DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Drawings
The drawings are objected to as failing to comply with 37 CFR 1.84(p)(5) because they include the following reference character(s) not mentioned in the description: “3007”, “3008” in Figure 13; “3492” in Figure 29 Corrected drawing sheets in compliance with 37 CFR 1.121(d), or amendment to the specification to add the reference character(s) in the description in compliance with 37 CFR 1.121(b) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
The drawings are objected to as failing to comply with 37 CFR 1.84(p)(5) because they do not include the following reference sign(s) mentioned in the description: “3493” in paragraph 155. Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Note: It appears that the object labeled as “3492” in Figure 29 corresponds to “the first collection part 3493” in specification paragraph 155. The examiner suggests fixing these objections by correcting the specification.
Claim Objections
Claim 13 is objected to because of the following informalities: Claim 13 recites “a grip part for griping”. It appears that griping is a misspelling of the term “gripping. The examiner suggests amending the claim to recite “a grip part for gripping”. Appropriate correction is required.
Claim Interpretation
The following is a quotation of 35 U.S.C. 112(f):
(f) Element in Claim for a Combination. – An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.
The following is a quotation of pre-AIA 35 U.S.C. 112, sixth paragraph:
An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.
The claims in this application are given their broadest reasonable interpretation using the plain meaning of the claim language in light of the specification as it would be understood by one of ordinary skill in the art. The broadest reasonable interpretation of a claim element (also commonly referred to as a claim limitation) is limited by the description in the specification when 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is invoked.
As explained in MPEP § 2181, subsection I, claim limitations that meet the following three-prong test will be interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph:
(A) the claim limitation uses the term “means” or “step” or a term used as a substitute for “means” that is a generic placeholder (also called a nonce term or a non-structural term having no specific structural meaning) for performing the claimed function;
(B) the term “means” or “step” or the generic placeholder is modified by functional language, typically, but not always linked by the transition word “for” (e.g., “means for”) or another linking word or phrase, such as “configured to” or “so that”; and
(C) the term “means” or “step” or the generic placeholder is not modified by sufficient structure, material, or acts for performing the claimed function.
Use of the word “means” (or “step”) in a claim with functional language creates a rebuttable presumption that the claim limitation is to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites sufficient structure, material, or acts to entirely perform the recited function.
Absence of the word “means” (or “step”) in a claim creates a rebuttable presumption that the claim limitation is not to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is not interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites function without reciting sufficient structure, material or acts to entirely perform the recited function.
Claim limitations in this application that use the word “means” (or “step”) are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action. Conversely, claim limitations in this application that do not use the word “means” (or “step”) are not being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action.
This application includes one or more claim limitations that do not use the word “means,” but are nonetheless being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, because the claim limitation(s) uses a generic placeholder that is coupled with functional language without reciting sufficient structure to perform the recited function and the generic placeholder is not preceded by a structural modifier. Such claim limitation(s) is/are:
Claim 8:
“a separator opening part for opening a separator” in claim 8. The specification discloses and claim 8 recites that the corresponding structure is “a first unfold part which holds and unfolds”, “a primary removal part for separating”, “a primary removal part for separating”, “an inverting part for inverting” and “a second unfold part for holding and unfolding”, all of which are also interpreted under 35 U.S.C. 112(f), as discussed below.
“a main disassembly unit for separating” in claim 8. The specification discloses and claim 15 recites that the corresponding structure includes “a crane part for pulling”, “a separator collection part for winding and collecting”, “a first pressurizing roller for pressurizing”, “a second pressurizing roller for pressurizing”, “a first injection nozzle for injecting air”, and “a second injection nozzle for injecting air”. Of these, the term “a crane part for pulling” and “a separator collection part for winding and collecting” are also interpreted under 35 U.S.C. 112(f), as discussed below, whereas the terms “a first pressurizing roller for pressurizing”, “a second pressurizing roller for pressurizing”, “a first injection nozzle for injecting air”, and “a second injection nozzle for injecting air” are structural terms as the terms roller and nozzle are structures.
“a first unfold part which holds and unfolds” and “a second unfold part for holding and unfolding” in claim 8. The specification discloses and claim 11 appears to recites that the corresponding structure includes “a support stage”, “an unfold module for holding and unfolding”, and “a fixed adsorption part”. Of these, the terms “an unfold module for holding and unfolding”, and “a fixed adsorption part” are also interpreted under 35 U.S.C. 112(f), as discussed below.
