DETAILED ACTION
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Drawings
Figures 1 and 2 should be designated by a legend such as --Prior Art-- because only that which is old is illustrated. See MPEP § 608.02(g). Corrected drawings in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. The replacement sheet(s) should be labeled “Replacement Sheet” in the page header (as per 37 CFR 1.84(c)) so as not to obstruct any portion of the drawing figures. If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Claim Interpretation
The following is a quotation of 35 U.S.C. 112(f):
(f) Element in Claim for a Combination. – An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.
The following is a quotation of pre-AIA 35 U.S.C. 112, sixth paragraph:
An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.
The claims in this application are given their broadest reasonable interpretation using the plain meaning of the claim language in light of the specification as it would be understood by one of ordinary skill in the art. The broadest reasonable interpretation of a claim element (also commonly referred to as a claim limitation) is limited by the description in the specification when 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is invoked.
As explained in MPEP § 2181, subsection I, claim limitations that meet the following three-prong test will be interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph:
(A) the claim limitation uses the term “means” or “step” or a term used as a substitute for “means” that is a generic placeholder (also called a nonce term or a non-structural term having no specific structural meaning) for performing the claimed function;
(B) the term “means” or “step” or the generic placeholder is modified by functional language, typically, but not always linked by the transition word “for” (e.g., “means for”) or another linking word or phrase, such as “configured to” or “so that”; and
(C) the term “means” or “step” or the generic placeholder is not modified by sufficient structure, material, or acts for performing the claimed function.
Use of the word “means” (or “step”) in a claim with functional language creates a rebuttable presumption that the claim limitation is to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites sufficient structure, material, or acts to entirely perform the recited function.
Absence of the word “means” (or “step”) in a claim creates a rebuttable presumption that the claim limitation is not to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is not interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites function without reciting sufficient structure, material or acts to entirely perform the recited function.
Claim limitations in this application that use the word “means” (or “step”) are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action. Conversely, claim limitations in this application that do not use the word “means” (or “step”) are not being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action.
This application includes one or more claim limitations that do not use the word “means,” but are nonetheless being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, because the claim limitation(s) uses a generic placeholder that is coupled with functional language without reciting sufficient structure to perform the recited function and the generic placeholder is not preceded by a structural modifier. Such claim limitation(s) is/are:
“A processing unit (PU) configured to determine an angle/and or a velocity of rotation . . .” in claims 10-14.
Because this/these claim limitation(s) is/are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, it/they is/are being interpreted to cover the corresponding structure described in the specification as performing the claimed function, and equivalents thereof.
If applicant does not intend to have this/these limitation(s) interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, applicant may: (1) amend the claim limitation(s) to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph (e.g., by reciting sufficient structure to perform the claimed function); or (2) present a sufficient showing that the claim limitation(s) recite(s) sufficient structure to perform the claimed function so as to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1-14 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
Claim 1 recites the limitation "part of the common path" in line 13 of the claim. There is insufficient antecedent basis for this limitation in the claim. Noting that reference characters in parentheses do not affect the scope of a claim (see MPEP 608.01(m)), it is unclear what “the common path” refers to here. Is this the path through free space common to the first and second signals between the two ports that the first and second prisms are placed in earlier in the claim? Clarification is required.
Claim 6 recites that the first and second prisms are “triangular-based” in line 2 of the claim. It is unclear what “triangular-based” means in this context. Does it mean that the prisms are shaped in the form of triangles? Or does this mean that the prisms are shaped in the form of something like a triangle? The use of the phrase “triangular-based”, therefore, extends the scope of the expression to be indefinite, as it is not clear whether the prisms are actually triangles or if they are shaped in a form that is like a triangle but not necessarily a triangle itself.
