator, a battery pack and a controller that switches the engine between positive-speed combustion with positive torque and positive-speed noncombustion with negative torque. Claim 2 supplies the open-clutch series connection; claim 7 supplies bidirectional generator, battery and motor power paths. Claim 3 expressly defines the high-state time divided by the control period, and claims 5-6 define the selected power amplitude at fixed speed when the clutch is open. The claimed first/second modulation is supported by the iSS embodiment at columns 37-40 and Figure 4: engine 101 at fixed efficient high and fuel-off motored low points, generator 110, driving motor 140 through transmission 150, battery packs 130a/130b, and vehicle controller 201 calculating the road-load-minus-engine difference from configuration, operating and driver inputs under the vehicle dynamics and power balance equations. Rectangular PWM follows the two fixed points; battery compensation follows the difference in real time at subsecond intervals. It would have been obvious to select this disclosed fixed-point implementation of the claimed modulation, because it maintains efficient engine operation while the battery supplies rapid road-load changes. Carrying out the operation of the claimed configured controller yields the recited method without a different control principle. The supporting embodiment construes the claimed modulation under MPEP 804, subsection II.B.1; no unrelated disclosure is treated as prior art.
Claim 2 is rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-3, 5-7 and 14 of U.S. Patent No. 12,539,861 (Reference 1).
Although the claims at issue are not identical, they are not patentably distinct from each other because claim 2 incorporates the iSS operation addressed for claim 1 and specifies operating values for that same claimed modulation. The independently selected duty ratio of reference claim 3 regulates the average between the high and low powers. Columns 39-40 describe its subminute period and rolling average; columns 21 and 46 describe the two-state engine operating stably for over 99% of the time and switching for less than 1%. Selecting that disclosed rapid-transition implementation satisfies at least 95% stable and less than 5% transition operation. The reason for the selection is to spend the control period at the efficient high or fuel-off low point while retaining rapid battery compensation, rather than dissipating it in inefficient engine transitions. No different duty-control function results.
Claim 3 is rejected on the ground of nonstatutory obviousness-type double patenting as being unpatentable over claims 1-3, 5-7 and 14 of U.S. Patent No. 12,539,861 (Reference 1) in view of Reference 2.
The claim 1 comparison is incorporated. Reference 1 expressly claims a hybrid heavy truck but does not limit its engine displacement to 7-16 liters. Reference 2 describes a long-haul hybrid heavy truck with engine 101 having a displacement of 6-8 liters and power of 170-280 kW, explaining the tradeoff between adequate output and fuel efficiency (paragraph [0075]). It would have been obvious to select a 7-8 liter engine within that disclosed range for the heavy-truck control of Reference 1 to provide the freight power with the stated efficient engine size. That overlapping range meets the claimed 7-16 liter interval and retains every iSS control operation mapped for claim 1.
Claim 4 is rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-3, 5-7 and 14 of U.S. Patent No. 12,539,861 (Reference 1).
Although the claims at issue are not identical, they are not patentably distinct from each other because the closed-clutch branch of the claimed first and second modulation performs the recited iPS operation. Claim 2 establishes the direct engine-to-drive-motor mechanical connection when clutch 111 is closed; the driving motor 140 and engine 101 act through transmission 150, with bidirectional battery power through the electric power divider of claim 7. Claims 1 and 14 supply the positive-speed positive/negative torque states and battery modulation based on road load and engine modulation; claim 3 supplies the high-state-time duty ratio, and claims 5-6 select amplitude on a predefined fuel-consumption curve when the clutch is closed. The supporting iPS embodiment at columns 43-44 and Figure 4 uses predefined, single-valued positive high and negative low torque-speed lines. Their changing speeds produce nonrectangular bipolar power pulses; vehicle controller 201 independently varies the duty ratio and directs battery power to follow road load minus the engine waveform using configuration, operating, driver and dynamics inputs. It would have been obvious to select those disclosed efficient lines for the claimed closed-clutch amplitude modulation, because they retain efficient engine torque at the speed imposed by the drivetrain while the battery supplies the transient difference. Execution as a method does not add a distinct control operation to the claimed configured vehicle and reference claim 14.
Claim 5 is rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-3, 5-7 and 14 of U.S. Patent No. 12,539,861 (Reference 1).
