Prosecution Insights
Last updated: November 04, 2026
Application No. 19/176,970

Sheet Material Dispense and Cutting Systems and Methods of Use

Non-Final OA §112§DOUBLEPATENT
Filed
Apr 11, 2025
Priority
Nov 08, 2019 — provisional 62/932,683 +1 more
Examiner
MATTHEWS, JENNIFER S
Art Unit
3724
Tech Center
3700 — Mechanical Engineering & Manufacturing
Assignee
Allen Reed Company Inc.
OA Round
1 (Non-Final)
54%
Grant Probability
Moderate
1-2
OA Rounds
1y 8m
Est. Remaining
76%
With Interview

Examiner Intelligence

Grants 54% of resolved cases
54%
Career Allowance Rate
459 granted / 844 resolved
-15.6% vs TC avg
Strong +22% interview lift
Without
With
+21.7%
Interview Lift
resolved cases with interview
Typical timeline
3y 3m
Avg Prosecution
42 currently pending
Career history
896
Total Applications
across all art units

Statute-Specific Performance

§101
0.5%
-39.5% vs TC avg
§103
50.4%
+10.4% vs TC avg
§102
19.0%
-21.0% vs TC avg
§112
27.0%
-13.0% vs TC avg
Black line = Tech Center average estimate • Based on career data from 844 resolved cases

