DETAILED ACTION
A preliminary amendment filed concurrently with the application canceling claims 1-3 and presenting new claims 4-6 is acknowledged. Claims 4-6 are examined herein.
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Claim Objections
Claims 4-6 are objected to because of the following informalities:
Claim 4 recites “comprsing” which should be “comprising”.
Claim 4 recites “an optoelectronic sensors” which should either be “sensor” in the singular form, or if plural form is intended, a further issue under 35 U.S.C. 112 may be applicable, thus clarity is required as to if one or more sensors in this limitation are required.
Claim 4 recites “optoelectronic” and “optoelectric” when referring to sensors, where it appears “optoelectric” is a typographical error.
Claim 5 recites “ab SD card”, which appears to be a typographical error and “ab” should be “an”, however, if “ab” is intended, the phrase lacks a recognized meaning.
Claim 6 recites “implemented by 2/2 digital computers” in which “2/2” appears to be a typographical error or inadvertently added from pagination and should be removed.
Appropriate correction is required.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 4-6 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
Claim 4 initially recites “a coupon” and then later recites “the thermal-paper coupon”, “the thermal-coupon paper”, and “paper/coupon”. The latter terms appear to lack antecedent basis, and moreover, the inconsistency throughout the claim results a clarity issue with respect to the claimed device using coupons, paper, thermal-coupons, or thermal-paper, or if each of these recitations is intended to refer to the same item.
Claim 4 recites “a pair of dual-function optoelectronic sensors” followed by a first sensor “for confirmation of the output” of the thermal-coupon paper and a second sensor “for redundancy in protection” against specific access attempts. It is unclear whether each sensor must perform two functions, as indicated by “dual-function”, or whether the pair collectively performs the two recited functions. If each sensor performs two functions, the claim does not identify the other required function of each sensor. The specification describes delivery confirmation and redundant access protection in connection with dual-function sensing, but does not clearly resolve the allocation of these functions between the first and second sensors as presently claimed. Thus, the required capabilities of the claim sensor pair are unclear.
Claim 4 further recites an optoelectronic sensor “for protection against invalid, premature, and/or unauthorized access”. It is unclear whether this limitation requires detection of an access event, generation of a security indication, inhibition of device operation, or coupon release, or physical prevention of access. The specification describes sensor monitoring and responses to security conditions, but the claim does not distinctly identify whether detection alone satisfies the recited “protection” or whether an additional protective response is required.
Claim 4 also recites “concealment of the thermal-paper coupon” and “coupon paper displayed in the portholes” which could be interpreted as contradictory, and while is possible for different parts of the coupon to be visible and concealed, it remains unclear whether the claim requires concealment of the printed information, concealment of the whole coupon, or merely obstruction of some part of the coupon.
Claim 6 recites “the communication with ELGCSs” in which “the communication” appears to lack antecedent basis as no prior recitation in claims 4 or 5 refer to communication with ELGCSs and only “authentication of results”. Moreover, claim 6 recites this communication is made by “a proprietary communication protocol, configured to perform the following functions previously stored in the form of firmware” followed by a number of steps. It is unclear whether the recited functions are required capabilities of the claimed device’s IC microcontroller (recited in claim 5) executing firmware, capabilities of the communication protocol, or functions performed partly by the ELGCS. The specification describes an electronic circuit that performs device-side processing and communicates with the ELGCS, but the claim does not clearly assign the listed functions to that circuit, or another identified components. Thus, the required configuration of the claimed device is unclear.
Claim 6 recites “the sequence diary” which lacks antecedent basis.
Claim 6 recites “the tray” which lacks antecedent basis. It appears the intention is for referring to “the print tray”, nonetheless, as presently claimed, the recitation could be interpreted as referring to a different tray. Moreover, “preservation of the physical integrity of the tray” is unclear whether this requires monitoring a tamper condition, issuing an error or unavailable status, inhibiting operation, physical preventing access, or another operation. The specification provides examples of sensor monitoring and error responses but does not supply a clear meaning for this separate claimed function. Therefore, the scope of this limitation is unclear.
Claim 6 recites “the user” which lacks antecedent basis, as there is no previous reference to a user of the device.
Conclusion
The prior art made of record and not relied upon is considered pertinent to applicant's disclosure. See attached Notice of References Cited (PTO-892).
Any inquiry concerning this communication or earlier communications from the examiner should be directed to MILAP SHAH whose telephone number is (571)272-1723. The examiner can normally be reached Monday - Friday, 9:30-6PM.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, KANG HU can be reached at 571-270-1344. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/MILAP SHAH/Primary Examiner, Art Unit 3715