Although the claims at issue are not identical, they are not patentably distinct from each other because claim 5 incorporates the iPS operation addressed for claim 4 and selects the same disclosed efficient timing implementation of the claimed two-state modulation. Claim 3 defines the duty ratio; columns 43-44 describe its subminute period and rolling-average adjustment between high and low powers. Columns 21 and 46 describe over 99% stable-state operation and less than 1% transitions. Selecting that implementation meets the claimed at least 95% stable and less than 5% transition operation for the reason stated for claim 2: minimizing inefficient transition time while retaining real-time battery compensation.
Claim 7 is rejected on the ground of nonstatutory obviousness-type double patenting as being unpatentable over claims 1-3, 5-7 and 14 of U.S. Patent No. 12,539,861 (Reference 1) in view of Reference 2.
The claim 4 comparison is incorporated. Reference 1 claims the heavy-truck platform but not the 7-16 liter interval. Reference 2, paragraph [0075], supplies its 6-8 liter engine 101 for heavy long-haul service. Selecting the overlapping 7-8 liter engine for the parallel-hybrid pulse-controlled truck predictably provides the stated freight output and fuel-efficiency balance, for the same sizing reason explained for claim 3, without changing the inherited iPS method.
Claim 6 is provisionally rejected on the ground of nonstatutory double patenting as being unpatentable over claims 10 and 11 of copending Application No. 18/998,410 (reference application) (Reference 3).
Although the claims at issue are not identical, they are not patentably distinct from each other because the CGS branch expressly keeps the clutch closed, commands the engine to its low state before the transmission shift, selects the traction motor alone as one of three expressly listed synchronization options, interrupts torque and synchronizes speed between the engine flywheel and transmission input, and permits the engine to return to its high state after the shift. The inherited fast iPS loop is the positive/negative torque-speed-line pulse control with battery difference tracking. Its fuel-map and waveform embodiments construe that named iPS operation. Selecting the listed traction-motor-only option performs exactly the added steps of claim 6 and avoids operating a second electric machine during synchronization; all inherited claim 4 control operations remain present.
This is a provisional nonstatutory double patenting rejection because the patentably indistinct claims have not in fact been patented.
Claim 6 is provisionally rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1 and 2 of copending Application No. 19/435,165 (reference application) (Reference 4).
Although the claims at issue are not identical, they are not patentably distinct from each other because the CGS branch expressly keeps the clutch closed, commands the engine to its low state before the transmission shift, selects the traction motor alone as one of three expressly listed synchronization options, interrupts torque and synchronizes speed between the engine flywheel and transmission input, and permits the engine to return to its high state after the shift. The inherited fast iPS loop is the positive/negative torque-speed-line pulse control with battery difference tracking. Its fuel-map and waveform embodiments construe that named iPS operation. Selecting the listed traction-motor-only option performs exactly the added steps of claim 6 and avoids operating a second electric machine during synchronization; all inherited claim 4 control operations remain present.
This is a provisional nonstatutory double patenting rejection because the patentably indistinct claims have not in fact been patented.
Claim 8 is provisionally rejected on the ground of nonstatutory double patenting as being unpatentable over claims 10 and 11 of copending Application No. 18/998,410 (reference application) (Reference 3).
Although the claims at issue are not identical, they are not patentably distinct from each other because the iMS branch continuously calculates instantaneous and rolling-average road-load functions from vehicle parameters, operating data, predicted cruising speed and vehicle dynamics within the electronic horizon, and selects open-clutch series iSS below an absolute average-load threshold or closed-clutch parallel iPS above it. The electronic-horizon implementation uses the 3D road profile and map inputs shown in Figures 3 and 5 of Reference 3. The compared claims expressly switch between these modes with the generator connected to the engine and the traction motor connected to the transmission. Claim 8 assigns equality to the series mode whereas the reference claims use a strict less-than comparison. Assigning the threshold endpoint to the series state is an obvious, predictable allocation between the same two commanded states; it adds no third operating mode and permits consistent selection at the calibrated threshold.
This is a provisional nonstatutory double patenting rejection because the patentably indistinct claims have not in fact been patented.
Claim 8 is provisionally rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1 and 2 of copending Application No. 19/435,165 (reference application) (Reference 4).