“a primary removal part for separating” in claim 8. The specification discloses that the corresponding structure in paragraph 136 is that “The primary removal part suctions the top surface of the cathode plate 34 with a vacuum to separate the negative electrode plate 34 from the electrode assembly 30”. Although the figures do not show the primary removal part, a person of ordinary skill in the art would appreciate that the primary removal part is a vacuum suction and would include a broad class of structures that provide a vacuum suction.
“an inverting part for inverting” in claim 8. The specification discloses in paragraph 120 that “In the first unfold part 3100, an unfolding operation is performed to hold and unfold the first end 32a of the separator 32 surrounding the electrode assembly 30. In the inverting portion 3200, an operation is performed to invert the electrode assembly 30 with the separator 32 open by 180 degrees. The inverting portion 3200 may include an inverting part 3210 (see FIG. 17) that holds opposite ends of the electrode assembly 30 and flips the electrode assembly 30 180 degrees. The inverting part 3210 may hold the opposite ends of the electrode assembly 30 placed on the stage 3220, move to a predetermined height, invert the electrode assembly 30, and then place the inverted electrode assembly 30 back down on the stage 3220. A detailed description of the inverting part 1320 will be omitted.” Additionally, Figure 17 shows a box object with lines as inverting part 3210 with a rotational arrow. Therefore, a person of ordinary skill in the art would appreciate that the structure of the inverting part includes a broad class of structures that hold opposite ends and flips or moves the electrode assembly such as a holder and mover structure.
Claim 11:
“an unfold module for holding and unfolding” in claim 11. The specification discloses and claim 13 recites that the corresponding structure includes “a grip part for griping”, “a vertical drive part for moving” and “horizontal drive part for moving”. The terms “a vertical drive part for moving” and “horizontal drive part for moving” are also interpreted under 35 U.S.C. 112(f), as discussed below.
“a fixed adsorption part… and fixing” in claim 11. The specification discloses in paragraph 133 that the corresponding structure includes as follows: “The fixed adsorption part 3180 is positioned on one side of the support stage 3110 and includes adsorption pads 3182”
Claim 13:
“a vertical drive part for moving” and “horizontal drive part for moving” in claim 13. Paragraph 132 of the specification discloses “The unfold module 3120 may include a grip part 3130 for gripping the separator 32 of the electrode assembly 30, a vertical drive part 3140 for moving the grip part 3130 in a vertical direction, and a horizontal drive part 3150 for moving the vertical drive part 3140 in a Y-axis direction.” The figures show these drive parts in Figure 14, and a person of ordinary skill in the art would appreciate from the figures that each drive part is a broad class of linear drives that move in a linear axis direction (either the horizontal axis or the vertical Y axis)
Claim 15:
“crane part for pulling” in claim 15. The specification discloses in paragraph 144-146 that the corresponding structure includes as follows: “[144] The crane part 3420 is a device for holding and pulling upwardly one end 32b of the separator exposed by the top surface of the electrode assembly 30. The crane part 3420 may include a grip part 3425 and a vertical drive part 3422. The vertical drive part 3422 may include guide rails 3423 symmetrically installed on opposite sides of the frame 3410 and a moving bar 3424 installed to be liftable along the guide rail 3423. The grip part 3425 may be installed on the moving bar 3424. [145] FIGS. 23 and 24 are diagrams for describing the grip part. [146] As illustrated in FIGS. 23 and 24, the grip part 3425 may include adsorption pads 3426 that vacuum adsorb the separator and pincers 3427 that fix the separator. The grip part 3425 has difficulty pulling the separator 32 using only the adsorption force of the adsorption pads 3426, and to compensate for this, the grip part 3425 adds the pincers 3427 for gripping the separator 32.”