Claim 7 recites the limitation "the corresponding vertex" in line 3-4 of the claim. There is insufficient antecedent basis for this limitation in the claim. What corresponding vertex is being referred to here? Noting that reference characters in parentheses do not affect the scope of a claim (see MPEP 608.01(m)), does this mean that the additional vertex of the first prism has the same angle as the additional vertex of the second prism? Or does the corresponding vertex refer to something else?
Claim 10 recites the limitation "the first incident optical signal and the second incident optical signal" in lines 2-3 of the claim. There is insufficient antecedent basis for this limitation in the claim. What first and second incident optical signals are being referred to here? At this point in claim 10, there is nothing that ties claim 10 back to claim 1, so antecedence for the limitation is lacking.
Claim 10 recites the limitation "the optical resonator" in line 4 of the claim. There is insufficient antecedent basis for this limitation in the claim. What optical resonator is being referred to here? At this point in claim 10, there is nothing that ties claim 10 back to claim 1, so antecedence for the limitation is lacking.
Regarding claim 10, the claim recites, “the source system comprising at least a first photodetector (PD1) and a second photodetector (PD2), which photodetectors are configured to detect optical signals extracted from said resonator via said optical system, and control and servo electronics” in lines 7-10 of the claim. The phrasing of the claim makes the last limitation “and control and servo electronics” unclear, as it is not clear whether the control and servo electronics are part of the source system itself, or whether the electronics are a separate element separate from the source system. Clarification is required.
Claim limitation “a processing unit” as found in claim 10 invokes 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. However, the written description fails to disclose the corresponding structure, material, or acts for performing the entire claimed function and to clearly link the structure, material, or acts to the function.
As “a processing unit” is being interpreted under 35 USC 112(f), the examiner turns to the specification to ascertain the structure that performs the entire claimed function. However, there is no explicit structure set forth in the instant specification that performs the entire claimed function. Indeed, as found in paragraph 0092, the specification only describes the processing unit using the language by which it is claimed – a processing unit. Therefore, it is not clear what the structure of the processing unit is. Is it a computer? Circuitry? Some other structure that can perform the claimed function?
Additionally, assuming the processing unit is a computer based means plus function limitation, the disclosed structure requires disclosure of an algorithm to perform the claimed function as well. See MPEP 2181 II. B. Some kind of algorithm must be present that allows for the processing unit to be able to determine an angle and/or a velocity of rotation about a Z-axis based on the electrical signals generated by said detectors, and in the best understanding of the examiner, such an algorithm does not exist as well.
Without answers to the above questions, and without a disclosed algorithm in the specification, the metes and bounds of the claim cannot be determined. Therefore, the claim is indefinite and is rejected under 35 U.S.C. 112(b) or pre-AIA 35 U.S.C. 112, second paragraph.
Applicant may:
(a) Amend the claim so that the claim limitation will no longer be interpreted as a limitation under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph;
(b) Amend the written description of the specification such that it expressly recites what structure, material, or acts perform the entire claimed function, without introducing any new matter (35 U.S.C. 132(a)); or
(c) Amend the written description of the specification such that it clearly links the structure, material, or acts disclosed therein to the function recited in the claim, without introducing any new matter (35 U.S.C. 132(a)).
If applicant is of the opinion that the written description of the specification already implicitly or inherently discloses the corresponding structure, material, or acts and clearly links them to the function so that one of ordinary skill in the art would recognize what structure, material, or acts perform the claimed function, applicant should clarify the record by either:
(a) Amending the written description of the specification such that it expressly recites the corresponding structure, material, or acts for performing the claimed function and clearly links or associates the structure, material, or acts to the claimed function, without introducing any new matter (35 U.S.C. 132(a)); or
(b) Stating on the record what the corresponding structure, material, or acts, which are implicitly or inherently set forth in the written description of the specification, perform the claimed function. For more information, see 37 CFR 1.75(d) and MPEP §§ 608.01(o) and 2181.
Claims 2-5, 8-9, and 11-14 are rejected by virtue of their dependence on at least claim 1, thereby containing all the limitations of the claims on which they depend.