Although the claims at issue are not identical, they are not patentably distinct from each other because the iMS branch continuously calculates instantaneous and rolling-average road-load functions from vehicle parameters, operating data, predicted cruising speed and vehicle dynamics within the electronic horizon, and selects open-clutch series iSS below an absolute average-load threshold or closed-clutch parallel iPS above it. The electronic-horizon implementation uses the 3D road profile and map inputs shown in Figures 1 and 5 of Reference 4. The compared claims expressly switch between these modes with the generator connected to the engine and the traction motor connected to the transmission. Claim 8 assigns equality to the series mode whereas the reference claims use a strict less-than comparison. Assigning the threshold endpoint to the series state is an obvious, predictable allocation between the same two commanded states; it adds no third operating mode and permits consistent selection at the calibrated threshold.
This is a provisional nonstatutory double patenting rejection because the patentably indistinct claims have not in fact been patented.
Claim 10 is provisionally rejected on the ground of nonstatutory double patenting as being unpatentable over claims 10 and 11 of copending Application No. 18/998,410 (reference application) (Reference 3).
Although the claims at issue are not identical, they are not patentably distinct from each other because the PSC slow loop predicts the difference between road-load average power and engine average power within the electronic horizon, independently adjusts engine PWM duty to shape the difference, and commands battery charge or discharge to follow it. The claimed hybrid includes engine, generator, traction motor, clutch, transmission, battery and vehicle controller with iSS or iPS. The supporting electronic-horizon embodiment uses prior 3D road data, predicted vehicle speed, configuration and operating inputs with the dynamics equation. The compared claims expressly define charge sustaining when the absolute average difference is below a positive threshold, charge depletion when positive above a threshold, and charge increasing when negative below a threshold, with dynamic switching and independent fast and slow loops. Claim 10 permits the broader sustained intervals and includes equality at the charge-sustaining boundary; allocating that endpoint to the same near-zero charge-sustaining region is a predictable threshold choice. The additional learning or near-zero-average restrictions of the reference claims do not impart a different operation to the broader present method.
This is a provisional nonstatutory double patenting rejection because the patentably indistinct claims have not in fact been patented.
Claim 10 is provisionally rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1 and 2 of copending Application No. 19/435,165 (reference application) (Reference 4).
Although the claims at issue are not identical, they are not patentably distinct from each other because the PSC slow loop predicts the difference between road-load average power and engine average power within the electronic horizon, independently adjusts engine PWM duty to shape the difference, and commands battery charge or discharge to follow it. The claimed hybrid includes engine, generator, traction motor, clutch, transmission, battery and vehicle controller with iSS or iPS. The supporting electronic-horizon embodiment uses prior 3D road data, predicted vehicle speed, configuration and operating inputs with the dynamics equation. The compared claims expressly define charge sustaining when the absolute average difference is below a positive threshold, charge depletion when positive above a threshold, and charge increasing when negative below a threshold, with dynamic switching and independent fast and slow loops. Claim 10 permits the broader sustained intervals and includes equality at the charge-sustaining boundary; allocating that endpoint to the same near-zero charge-sustaining region is a predictable threshold choice. The additional learning or near-zero-average restrictions of the reference claims do not impart a different operation to the broader present method.
This is a provisional nonstatutory double patenting rejection because the patentably indistinct claims have not in fact been patented.
Claim 9 is rejected on the ground of nonstatutory obviousness-type double patenting as being unpatentable over claims 1-7 and 14 of U.S. Patent No. 12,539,861 (Reference 1) in view of Reference 2 and Reference 5.
The iSS and iPS comparisons for claims 1 and 4 establish the underlying pulse-control steps, including controller 201, the engine, generator, motor, transmission and compensating battery power. The conflicting claims do not themselves require the safe-distance trajectory or the three ordered distance thresholds. Reference 2 continuously predicts road-load power and safe distance from the vehicle configuration and operating data, GNSS 220, map unit 240, radar 230, 3D road grade, predicted speed and vehicle dynamics (paragraphs [0093]-[0107] and [0110]-[0112]). Reference 5 supplies the graduated following-distance structure: d_target, d_driver and the smaller emergency safety gap d_safety in Figure 3, with adaptation to vehicle speed, mass, road slope and available regenerative deceleration (paragraphs [0068]-[0069] and [0084]-[0105]). It would have been obvious to use the horizon-based distance calculation of Reference 2 and these ordered distance margins with the claimed pulse-controlled hybrid, because they permit advance power reduction and economical deceleration while preserving a separate emergency separation margin. Continuously updating the distance thresholds from the changing speed, slope and available deceleration gives the predictable staged safe-following calculation. Under the stated construction of claim 9, the method also covers following with nonpositive relative closing speed. In that circumstance the unconditional road-load, safe-distance and three-threshold calculations are performed, but the three conditional duty/braking branches are not required. Accordingly, the less-than-50%, zero-duty and zero-duty-plus-braking branches do not distinguish that covered method. This ground does not assert that References 2 or 5 disclose that specific pulse-percentage sequence when closing speed is positive.