“separator collection part for winding and collecting” in claim 15. The specification discloses in paragraph 147 that the corresponding structure includes as follows: “The separator collection part 3430 may include a rotary motor 3432, a rotary plate 3434 rotated by the rotary motor 3432, and a pair of reel rods 3436 spaced apart from each other on the rotary plate 343”
Claim 16:
“wet treatment part for providing… solvent” in claim 16. The specification discloses in paragraph 99-100 that the corresponding structure includes as follows: “[99] The wet treatment part 2000 may wet-treat the electrode assembly 30 in a variety of ways. As illustrated in FIG. 8, the wet treatment part 2000 according to the present embodiment may wet-treat the separator 32 of the electrode assembly 30 by contacting a water-soaked sponge 2100 with the top surface of the electrode assembly 30. The sponge 2100 may be provided in the form of a square pad having a larger area than the electrode assembly 30. However, the shape of the sponge 2100 is not limited to this, and may also be provided in the shape of a roller-shaped sponge. The sponge 2100 may be held in a waiting area and returned to the waiting area by a drive means 2200 after contacting the top surface (separator) of the electrode assembly 30. The waiting place may be provided with a water tank 2300 containing water, and the sponge 2100 may absorb water while waiting. [100] Alternatively, the wet treatment part 2000 may employ a method of injecting an electrode plate removal promoting solvent (water) to the electrode assembly by using a nozzle or a method of immersing the electrode assembly in a bath filled with an electrode plate removal promoting solvent. For reference, excessive water supply to the electrode assembly is undesirable.”
Claim 52:
“a grip part for gripping the separator” in claim 52. The specification discloses in paragraph 146 and recites in dependent claim 53 that the corresponding structure includes as follows: “As illustrated in FIGS. 23 and 24, the grip part 3425 may include adsorption pads 3426 that vacuum adsorb the separator and pincers 3427 that fix the separator.”
“a vertical drive part for vertically moving” in claim 52. The specification discloses in paragraph 144 that the corresponding structure includes as follows: “The vertical drive part 3422 may include guide rails 3423 symmetrically installed on opposite sides of the frame 3410 and a moving bar 3424 installed to be liftable along the guide rail 3423.”
Claim 57
“a prior preparation part for removing” in claim 57. The specification in paragraph 101 discloses that the corresponding structure can include “Referring again to FIGS. 4 and 5, the prior preparation part 1000 includes a discharge check part 1100 for checking whether the battery cells 20 is discharged, an aligning part 1200 for aligning the battery cells prior to cutting the pouch, a cutting part 1300 for cutting the edge of the pouch 40 enclosing the electrode assembly 20, a cover separation part 1400 for separating an upper cover 42 and a lower cover 44 of the pouch 40 with the edges cut, and an idler part 1500 where the battery cells (or electrode assembly) wait for a time.” The claim further recites the terms “a cutting part for cutting” and “a cover separation part for separating”, which are also interpreted under 35 U.S.C. 112(f), as discussed below.
“a cutting part for cutting” in claim 57. The specification in paragraph 108-110 discloses that the corresponding structure includes as follows “[108] FIGS. 9 and 10 are diagrams for describing the cutting part. [109] Referring to FIGS. 4, 9, and 10, the cutting part 1300 may be divided into a side cutting part 1310 and a terrace cutting part 1320. The side cutting part 1310 cuts a left and right edges 47 (referred to as the side) of the pouch 40, and the terrace cutting part 1320 cuts a front and rear edge 48 (referred to as the terrace) of the pouch 40. The side cutting part 1310 and the terrace cutting part 1320 may include circular cutter blades 1302. The cutter blades 1302 cut the edges of the pouch 40 while moving along cutting lines L 1 and L2 of the pouch 40. As another example, the cutting part 1300 may include a laser-activated cutter. [110] FIG. 31 is a diagram illustrating another example of the cutting part, in which the cutter blade may cut the edge of the pouch 40 in a cutting manner using a shearing blade 1308 that is lifted by a drive part 1309.” See also claim 59, which recites “a circular rotary cutter blade”.
“a cover separation part for separating” in claim 57. The specification in paragraph 117-120 discloses that the corresponding structure includes as follows “[117] The cover separation part 1400 may include a first separation part 1410, an inverting part 1420, and a second separation part 1430. [118] The first separation part 1410 removes the upper cover 42 of the pouch 40 from the battery cell 20, and the second separation part 1430 removes the lower cover 44 of the pouch 40 from the battery cell 20. [119] The first separation part 1410 and the second separation part 1430 include a vacuum pad 1402. The upper cover 42 and the lower cover 44 may each be suction-fixed by the vacuum pad 1402 and removed from the battery cell 20. The vacuum pad 1402 may be provided to be moved in an up, down, left and right direction by a drive means 1404. [120] The inverting part 1420 may include an inverting part 1422 that inverts the battery cell 20 with the top cover 42 removed by 180 degrees. The inverting part 1422 may rotate the battery cell 20 180 degrees while fixing opposite ends of the battery cell 20, and then place the battery cell 20 back down on the stage 1900. A detailed description of the inverting part 1422 will be omitted.”