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 10-14 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention.
Regarding claim 10, the claim is rejected for a lack of written description for the reasons set forth above regarding 35 USC 112(b) and indefiniteness. The rejection is made because an indefinite, unbounded limitation would cover all structure that can perform the claimed function. Because the specification has not clearly defined structure for the claimed processing unit configured to determine an angle and/or velocity of rotation, this indicates that applicant has not provided sufficient disclosure to show possession of the invention.
Claims 11-14 are rejected by virtue of their dependence on at least claim 10, thereby containing all the limitations of the claims on which they depend.
Allowable Subject Matter
Claims 1-14 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action.
The following is a statement of reasons for the indication of allowable subject matter:
As to claim 1, the prior art of record, taken either alone or in combination, fails to disclose or render obvious an optical system intended to be coupled to an optical resonator, the optical resonator comprising a first port and a second port and being configured so that a first optical signal and a second optical signal circulate in opposite directions, the optical system comprising, among other essential features, a first prism and a second prims, the prisms being placed on a path through free space that is common to the first and second signals between the two ports of the resonator, the first and second prisms each having a first and second external face that reflect a first and second incident optical signal, respectively, before their injection into the first and second ports, respectively, in combination with the rest of the limitations of the above claim.
With further regard to the above claim, US Pat. 4,247,831 to Lindop discloses (Fig. 1) an optical cavity formed by three mirrors 1, 2, and 3 that define a light path 4. Mirror 2 is partially transmitting to the outside, and amplifying medium 5 is between mirrors 1 and 2 to form a ring laser. Between mirrors 2 and 3 are a pair of prisms 9, 10 (seen in more detail in Fig. 2) including faces 11, 12, 13, and 14 that coincide with the plane of the optical path 4. The prisms are arranged so that optical path 4 intersects the faces of the prisms at Brewster’s angle (see Col. 3, lines 39-65). However, these prisms are located inside the optical cavity rather than outside of the cavity between first and second ports of the resonator as set forth by the instant claims, and there is no discussion about the external faces of the prisms reflecting incident light prior to the light being injected into the ports of the optical resonator.
Additionally, US 2021/0341288 to Mitani et al. discloses a gyroscope (Fig. 1) where a multicore fiber 14 is round into a coil shape on a bobbin 16 to form a sensing coil 15. The resonator includes input/output devices 11, 12 with a plurality of single mode fibers 13 between the input/output devices (see paragraphs 0027 and 0028). Mitani discloses in paragraph 0041 that the input/output devices that are capable of changing the traveling path of the light includes a prism that is shown in JP 5870426, with this prism being shown as prism 16b in Figs. 1 and 4. However, this combination of prior art also fails to disclose or render obvious the specifics of the claimed invention as discussed above.
Finally, while US 2019/0219396 to Krueger et al. discloses prisms 226a, 226b in a gyroscope (see Fig. 2A), these prisms are used to direct light to photodetectors PD1 and PD4, respectively, and wile US 2020/0025568 discloses a gyroscope (Fig. 2A) with ports 2226a, 226b which can be a prism (see paragraph 0043), these prisms are also used to direct light to photodetectors rather than being prisms which direct input light into the optical resonator in the arrangement set forth by the instant claim.
Conclusion
The prior art made of record and not relied upon is considered pertinent to applicant's disclosure. GB 2201774 to Baker discloses a fiber gyroscope where a prism 54 is used as shown in Fig. 5A in place of semi transparent mirrors 53 to separate reference radiation from sensing radiation that is sent to sensing coil 51 (see page 13).
Any inquiry concerning this communication or earlier communications from the examiner should be directed to Michael A. Lyons whose telephone number is (571)272-2420. The examiner can normally be reached Monday - Friday.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Michelle Iacoletti can be reached at 571-270-5789. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/Michael A Lyons/Primary Examiner, Art Unit 2877 October 23, 2026