Claim 11 is rejected on the ground of nonstatutory obviousness-type double patenting as being unpatentable over claims 6-8 of U.S. Patent No. 12,291,188 (Reference 6) in view of Reference 2.
Claim 6 of Reference 6 defines the hybrid vehicle, vehicle control unit, AI unit, and comparator that forms a weighted composite of environmental, advanced automated and human control signals. Claim 8 defines the absolute-difference threshold between automated and manual signals and the pre- and post-event environmental and control information. Claim 7 supplies the unique GNSS-based time annotation for the environmental and vehicle operating data. Combining the time annotation of claim 7 with the event information of claim 8 in the same claim 6 vehicle would have been obvious to identify each event uniquely and synchronize its contributing data. The supporting comparison embodiment at Figure 3 and columns 119-123 implements these claimed functions with comparator 203, VCU 201, AIU 202, real-time longitudinal/lateral signals, L2 shadow weights, and locally stored clock-identified discrepancy reports. Performing those configured functions as method steps does not add a distinct comparison or recording operation. Reference 6's conflicting claims do not expressly require the independently operating PACC function. Reference 2 provides that predictive longitudinal function through VCU 201, prior 3D road information and safe-distance control, with efficient steady engine power and battery compensation for changing road demand (paragraphs [0082]-[0084] and [0093]-[0112]). It would have been obvious to retain that predictive cruise function independently while the claimed comparator records shadow-mode discrepancies, because the advanced system can be validated without disturbing efficient, established longitudinal control. The report operation and predictive cruise operation then remain independent as claimed. Optional cloud transmission is also described by reference claim 10; it is not required by the present claim.
Claim 12 is rejected on the ground of nonstatutory obviousness-type double patenting as being unpatentable over claims 6-8 of U.S. Patent No. 12,291,188 (Reference 6) in view of Reference 2.
The claimed hybrid, manual/automated signal comparison, absolute-difference threshold, unique clock annotation and pre/post environmental and operating data are established by the same conflicting claims discussed for claim 11. Claim 12 selects reduced L3 conditional automated operation and a disengagement report. The weighted composite signal of reference claim 6 is implemented with the AI-primary/human-fallback L3 weights at columns 120-123; comparator 203 and VCU 201 create the locally stored clock-identified disengagement record when the threshold event occurs, using the raw road and vehicle information before and after that event. Selecting this disclosed L3 operating implementation of the claimed weighted comparator would have been obvious to validate the advanced controller while preserving human fallback. Combining the time-annotated information of reference claim 7 with the event information of claim 8 identifies and synchronizes the event for the reason given for claim 11. Reference 2 supplies the independent predictive longitudinal cruise function, including efficient engine operation and battery compensation, for the same reason given for claim 11: maintaining the established efficient driving function during control-system validation. Optional external transmission of the event information is additionally addressed in reference claim 10.
The reference patents and applications share common inventorship with this application. The reference claims are construed using only supporting embodiments of their claimed control and comparison functions. These rejections do not treat the later reference disclosures as prior art or rest merely on a broader claim encompassing a narrower claim. The one-way patentable-distinctness analysis applies under MPEP 804 and Ex parte Baurin, Appeal 2024-002920 (Appeals Review Panel, designated precedential August 6, 2026).
________________________________________
Claim Rejections - 35 U.S.C. 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of pre-AIA 35 U.S.C. 112, second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claim 15 is rejected under 35 U.S.C. 112(b) as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor regards as the invention.