Claim 58:
“a discharge check part for checking” in claim 58. The specification in paragraph 101 discloses that the corresponding structure includes as follows “the prior preparation part 1000 includes a discharge check part 1100 for checking whether the battery cells 20 is discharged”, and the figures show a plain box for discharge check part 1110 in Figure 5. A person of ordinary skill in the art would appreciate that the discharge check part is a broad class of structures that check the battery cell discharge state and their functional equivalents.
“an aligning part for aligning” in claim 58. The specification in paragraph 101 discloses that the corresponding structure includes as follows “the prior preparation part 1000 includes… an aligning part 1200 for aligning the battery cells prior to cutting the pouch”, and the figures show a plain box for aligning part 1200 in Figure 5. A person of ordinary skill in the art would appreciate that the aligning part is a broad class of structures for aligning the battery cells and their functional equivalents.
Because this/these claim limitation(s) is/are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, it/they is/are being interpreted to cover the corresponding structure described in the specification as performing the claimed function, and equivalents thereof.
If applicant does not intend to have this/these limitation(s) interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, applicant may: (1) amend the claim limitation(s) to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph (e.g., by reciting sufficient structure to perform the claimed function); or (2) present a sufficient showing that the claim limitation(s) recite(s) sufficient structure to perform the claimed function so as to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph.
This application includes one or more claim limitations that use the word “means” or “step” (or a generic placeholder thereof) and are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph because the claim limitation(s) recite(s) the term means without sufficient structure, materials, or acts to entirely perform the recited function. Such claim limitation(s) is/are:
“a flame detection means” in both claims 58 and 59. Paragraph 55-56 discloses “[55] Further, the prior preparation part may include: a discharge check part for checking whether the battery cell is discharged; an aligning part for aligning the battery cells before cutting the battery cells; and a flame detection means for detecting whether the battery cell has a flame. [56] Further, the cutting part may cut the edge of the pouch by using a circular rotary cutter blade, and the material separation device may further include a flame detection means to check whether the battery cell has a flame, and the battery cell where the flame is detected may be pushed into a water tank containing water to prevent fire.”, and Paragraph 111 discloses “In the cutting part 1300, sparks are likely to be generated when the edge of the pouch 40 are cut by the cutter blade 1302. Therefore, each of the side cutting part 1310 and the terrace cutting part 1320 is provided with a flame detection means 1700 to check whether the battery cell is flamed. When the flame detection means 1700 checks whether a flame is generated, the battery cell that is detected to have a flame is pushed into the water tank 1580 containing water. After cutting, the battery cell is transferred to the idler part 1500, and the flame detected battery cell is immersed in the water tank 1580 of the idler part 1500. The idler part 1500 may include a pusher 1590 for pushing the battery cell into the water tank 1580. The flame detection means 1700 may also be provided in the cover separation part 1400.” Although the means is not explicitly stated, a person of ordinary skill in the art would appreciate that the detection means is a broad class of detector structures that check whether the battery cell is flamed, i.e., on fire.
Because this/these claim limitation(s) is/are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, it/they is/are being interpreted to cover the corresponding structure described in the specification as performing the claimed function, and equivalents thereof.
If applicant does not intend to have this/these limitation(s) interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, applicant may: (1) amend the claim limitation(s) to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph (e.g., by reciting sufficient structure to perform the claimed function); or (2) present a sufficient showing that the claim limitation(s) recite(s) sufficient structure to perform the claimed function so as to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph.
This application includes one or more claim limitations that use the word “means” or “step” (or a generic placeholder thereof) but are nonetheless not being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph because the claim limitation(s) recite(s) sufficient structure, materials, or acts to entirely perform the recited function. Such claim limitation(s) is/are:
“grip part for griping” in claim 13. The claim further recites that the grip part includes adsorption pads, which is sufficient structure, materials, or acts to entirely perform the recited function according to paragraph 132 of the specification, which recites “The unfold module 3120 may include a grip part 3130 for gripping the separator 32 of the electrode assembly 30, a vertical drive part 3140 for moving the grip part 3130 in a vertical direction, and a horizontal drive part 3150 for moving the vertical drive part 3140 in a Y-axis direction. The grip part 3130 includes an adsorption pad 3132 that vacuum adsorbs the separator.”.
