Prosecution Insights
Last updated: November 20, 2026
Application No. 19/198,955

Security Context Handling in 5G During Idle Mode

Non-Final OA §DOUBLEPATENT
Filed
May 05, 2025
Priority
Jan 30, 2017 — provisional 62/452,267 +6 more
Examiner
HARRIS, CHRISTOPHER C
Art Unit
2432
Tech Center
2400 — Computer Networks
Assignee
Telefonaktiebolaget LM Ericsson
OA Round
1 (Non-Final)
77%
Grant Probability
Favorable
1-2
OA Rounds
1y 4m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 77% — above average
77%
Career Allowance Rate
290 granted / 378 resolved
+18.7% vs TC avg
Strong +25% interview lift
Without
With
+25.3%
Interview Lift
resolved cases with interview
Typical timeline
2y 10m
Avg Prosecution
17 currently pending
Career history
411
Total Applications
across all art units

Statute-Specific Performance

§101
15.4%
-24.6% vs TC avg
§103
41.1%
+1.1% vs TC avg
§102
9.6%
-30.4% vs TC avg
§112
27.0%
-13.0% vs TC avg
Black line = Tech Center average estimate • Based on career data from 378 resolved cases

Office Action

§DOUBLEPATENT
Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status. DETAILED ACTION REMARKS This action is in response to communications filed on 08/19/2026 claim(s) 13-20 are withdrawn. Therefore, claims 1-12 are presently pending in the application and have been considered as follows. Election/Restrictions Applicant’s election without traverse of Group 1 in the reply filed on 08/19/2026 is acknowledged. Double Patenting The nonstatutory double patenting rejection is based on a judicially created doctrine grounded in public policy (a policy reflected in the statute) so as to prevent the unjustified or improper timewise extension of the “right to exclude” granted by a patent and to prevent possible harassment by multiple assignees. A nonstatutory double patenting rejection is appropriate where the conflicting claims are not identical, but at least one examined application claim is not patentably distinct from the reference claim(s) because the examined application claim is either anticipated by, or would have been obvious over, the reference claim(s). See, e.g., In re Berg, 140 F.3d 1428, 46 USPQ2d 1226 (Fed. Cir. 1998); In re Goodman, 11 F.3d 1046, 29 USPQ2d 2010 (Fed. Cir. 1993); In re Longi, 759 F.2d 887, 225 USPQ 645 (Fed. Cir. 1985); In re Van Ornum, 686 F.2d 937, 214 USPQ 761 (CCPA 1982); In re Vogel, 422 F.2d 438, 164 USPQ 619 (CCPA 1970); In re Thorington, 418 F.2d 528, 163 USPQ 644 (CCPA 1969). A timely filed terminal disclaimer in compliance with 37 CFR 1.321(c) or 1.321(d) may be used to overcome an actual or provisional rejection based on nonstatutory double patenting provided the reference application or patent either is shown to be commonly owned with the examined application, or claims an invention made as a result of activities undertaken within the scope of a joint research agreement. See MPEP § 717.02 for applications subject to examination under the first inventor to file provisions of the AIA as explained in MPEP § 2159. See MPEP §§ 706.02(l)(1) - 706.02(l)(3) for applications not subject to examination under the first inventor to file provisions of the AIA . A terminal disclaimer must be signed in compliance with 37 CFR 1.321(b). The USPTO Internet website contains terminal disclaimer forms which may be used. Please visit www.uspto.gov/patent/patents-forms. The filing date of the application in which the form is filed determines what form (e.g., PTO/SB/25, PTO/SB/26, PTO/AIA /25, or PTO/AIA /26) should be used. A web-based eTerminal Disclaimer may be filled out completely online using web-screens. An eTerminal Disclaimer that meets all requirements is auto-processed and approved immediately upon submission. For more information about eTerminal Disclaimers, refer to www.uspto.gov/patents/process/file/efs/guidance/eTD-info-I.jsp Claims 1-12 are rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-26 of U.S. Patent No. 10536849B2 Although the claims at issue are not identical, they are not patentably distinct from each other because they are broader but anticipated by the patent as indicated in the table below: App 19/198,955 U.S. Patent No. 10536849B2 1. A method for establishing a new security context during a handover implemented by a user equipment in a wireless communication network, the method comprising: receiving a handover message from a source base station, said handover message including a key change indicator flag set to a value indicating that a non-access stratum key has been changed; performing a handover from the source base station to a target base station; establishing, responsive to the key change indicator flag, the new security context with a target Access and Mobility Management Function, said new security context including a new non-access stratum key; and generating the new non-access stratum key from a previous non-access stratum key. 2. The method of claim 1 further comprising generating the new non-access stratum key using the previous non-access stratum key and a key derivation parameter. 3. The method of claim 2 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 4. The method of claim 2 wherein the key derivation parameter is received with the key change indicator flag in the handover message. 5. The method of claim 1 wherein the handover message is a handover command. 