Office Action

§112 §DOUBLEPATENT
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Information Disclosure Statement The information disclosure statement filed April 11, 2025 fails to comply with the provisions of 37 CFR 1.97, 1.98 and MPEP § 609 because there are no references cited for consideration. The Examiner acknowledges the IDS cover letter stating the references from parent application 17/ 081897 also serves as references for the instant application; however, the IDS filed 4/11/25 does not include any cited references for consideration and has not been considered. It has been placed in the application file, but the information referred to therein has not been considered as to the merits. Applicant is advised that the date of any re-submission of any item of information contained in this information disclosure statement or the submission of any missing element(s) will be the date of submission for purposes of determining compliance with the requirements based on the time of filing the statement, including all certification requirements for statements under 37 CFR 1.97(e). See MPEP § 609.05(a). Claim Objections Claim 4 objected to because of the following informalities: Claim 4 (line 2), should recite “an orientation.” Appropriate correction is required. Claim Interpretation The following is a quotation of 35 U.S.C. 112(f): (f) Element in Claim for a Combination. – An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. The following is a quotation of pre-AIA 35 U.S.C. 112, sixth paragraph: An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. The claims in this application are given their broadest reasonable interpretation using the plain meaning of the claim language in light of the specification as it would be understood by one of ordinary skill in the art. The broadest reasonable interpretation of a claim element (also commonly referred to as a claim limitation) is limited by the description in the specification when 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is invoked. As explained in MPEP § 2181, subsection I, claim limitations that meet the following three-prong test will be interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph: (A) the claim limitation uses the term “means” or “step” or a term used as a substitute for “means” that is a generic placeholder (also called a nonce term or a non-structural term having no specific structural meaning) for performing the claimed function; (B) the term “means” or “step” or the generic placeholder is modified by functional language, typically, but not always linked by the transition word “for” (e.g., “means for”) or another linking word or phrase, such as “configured to” or “so that”; and (C) the term “means” or “step” or the generic placeholder is not modified by sufficient structure, material, or acts for performing the claimed function. Use of the word “means” (or “step”) in a claim with functional language creates a rebuttable presumption that the claim limitation is to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites sufficient structure, material, or acts to entirely perform the recited function. Absence of the word “means” (or “step”) in a claim creates a rebuttable presumption that the claim limitation is not to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is not interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites function without reciting sufficient structure, material or acts to entirely perform the recited function. Claim limitations in this application that use the word “means” (or “step”) are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action. Conversely, claim limitations in this application that do not use the word “means” (or “step”) are not being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action. This application includes one or more claim limitations that do not use the word “means,” but are nonetheless being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, because the claim limitation(s) uses a generic placeholder that is coupled with functional language without reciting sufficient structure to perform the recited function and the generic placeholder is not preceded by a structural modifier. Such claim limitation(s) is/are: “slip-on engagement adapted to securely engage” in claim 6. Because this/these claim limitation(s) is/are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, it/they is/are being interpreted to cover the corresponding structure described in the specification as performing the claimed function, and equivalents thereof. If applicant does not intend to have this/these limitation(s) interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, applicant may: (1) amend the claim limitation(s) to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph (e.g., by reciting sufficient structure to perform the claimed function); or (2) present a sufficient showing that the claim limitation(s) recite(s) sufficient structure to perform the claimed function so as to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 3-4 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Regarding claim 3, the phrase “a raised portion is elevated relative to the lid locking portion, forming a triangle between the lid locking portion and the vertical leg” is indefinite. Per Merriam Webster the term elevated is defined as “raise especially above the ground or other surface.” If the raised portion is raised relative to the lid locking portion, what structures are connected to the raised portion to form the triangle? Do the structures to the raised portion, the lid locking portion, and vertical leg form the triangle? What structure(s) form the bases of the triangle, if the raised portion is elevated relative to the lid locking portion? Regarding claim 4, the phrase “wherein the raised portion has the orientation depicted in Figure 11F.” is indefinite. The claim does not define the structure of the raised portion with respect to any other portions of the lid lock or the orientation with respect to a view point. The structure of the raised portion cannot be defined with respect to Figure 11F, since this Figure does not impart structure, but merely provides a visual representation of the invention. Double Patenting The nonstatutory double patenting rejection is based on a judicially created doctrine grounded in public policy (a policy reflected in the statute) so as to prevent the unjustified or improper timewise extension of the “right to exclude” granted by a patent and to prevent possible harassment by multiple assignees. A nonstatutory double patenting rejection is appropriate where the conflicting claims are not identical, but at least one examined application claim is not patentably distinct from the reference claim(s) because the examined application claim is either anticipated by, or would have been obvious over, the reference claim(s). See, e.g., In re Berg, 140 F.3d 1428, 46 USPQ2d 1226 (Fed. Cir. 1998); In re Goodman, 11 F.3d 1046, 29 USPQ2d 2010 (Fed. Cir. 1993); In re Longi, 759 F.2d 887, 225 USPQ 645 (Fed. Cir. 1985); In re Van Ornum, 686 F.2d 937, 214 USPQ 761 (CCPA 1982); In re Vogel, 422 F.2d 438, 164 USPQ 619 (CCPA 1970); In re Thorington, 418 F.2d 528, 163 USPQ 644 (CCPA 1969). A timely filed terminal disclaimer in compliance with 37 CFR 1.321(c) or 1.321(d) may be used to overcome an actual or provisional rejection based on nonstatutory double patenting provided the reference application or patent either is shown to be commonly owned with the examined application, or claims an