Because this/these claim limitation(s) is/are not being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, it/they is/are not being interpreted to cover only the corresponding structure, material, or acts described in the specification as performing the claimed function, and equivalents thereof.
If applicant intends to have this/these limitation(s) interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, applicant may: (1) amend the claim limitation(s) to remove the structure, materials, or acts that performs the claimed function; or (2) present a sufficient showing that the claim limitation(s) does/do not recite sufficient structure, materials, or acts to perform the claimed function.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 8, 11, 13, 15, 16 and 52-59 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
Claim 8 recites the limitation in line 9 “a first unfold part which holds and unfolds” and in line 15 recites “a second unfold part for holding and unfolding”. It is unclear why one unfold part holds and unfolds, and the other unfold part is for holding and folding, and the claims appear to be a machine translation with grammatical inconsistencies. Additionally, most of the limitations in the claims use the term “part” also use the “part for…-ing” format, such as “an inverting part for inverting” and “a second unfold part for holding and unfolding”. The examiner suggests that this limitation be amended to “a first unfold part for holding and unfolding” in order to have grammatical consistency with the other limitations in the claim and to clarify any potential indefiniteness.
Claim 8 recites the limitation “an exposed first first electrode plate” in line 11 and “the first first electrode plate” in lines 13-14. There is insufficient antecedent basis for this limitation in the claim. The clear has earlier in line 6 introduced the term “first electrode plates” and the relationship of the later limitations is unclear. The duplication of the word first in the claim is unclear and appears to be indicating applicant intends to separate an exposed first plate of the first electrode plates. The examiner very strongly suggests amending the claim to more closely comply with standard patent language by reciting “an exposed first plate of the first electrode plates” in line 11 and “the exposed first plate of the first electrode plates” in lines 13-14. Appropriate correction is required.
Claims 11, 13, 15, 16 and 52-59 are rejected based on their dependency from claim 11.
Claim 11 recites the limitation "The material separation device of claim 10, wherein the first unfold part and the second unfolded part include" in lines 2-3. There is insufficient antecedent basis for this limitation in the claim. Claim 10 has been cancelled, and the subject matter was incorporated into claim 8. Additionally, claim 8 recites “a first unfold part”, and “a second unfold part”, and the term “unfolded” in line 3 appears to be a misspelling of the term “unfold”, and the term “the second unfolded part” lacks antecedent basis. The examiner suggests amending claim 11 to recite “The material separation device of claim 8, wherein the first unfold part and the second unfold part includes”.
Claims 13, 15, 16 and 52-59 are rejected based on their dependency from claim 11.
Claim 54 recites the limitation "the gripping unit" in line 3 (which is used again in lines 4 and line 5). There is insufficient antecedent basis for this limitation in the claim. Claim 52 and its parent claims 15 and 11 does not recite a gripping unit; however, claim 52 does recite a grip part for gripping. The examiner suggests using the term “the grip part for gripping” in lines 3, 4 and 5 each for consistency with parent claim 52.
Allowable Subject Matter
Claims 8, 11, 13, 15, 16 and 52-59 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action.
The following is a statement of reasons for the indication of allowable subject matter:
With respect to claim 8, the prior art of record does not disclose the additional features of “a primary removal part for separating an exposed first plate of the first electrode plates from the separator in a state where the separator is unfolded; an inverting part for inverting the electrode assembly in a state where the exposed first plate of the first electrode plates is removed; and a second unfold part for holding and unfolding one end of the separator surrounding an upper surface of the electrode assembly inverted by the inverting part”. Applicant’s preliminary amendment has cancelled earlier versions of claims 9 and 10 and inserted those features into claim 8.
As to claim 8, Sim (KR 20210014940 A) discloses a material separation device (the electrode material collection unit 300) for recycling a battery cell, the material separation device comprising: a main disassembly unit for separating the first electrode plates and the second electrode plates from the electrode assembly in which the separator is opened, and a primary removal part for separating an exposed first plate of the first electrode plates from the separator in a state where the separator is unfolded.
Sims does not disclose the features of “an inverting part for inverting the electrode assembly in a state where the exposed first electrode plate of the first electrode plates is removed; and a second unfold part for holding and unfolding one end of the separator surrounding an upper surface of the electrode assembly inverted by the inverting part”
Compare, for example, Figure 2 of Sim, reprinted below, with applicant’s Figure 21.