Claim 15 recites "An internal combustion engine" and "wherein the engine is configured to perform at least one of the following methods", followed by seven vehicle-control or report-generating procedures. It is unclear whether the claimed engine includes the separate control and comparison hardware needed to perform a complete selected procedure, or whether the engine merely receives commands while another apparatus performs the procedure. Paragraphs [00166]-[00167] distinguish engine 101 and engine control unit 102 from vehicle control unit 201; paragraph [00129] assigns predictive vehicle control to the vehicle controller, and paragraphs [00259]-[00270] assign comparison and report functions to comparator 203 and the vehicle controller. These materially different apparatus boundaries are not resolved by the claim. The scope cannot be determined merely by treating the engine as the whole vehicle or silently substituting the vehicle controller for the engine.
Suggested Correction: Expressly identify the claimed engine and the controller that performs the selected procedure, and state their operative relationship; alternatively, identify the particular engine-specific acts that the engine is configured to perform. The selected amendment must be supported by the original disclosure.
The engine/control-system boundary affects the entire claimed article and its alternative functions. A prior-art rejection of claim 15 is not made on speculative assumptions about that boundary (MPEP 2173.06, subsection II). This is not an indication of allowable subject matter.
________________________________________
Claim Rejections - 35 U.S.C. 102
The following is a quotation of the appropriate paragraphs of 35 U.S.C. 102 that form the basis for the rejections under this section made in this Office action:
A person shall be entitled to a patent unless—
(a)(1) the claimed invention was patented, described in a printed publication, or in public use, on sale, or otherwise available to the public before the effective filing date of the claimed invention.
Claim 13 is rejected under 35 U.S.C. 102(a)(1) as being anticipated by Reference 5.
Claim Text
(L1) A hybrid vehicle, comprising: an engine, a driving motor, a clutch, a transmission, a battery pack and a vehicle controller, (L2) wherein the vehicle controller is configured to perform at least one of: - a series-hybrid intelligent start-stop (iSS) control procedure; - a parallel-hybrid intelligent power switching (iPS) control procedure; - a intelligent mode switching (iMS) control procedure; - a adaptive control procedure for safe following distance of a hybrid vehicle; - a predictive control procedure for hybrid vehicle battery pack average state of charge (SoC); - a procedure for generating a discrepancy report of a L2 autonomous driving hybrid vehicle; - a procedure for generating a disengagement report of a L3 autonomous driving hybrid vehicle.
Analysis
(L1) Reference 5 describes hybrid vehicle 100 having internal combustion engine 121, crankshaft integrated motor/generator 123, clutch 122, automatic transmission 124, battery 150 and controller 140 (Figure 2; paragraphs [0071]-[0080]). (L2) Controller 140 and ACC system 110A are configured to adjust propulsion and regenerative/friction braking to maintain a safe distance behind a preceding vehicle, using radar sensor 101R and distance thresholds adjusted for vehicle speed and braking conditions (Figures 2-3; paragraphs [0084]-[0105]). This expressly performs the listed "adaptive control procedure for safe following distance of a hybrid vehicle". The claim requires at least one listed procedure; it does not require the other six alternatives as well or incorporate the particular pulse schedule of claim 9.
________________________________________
Claim 16 is rejected under 35 U.S.C. 102(a)(1) as being anticipated by Reference 2.
Claim Text
(L1) A vehicle controller of a hybrid heavy-duty truck suitable for long-haul freight transportation, (L2) wherein the controller is configured to perform at least one of the following methods: - a series-hybrid intelligent start-stop (iSS) control procedure; - a parallel-hybrid intelligent power switching (iPS) control procedure; - an intelligent mode switching (iMS) control procedure for a mixed-hybrid vehicle; - an adaptive control procedure for safe following distance of a hybrid vehicle; - a predictive control procedure for hybrid vehicle battery pack average state of charge (SoC); - a procedure for generating a discrepancy report of a L2 autonomous driving hybrid vehicle; - a method for generating a disengagement report of a L3 autonomous driving hybrid vehicle.
Analysis
(L1) Reference 2 describes vehicle control unit 201, an automotive embedded processor in a hybrid heavy-duty truck for long-haul freight transportation (Figure 1; paragraphs [0071]-[0075] and [0110]-[0112]). (L2) Vehicle control unit 201 receives radar 230, GNSS 220 and map unit 240 information and calculates a safe following distance using road grade, vehicle mass, speed and the vehicle dynamics. When separation falls below the calculated distance, it reduces generator and drive power and then commands regenerative braking as needed (paragraphs [0104]-[0112]; Figures 1, 3 and 4). It is thus actually configured to perform the listed "adaptive control procedure for safe following distance of a hybrid vehicle". One of the seven alternatives is sufficient; the other listed procedures are not additional conjunctive requirements.