6. The method of claim 1 wherein the non-access stratum key is a core network key. 7. A user equipment for handover implemented by a user equipment in a wireless communication network, the user equipment comprising: an interface circuit for communicating with one or more base stations in the wireless communication network; and a processing circuit configured to: receive a handover message from a source base station in the wireless communication network, said handover message including a key change indicator flag set to a value indicating that a non-access stratum key has been changed based on an operator specific policy; perform a handover from the source base station to a target base station in the wireless communication network; establish, responsive to the key change indicator flag, a new security context with the target Access and Mobility Management Function, said new security context including a new non-access stratum key; and generate the new non-access stratum key from a previous non-access stratum key. 8. The user equipment of claim 7 wherein the processing circuit is further configured to generate the new non-access stratum key using the previous non-access stratum key and a key derivation parameter. 9. The user equipment of claim 8 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 10. The user equipment of claim 8 wherein the processing circuit is further configured to receive the key derivation parameter with the key change indicator flag in the handover message. 11. The user equipment of claim 7 wherein the handover message is a handover command. 12. The user equipment of claim 7 wherein the non-access stratum key is a core network key. 1. A method for transferring a security context during a handover of a user equipment, the method implemented by one or more core network nodes in a core network of the wireless communication network, wherein the one or more core network nodes provide a source Third Generation Partnership Project Fifth Generation systems (3GPP-5G) Access and Mobility Management Function, the method comprising: receiving, from a source base station, a first handover message indicating that a handover of the user equipment is needed; generating a new non-access stratum key responsive to determining that an operator specific policy is met; sending, responsive to the first handover message, the new non-access stratum key to a target 3GPP-5G Access and Mobility Management Function; and sending, to the user equipment, a second handover message including: a key change indicator flag set to a value indicating a change of the non-access stratum key; and an indication of at least one non-access stratum security algorithm selected by the target 3GPP-5G Access and Mobility Management Function and indicating a non-access stratum security algorithm to be used by the user equipment. 2. The method of claim 1 wherein generating the new non-access stratum key comprises: generating the new non-access stratum key from a previous non-access stratum key and a key derivation parameter. 3. The method of claim 2 further comprising sending the key derivation parameter to the user equipment. 4. The method of claim 1 wherein the first handover message is a handover required message indicating a need for a handover of the user equipment. 5. The method of claim 1 wherein the second handover message is a handover command. 6. The method of claim 1 wherein the new non-access stratum key is sent to the target 3GPP-5G Access and Mobility Management Function in a forward relocation request message. 7. The method of claim 1 wherein the non-access stratum key is a core network key. 8. A core network node in a core network of a wireless communication network, said core network node providing a source Third Generation Partnership Project Fifth Generation systems (3GPP-5G) Access and Mobility Management Function, said core network nodes comprising: an interface circuit for communicating with a source base station and a target 5G Access and Mobility Management Function; and a processing circuit configured to: receive, from a source base station, a first handover message indicating that a handover of the user equipment is needed; generate a new non-access stratum key responsive to determining that an operator specific policy is met; send, responsive to the first handover message, the new non-access stratum key to a target 3GPP-5G Access and Mobility Management Function; and send, to the user equipment, a second handover message including: a key change indicator flag set to a value indicating a change of the non-access stratum key; and an indication of at least one non-access stratum security algorithm selected by the target 3GPP-5G Access and Mobility Management Function and indicating a non-access stratum security algorithm to be used by the user equipment. 9. The core network node of claim 8 wherein the processing circuit is further configured to generate the new non-access stratum key by generating the new non-access stratum key from a previous non-access stratum key and a key derivation parameter. 10. The core network node of claim 9 wherein the processing circuit is further configured to send the key derivation parameter to the user equipment. 11. The core network node of claim 8 wherein the first handover message is a handover required message indicating a need for a handover of the user equipment. 12. The core network node of claim 8 wherein the second handover message is a handover command. 13. The core network node of claim 8 wherein the processing circuit is configured to send the new non-access stratum key to the target 3GPP-5G Access and Mobility Management Function in a forward relocation request message. 