invention made as a result of activities undertaken within the scope of a joint research agreement. See MPEP § 717.02 for applications subject to examination under the first inventor to file provisions of the AIA as explained in MPEP § 2159. See MPEP § 2146 et seq. for applications not subject to examination under the first inventor to file provisions of the AIA . A terminal disclaimer must be signed in compliance with 37 CFR 1.321(b). The filing of a terminal disclaimer by itself is not a complete reply to a nonstatutory double patenting (NSDP) rejection. A complete reply requires that the terminal disclaimer be accompanied by a reply requesting reconsideration of the prior Office action. Even where the NSDP rejection is provisional the reply must be complete. See MPEP § 804, subsection I.B.1. For a reply to a non-final Office action, see 37 CFR 1.111(a). For a reply to final Office action, see 37 CFR 1.113(c). A request for reconsideration while not provided for in 37 CFR 1.113(c) may be filed after final for consideration. See MPEP §§ 706.07(e) and 714.13. The USPTO Internet website contains terminal disclaimer forms which may be used. Please visit www.uspto.gov/patent/patents-forms. The actual filing date of the application in which the form is filed determines what form (e.g., PTO/SB/25, PTO/SB/26, PTO/AIA /25, or PTO/AIA /26) should be used. A web-based eTerminal Disclaimer may be filled out completely online using web-screens. An eTerminal Disclaimer that meets all requirements is auto-processed and approved immediately upon submission. For more information about eTerminal Disclaimers, refer to www.uspto.gov/patents/apply/applying-online/eterminal-disclaimer. Claims 1 and 5 are rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1 and 2 of U.S. Patent No. 12,304,763. Although the claims at issue are not identical, they are not patentably distinct from each other because application claims 1 and 5 are anticipated by claims 1 and 2 of '763. Claim 1 to Neiberger of US Patent ‘763 teaches a sheet material dispenser system, comprising a sheet material dispenser (Fig. 1A) and a sheet material cutter (30) and a lid lock (15) configured to be separate from and attachable to the sheet material dispenser; wherein the sheet material dispenser comprises a cuboid box (Fig. 4c) having a top lid, a bottom, a front side, a back side, and two opposing lateral sides, with the front side, the back side, the bottom and the top lid defining a longer dimension of the cuboid shaped box and the two opposing lateral sides defining a shorter dimension of the cuboid shaped box, wherein the top lid is attached to the back side along a length of the back side at an attachment line and is rotatable along the attachment line between an open position and a closed position to provide access to an open area adapted to hold a roll of sheet material, and wherein the roll of sheet material, when present, is oriented parallel with the longer dimension of the cuboid shaped box in the open area such that an end of the sheet material exits the box through the top lid at a gap parallel with the longer dimension of the cuboid shaped box; wherein the lid lock comprises a vertical leg portion (10) intersecting a horizontal lid locking portion (15) forming an L-shaped body, the horizontal lid locking portion being a flat extension that protrudes perpendicularly from the vertical leg portion, the horizontal lid locking portion (15) extends over and adjacent to the top lid and is configured to lock the top lid of the sheet material dispenser, the vertical leg (10) is configured to attach to a front side or back side of the dispenser; the sheet material cutter (30) consisting of an abrasive surface adapted to cut the sheet material, wherein the sheet material cutter is positioned on the vertical leg portion. Here, the more specific patent claims encompass the broader application claims. Following the rationale in In re Goodman cited in the preceding paragraph, where applicant has once been granted a patent containing a claim for the specific narrow invention, applicant may not obtain a second patent with a claim for the generic or broader invention without first submitting an appropriate terminal disclaimer. The chart below details the relationship between of the pending claims and Patent '763, which are being rejected under nonstatutory double patenting. This is a provisional nonstatutory double patenting rejection because the patentably indistinct claims have not in fact been patented. Allowable Subject Matter Claim 1 would be allowable by filing a Terminal Disclaimer to overcome the double patenting rejection. Walder (CH703368) teaches a sheet dispenser system having a dispenser, a sheet material and a lid lock. The lid lock of Walder is integral with a housing which receives the dispenser. The housing of Walder comprises a plurality of L-shapes, but does not teach a vertical leg configured to attach to the dispenser and a horizontal lid portion intersecting the vertical leg portion. Ochiai (JP 05262350) teaches a lid lock for use with a sheet dispenser having a body and an abrasive cutting blade. The lid lock is detachably mounted to the dispenser and has a body which comprises an L-shape. Ochiai does not teach the horizontal leg being configured to extend over and adjacent to the lid so that it is configured to lock the top lid. Amdahl et al. (US 20200048025) teaches a sheet dispenser system having a dispenser, a sheet material and a lid lock. The lid lock of Amdahl is integral with a housing which attaches to the dispenser. The housing of Amdahl comprises a plurality of L-shapes, but does not teach the horizontal leg being configured to extend over and adjacent to the lid so that it is configured to lock the top lid. Conclusion The prior art made of record and not relied upon is considered pertinent to applicant's disclosure. US Patent No. 5,440,961 teaches a sheet material dispenser having a dispenser and a sheet material cutter with two or more leg portions. US Patent No. 7,921,756 teaches a sheet material cutter and a lid lock having a vertical leg and a substantially horizontal leg for locking a portion of a lid while cutting. Any inquiry concerning this communication or earlier communications from the examiner should be directed to JENNIFER S MATTHEWS whose telephone number is (571)270-5843. The examiner can normally be reached Monday-Thursday 8am-4pm. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Boyer Ashley can be reached at 571-272-4502. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /JENNIFER S MATTHEWS/Primary Examiner, Art Unit 3724
Read full office action

Prosecution Timeline

Apr 11, 2025
Application Filed
Oct 20, 2026
Non-Final Rejection mailed — §112, §DOUBLEPATENT (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12773804
SAFETY BRAKES FOR CIRCULAR SAW BLADES, CIRCULAR SAWS THAT INCLUDE THE SAFETY BRAKES, AND METHODS OF OPERATING CIRCULAR SAWS
3y 10m to grant Granted Oct 27, 2026
Patent 12773802
CUTTER APPARATUS FOR DOUBLE PIPE
3y 11m to grant Granted Oct 27, 2026
Patent 12773799
CONVENIENT PORTABLE KNIFE
2y 4m to grant Granted Oct 27, 2026
Patent 12766618
ACCESSORY FOR AN OSCILLATING POWER TOOL
4y 2m to grant Granted Oct 20, 2026
Patent 12766755
PORTABLE WORK APPARATUS
2y 3m to grant Granted Oct 20, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
54%
Grant Probability
76%
With Interview (+21.7%)
3y 3m (~1y 8m remaining)
Median Time to Grant
Low
PTA Risk
Based on 844 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month