________________________________________
Claim Rejections - 35 U.S.C. 103
The following is a quotation of 35 U.S.C. 103 which forms the basis for all obviousness rejections set forth in this Office action:
A patent for a claimed invention may not be obtained, notwithstanding that the claimed invention is not identically disclosed as set forth in section 102, if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains. Patentability shall not be negated by the manner in which the invention was made.
This application currently names joint inventors. In considering patentability of the claims the examiner presumes that the subject matter of the various claims was commonly owned at the time any inventions covered therein were effectively filed absent any evidence to the contrary. Applicant is advised of the obligation under 37 CFR 1.56 to point out the inventor and effective filing dates of each claim that was not commonly owned at the time a later invention was effectively filed in order for the examiner to consider the applicability of 35 U.S.C. 102(b)(2)(C) for any potential 35 U.S.C. 102(a)(2) prior art against the later invention.
Claim 14 is rejected under 35 U.S.C. 103 as being unpatentable over Reference 5 in view of Reference 2.
Claim Text
(L1) The hybrid vehicle of claim 13, (L2) wherein the vehicle is a hybrid heavy-duty truck suitable for long-haul freight transportation, (L3) and the engine displacement is within the range of 7 liters to 16 liters.
Analysis
(L1) The claim 13 analysis is incorporated. Reference 5 supplies all of the inherited hybrid hardware and the selected adaptive-following function. (L2) Reference 5 does not expressly identify the vehicle as a heavy-duty truck suitable for long-haul freight transportation. Reference 2 describes that platform and its predictive safe-following control (paragraphs [0074]-[0075] and [0110]-[0112]). (L3) Reference 5 also does not specify a 7-16 liter engine. Reference 2 specifies engine 101 with a 6-8 liter displacement and 170-280 kW output, explaining the balance of freight power and engine efficiency (paragraph [0075]). Selecting a 7-8 liter engine within the disclosed range satisfies the claimed interval.
Motivation
It would have been obvious to one of ordinary skill in the art, before the effective filing date of the claimed invention, to implement the mass-, grade- and regeneration-aware adaptive cruise control and hybrid drivetrain of Reference 5 in the long-haul heavy-truck platform of Reference 2 using a 7-8 liter engine from its disclosed range, because that platform provides the freight power with the stated engine-efficiency balance while the adaptive control recovers braking energy and maintains separation. Reference 5 already calculates available regenerative deceleration using host vehicle mass, driving-surface slope, charging torque limit and speed (paragraphs [0098]-[0105]), so adjusting those existing vehicle-specific inputs for the heavier truck predictably preserves the safe-following function. Both references concern hybrid vehicle power and cruise control, and the modification retains the inherited engine, motor, clutch, transmission, battery and controller arrangement.
________________________________________
Conclusion
Claims 1-16 are pending. Claims 1-16 are rejected. Claims 8, 10 and 13 are additionally objected to. No claim is allowed or indicated as allowable subject matter.
The prior art made of record and not relied upon is considered pertinent to applicant's disclosure.
________________________________________
Art Considered but Not Applied
US 2018/0162397 A1 describes pulse-and-glide hybrid cruise operation but stops the engine during glide. It does not provide the complete positive-speed negative-torque low state with the claimed bipolar engine-power waveform and real-time compensating battery difference control.
US 2016/0167641 A1 predicts battery state of charge using road and operating information, but does not provide the complete independently selected PWM duty and rolling-average road-load-minus-engine difference that defines the claimed decoupled CS, CD and CI operation.
US 2019/0389482 A1 provides autonomous-driving disengagement records and associated vehicle data, but does not provide a stronger whole-claim basis for the real-time human/automated signal-difference comparator and independent predictive cruise combination of claims 11 and 12.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to JASON C SMITH whose telephone number is (703)756-4641. The examiner can normally be reached Monday - Friday 8:30 AM - 5:00 PM.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Joseph Morano can be reached at (571) 272-6684. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/Jason C Smith/ Primary Examiner, Art Unit 3615