14. The core network node of claim 8 wherein the non-access stratum key is a core network key. 15. A method for establishing a new security context during a handover implemented by a user equipment in a wireless communication network, the method comprising: receiving a handover message from a source base station, said handover message including: a key change indicator flag set to a value indicating that a non-access stratum key has been changed based on an operator specific policy; and an indication of at least one non-access stratum security algorithm selected by a target Third Generation Partnership Project Fifth Generation systems (3GPP-5G) Access and Mobility Management Function and indicating a non-access stratum security algorithm to be used by the user equipment; performing a handover from the source base station to a target base station; and establishing, responsive to the key change indicator flag, the new security context with the target 3GPP-5G Access and Mobility Management Function, said new security context including a new non-access stratum key. 16. The method of claim 15 further comprising generating the new non-access stratum key using a previous non-access stratum key and a key derivation parameter. 17. The method of claim 16 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 18. The method of claim 16 wherein the key derivation parameter is received with the key change indicator flag in the handover message. 19. The method of claim 15 wherein the handover message is a handover command. 20. The method of claim 15 wherein the non-access stratum key is a core network key. 21. A user equipment for handover implemented by a user equipment in a wireless communication network, the user equipment comprising: an interface circuit for communicating with one or more base stations in the wireless communication network; and a processing circuit configured to: receive a handover message from a source base station in the wireless communication network, said handover message including: a key change indicator flag set to a value indicating that a non-access stratum key has been changed based on an operator specific policy; an indication of at least one non-access stratum security algorithm selected by a target Third Generation Partnership Project Fifth Generation systems (3GPP-5G) Access and Mobility Management Function and indicating a non-access stratum security algorithm to be used by the user equipment; perform a handover from the source base station to a target base station in the wireless communication network; and establish, responsive to the key change indicator flag, a new security context with the target 3G PP-5G Access and Mobility Management Function, said new security context including a new non-access stratum key. 22. The user equipment of claim 21 wherein the processing circuit is further configured to generate the new non-access stratum key using a previous non-access stratum key and a key derivation parameter. 23. The user equipment of claim 22 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 24. The user equipment of claim 22 wherein the processing circuit is further configured to receive the key derivation parameter with the key change indicator flag in the handover message. 25. The user equipment of claim 21 wherein the handover message is a handover command. 26. The user equipment of claim 21 wherein the non-access stratum key is a core network key. Claims 1-12 are rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-26 of U.S. Patent No. 11432141B2 Although the claims at issue are not identical, they are not patentably distinct from each other because they are broader but anticipated by the patent as indicated in the table below: App 19/198,955 U.S. Patent No. 11432141B2 1. A method for establishing a new security context during a handover implemented by a user equipment in a wireless communication network, the method comprising: receiving a handover message from a source base station, said handover message including a key change indicator flag set to a value indicating that a non-access stratum key has been changed; performing a handover from the source base station to a target base station; establishing, responsive to the key change indicator flag, the new security context with a target Access and Mobility Management Function, said new security context including a new non-access stratum key; and generating the new non-access stratum key from a previous non-access stratum key. 2. The method of claim 1 further comprising generating the new non-access stratum key using the previous non-access stratum key and a key derivation parameter. 3. The method of claim 2 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 4. The method of claim 2 wherein the key derivation parameter is received with the key change indicator flag in the handover message. 5. The method of claim 1 wherein the handover message is a handover command. 6. The method of claim 1 wherein the non-access stratum key is a core network key. 7. A user equipment for handover implemented by a user equipment in a wireless communication network, the user equipment comprising: an interface circuit for communicating with one or more base stations in the wireless communication network; and a processing circuit configured to: receive a handover message from a source base station in the wireless communication network, said handover message including a key change indicator flag set to a value indicating that a non-access stratum key has been changed based on an operator specific policy; perform a handover from the source base station to a target base station in the wireless communication network; establish, responsive to the key change indicator flag, a new security context with the target Access and Mobility Management Function, said new security context including a new non-access stratum key; and generate the new non-access stratum key from a previous non-access stratum key. 8. The user equipment of claim 7 wherein the processing circuit is further configured to generate the new non-access stratum key using the previous non-access stratum key and a key derivation parameter. 