PNG
media_image1.png
418
646
media_image1.png
Greyscale
See the translation, disclosing:
That is, the negative electrode material separation roller so that the surface of the waste battery conveyed along the electrode material separation unit 400 passes through the negative electrode material separation roller 410 and the positive electrode material separation roller 420 so that a sharp inclination can be formed. 410 and the cathode material separation roller 420 may be installed, the anode material (A) and the cathode material in the waste battery that is rapidly bent while passing through the anode material separation roller 410 and the cathode material separation roller 420 (B) is separated and collected by falling into the negative electrode material collection unit 310 and the positive electrode material collection unit 320, and the separation membrane from which both the negative electrode material (A) and the positive electrode material (B) are separated is the separation membrane collection unit It is conveyed to 500 so that it can be collected in a roll format.
At this time, the electrode material separation unit 400 is provided between the anode material separation roller 410 and the cathode material separation roller 420 to allow the waste battery to be spread and transferred in a straight line to be further provided. I can.
According to an embodiment of the present invention, the transfer unit 800 may include a double roller 810, a support frame 820, and a prevention plate 830.
The dual roller 810 may serve to unfold a waste battery that is provided between the anode material separation roller 410 and the cathode material separation roller 420 and is transferred in a straight line.
Additionally, Carr (US 20040097223 A1) discloses the additional features a separator opening part (“pouch folding system 148”) for opening a separator surrounding an electrode assembly from which a pouch has been removed from a battery cell; wherein the separator opening part includes: a first unfold part (“folding arm 182”) which holds and unfolds one end of the separator surrounding the electrode assembly, but not the features of “an inverting part for inverting the electrode assembly in a state where the exposed first electrode plate of the first electrode plates is removed; and a second unfold part for holding and unfolding one end of the separator surrounding an upper surface of the electrode assembly inverted by the inverting part”
See paragraphs 0040-42, below:
[0039] The pouch folding system 148 assists the operator in reducing a size of the first battery cell 102. In this regard, as the chemical reaction has occurred within the first battery cell 102, and the pouch 110 is expanded, the pouch 110 is not cut to reduce a size of the first battery cell 102 for further recycling. Instead, in order to package the first battery cell 102 for further recycling, the pouch 110 is folded over and taped with the adhesive strip from the tape dispenser 142. With reference to FIG. 3, the pouch folding system 148 includes a handle 180 and a folding arm 182. The handle 180 is movable or rotatable relative to the recycling table 120 to move the folding arm 182. In one example, the recycling table 120 includes a fold slot 186 (FIG. 2) through which the folding arm 182 is received. The handle 180 is coupled to the folding arm 182 such that a rotation of the handle 180 results in a rotation of the folding arm 182. The handle 180 includes a graspable member 188 and a shaft 190. The graspable member 188 enables an operator to grab the handle 180 to rotate the handle 180 relative to the recycling table 120. In one example, the graspable member 188 is a knob. The recycling table 120 may include a flange 192, which projects outwardly from the second table surface 134 and receives the handle 180 in a first position. In the first position, the folding arm 182 is recessed or disposed below the second table surface 134. In a second position, the folding arm 182 extends through the fold slot 186 (FIG. 2) to fold the pouch 110 over the first battery cell 102 (FIG. 9). The shaft 190 is rotatably coupled to the recycling table 120 via one or more shaft flanges 194. The shaft flanges 194 may be substantially U-shaped, and may define a bore that receives the shaft 190 to enable the shaft 190 to rotate relative to the recycling table 120.
[0040] The folding arm 182 is coupled to the shaft 190. The folding arm 182 is substantially C-shaped, and includes a first folding arm 196, a second folding arm 198 and a base 200. The first folding arm 196 includes a lip 196a, which initially contacts the pouch 110 during a rotation of the handle 180. The first folding arm 196 is substantially parallel to the second table surface 134 or the Z-axis in the first position and the second position of the handle 180. The second folding arm 198 extends substantially perpendicular to the first folding arm 196, and is substantially parallel to the Y-axis in the first position and the second position. The second folding arm 198 is coupled to or integrally formed with the first folding arm 196, and is coupled to or integrally formed with the base 200. The second folding arm 198 is sized to enable the first folding arm 196 to extend through the fold slot 186, over the pouch 110 and the first battery cell 102 to hold the pouch 110 folded over the first battery cell 102 to enable the operator to secure the folded pouch 110 to the first battery cell 102. The base 200 is coupled to the shaft 190. In one example, the base 200 may be injection molded onto the shaft 190 or press fit onto shaft 190, however, mechanical fasteners may be used to couple the base 200 to the shaft 190. The base 200 is coupled to the shaft 190 such that the shaft 190 does not rotate relative to the base 200.