9. The user equipment of claim 8 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 10. The user equipment of claim 8 wherein the processing circuit is further configured to receive the key derivation parameter with the key change indicator flag in the handover message. 11. The user equipment of claim 7 wherein the handover message is a handover command. 12. The user equipment of claim 7 wherein the non-access stratum key is a core network key. 1. A method for transferring a security context during a handover of a user equipment, the method implemented by one or more core network nodes in a core network of a fifth generation (5G) wireless communication network, wherein the one or more core network nodes provide a source Access and Mobility Management Function, the method comprising: receiving, from a source base station, a first handover message indicating that a handover of the user equipment is needed; generating a new non-access stratum key from a previous non-access stratum key responsive to determining that an operator specific policy is met; sending, responsive to the first handover message, the new non-access stratum key to a target Access and Mobility Management Function; and sending, to the user equipment, a second handover message including a key change indicator flag set to a value indicating a change of the non-access stratum key. 2. The method of claim 1 wherein the new non-access stratum key is generated from the previous non-access stratum key and a key derivation parameter. 3. The method of claim 2 further comprising sending the key derivation parameter to the user equipment. 4. The method of claim 1 wherein the first handover message is a handover required message indicating a need for a handover of the user equipment. 5. The method of claim 1 wherein the second handover message is a handover command. 6. The method of claim 1 wherein the new non-access stratum key is sent to the target Access and Mobility Management Function in a forward relocation request message. 7. The method of claim 1 wherein the non-access stratum key is a core network key. 8. A core network node in a core network of a fifth generation (5G) wireless communication network, said core network node providing a source Access and Mobility Management Function, said core network nodes comprising: an interface circuit for communicating with a source base station and a target Access and Mobility Management Function; and a processing circuit configured to: receive, from a source base station, a first handover message indicating that a handover of the user equipment is needed; generate a new non-access stratum key from a previous non-access stratum key responsive to determining that an operator specific policy is met; send, responsive to the first handover message, the new non-access stratum key to a target Access and Mobility Management Function; and send, to the user equipment, a second handover message including a key change indicator flag set to a value indicating a change of the non-access stratum key. 9. The core network node of claim 8 wherein the processing circuit is further configured to generate the new non-access stratum key from the previous non-access stratum key and a key derivation parameter. 10. The core network node of claim 8 wherein the processing circuit is further configured to send the key derivation parameter to the user equipment. 11. The core network node of claim 8 wherein the first handover message is a handover required message indicating a need for a handover of the user equipment. 12. The core network node of claim 8 wherein the second handover message is a handover command. 13. The core network node of claim 8 wherein the processing circuit is configured to send the new non-access stratum key to the target Access and Mobility Management Function in a forward relocation request message. 14. The core network node of claim 8 wherein the non-access stratum key is a core network key. 15. A method for establishing a new security context during a handover implemented by a user equipment in a fifth generation (5G) wireless communication network, the method comprising: receiving a handover message from a source base station, said handover message including a key change indicator flag set to a value indicating that a non-access stratum key has been changed based on an operator specific policy; performing a handover from the source base station to a target base station; establishing, responsive to the key change indicator flag, the new security context with a target Access and Mobility Management Function, said new security context including a new non-access stratum key; and generating the new non-access stratum key from a previous non-access stratum key. 16. The method of claim 15 further comprising generating the new non-access stratum key using the previous non-access stratum key and a key derivation parameter. 17. The method of claim 16 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 18. The method of claim 16 wherein the key derivation parameter is received with the key change indicator flag in the handover message. 19. The method of claim 15 wherein the handover message is a handover command. 