[0041] In one example, the recycling table 120 also includes a blocking arm system 184 rotatably coupled to the recycling table 120. With reference to FIG. 3B, the blocking arm system 184 includes a second handle 202 and a pair of block arms 204. The second handle 202 is movable or rotatable relative to the recycling table 120 to move the block arms 204 into the fold slot 186. The block arms 204 inhibit a movement of the battery cell 102, 104 rearward or away from a respective at least one of a first tab cutting blade 262, a second tab cutting blade 264 and a pouch cutting blade 272 during the cutting operation. The second handle 202 is coupled to the block arms 204 such that a rotation of the second handle 202 results in a rotation of the block arms 204. The second handle 202 includes a second graspable member 206 and a shaft 208. The second graspable member 206 enables an operator to grab the second handle 202 to rotate the second handle 202 relative to the recycling table 120. In one example, the second graspable member 206 is a knob. The recycling table 120 may include a flange 210 (see also FIG. 2), which projects outwardly from the second table surface 134 and receives the second handle 202 in the second position. In a first position, the block arms 204 are recessed or disposed below the second table surface 134. In the second position, the block arms 204 extend through the fold slot 186 (FIG. 2) to inhibit a movement of the battery cell 102, 104 during the cutting operation. Generally, in the first position, the second handle 202 is orientated about perpendicular to the first table surface 132. A rotation of the second handle 202 counterclockwise or toward the first table surface 132 by about 90 degrees moves the block arms 204 from the first position to the second position. The shaft 208 is rotatably coupled to the recycling table 120 via one or more shaft flanges 212. The shaft flanges 212 may be substantially U-shaped, and may define a bore that receives the shaft 208 to enable the shaft 208 to rotate relative to the recycling table 120.
Similarly, Fujiwara JP 2020194749 A discloses additional features but not the features of “an inverting part for inverting the electrode assembly in a state where the exposed first electrode plate of the first electrode plates is removed; and a second unfold part for holding and unfolding one end of the separator surrounding an upper surface of the electrode assembly inverted by the inverting part”. See the English translation of the written the translation, disclosing:
Next, a modified example of the present embodiment will be described. In the example of the electrode plate peeling device 20A of FIG. 3A, a water flow WO facing the transport direction of the laminated electrode 14 is generated in the water tank 21A with respect to the laminated electrode 14 on the conveyor 22A, and the water flow WO is the laminated electrode. However, in the electrode plate peeling device 20B as a modification shown in FIG. 3B, the ultrasonic transducers 25B are distributed and arranged at the bottom of the water tank 21B. Ultrasonic waves, not water streams, are applied to the laminated electrodes 14 on the conveyor 22B via the water W. This ultrasonic wave causes a relative motion between the water W and the laminated electrode 14, and causes the positive electrode plate 11, the negative electrode plate 12, and the separator 13 in the laminated electrode 14 to be separated. After that, the laminated electrode 14 is carried out of the water tank 21B and brought to the next second magnetic force sorting step. This is the same as the example in the case of FIG. 3A described above.
However, Sims, Carr, and Fujiwara does not disclose or make obvious the additional limitations of “an inverting part for inverting the electrode assembly in a state where the exposed first electrode plate of the first electrode plates is removed; and a second unfold part for holding and unfolding one end of the separator surrounding an upper surface of the electrode assembly inverted by the inverting part”
Any comments considered necessary by applicant must be submitted no later than the payment of the issue fee and, to avoid processing delays, should preferably accompany the issue fee. Such submissions should be clearly labeled “Comments on Statement of Reasons for Allowance.”
Conclusion
Any inquiry concerning this communication or earlier communications from the examiner should be directed to GEORGE R KOCH whose telephone number is (571)272-5807. The examiner can also be reached by E-mail at george.koch@uspto.gov if the applicant grants written authorization for e-mails. Authorization can be granted by filling out the USPTO Automated Interview Request (AIR) Form.
The examiner can normally be reached M-F 10-6:30.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, PHILIP C TUCKER can be reached at (571)272-1095. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/GEORGE R KOCH/Primary Examiner, Art Unit 1745
GRK