20. The method of claim 15 wherein the non-access stratum key is a core network key. 21. A user equipment for handover implemented by a user equipment in a fifth generation (5G) wireless communication network, the user equipment comprising: an interface circuit for communicating with one or more base stations in the wireless communication network; and a processing circuit configured to: receive a handover message from a source base station in the wireless communication network, said handover message including a key change indicator flag set to a value indicating that a non-access stratum key has been changed based on an operator specific policy; perform a handover from the source base station to a target base station in the wireless communication network; establish; responsive to the key change indicator flag, a new security context with a target Access and Mobility Management Function, said new security context including a new non-access stratum key; and generate the new non-access stratum key from a previous non-access stratum key. 22. The user equipment of claim 21 wherein the processing circuit is further configured to generate the new non-access stratum key using the previous non-access stratum key and a key derivation parameter. 23. The user equipment of claim 22 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 24. The user equipment of claim 22 wherein the processing circuit is further configured to receive the key derivation parameter with the key change indicator flag in the handover message. 25. The user equipment of claim 21 wherein the handover message is a handover command. 26. The user equipment of claim 21 wherein the non-access stratum key is a core network key. Claims 1-12 are rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-20 of U.S. Patent No. 11743718B2. Although the claims at issue are not identical, they are not patentably distinct from each other because they are broader but anticipated by the patent as indicated in the table below: App 19/198,955 U.S. Patent No. 11743718B2. 1. A method for establishing a new security context during a handover implemented by a user equipment in a wireless communication network, the method comprising: receiving a handover message from a source base station, said handover message including a key change indicator flag set to a value indicating that a non-access stratum key has been changed; performing a handover from the source base station to a target base station; establishing, responsive to the key change indicator flag, the new security context with a target Access and Mobility Management Function, said new security context including a new non-access stratum key; and generating the new non-access stratum key from a previous non-access stratum key. 2. The method of claim 1 further comprising generating the new non-access stratum key using the previous non-access stratum key and a key derivation parameter. 3. The method of claim 2 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 4. The method of claim 2 wherein the key derivation parameter is received with the key change indicator flag in the handover message. 5. The method of claim 1 wherein the handover message is a handover command. 6. The method of claim 1 wherein the non-access stratum key is a core network key. 7. A user equipment for handover implemented by a user equipment in a wireless communication network, the user equipment comprising: an interface circuit for communicating with one or more base stations in the wireless communication network; and a processing circuit configured to: receive a handover message from a source base station in the wireless communication network, said handover message including a key change indicator flag set to a value indicating that a non-access stratum key has been changed based on an operator specific policy; perform a handover from the source base station to a target base station in the wireless communication network; establish, responsive to the key change indicator flag, a new security context with the target Access and Mobility Management Function, said new security context including a new non-access stratum key; and generate the new non-access stratum key from a previous non-access stratum key. 8. The user equipment of claim 7 wherein the processing circuit is further configured to generate the new non-access stratum key using the previous non-access stratum key and a key derivation parameter. 9. The user equipment of claim 8 wherein the key derivation parameter comprises one of a nonce, timestamp, freshness parameter, version number, and static information. 10. The user equipment of claim 8 wherein the processing circuit is further configured to receive the key derivation parameter with the key change indicator flag in the handover message. 11. The user equipment of claim 7 wherein the handover message is a handover command. 12. The user equipment of claim 7 wherein the non-access stratum key is a core network key. 1. A method for transferring a security context during a handover of a user equipment, the method implemented by one or more core network nodes in a core network of a wireless communication network, wherein the one or more core network nodes provide a source Access and Mobility Management Function (AMF) the method comprising: receiving, from a source base station in an access network of the wireless communication network, a first handover message indicating that a handover of the user equipment is needed; deriving a new non-access stratum (NAS) key responsive to deciding that an operator specific security policy is met, wherein the NAS key is used to derive NAS ciphering and integrity protection keys for protection of NAS signaling between the UE and AMF; sending, responsive to the first handover message, the new NAS key to a target AMF in the core network of the wireless communication network; and sending, in a second handover message, a key derivation parameter and a key change indication to the user equipment, the key change indication comprising a key change indicator flag set to a value indicating a change of a NAS key. 2. The method of claim 1, further comprising: receiving, from the target AMF, a NAS security algorithm indication indicating at least one NAS security algorithm to be used by the user equipment; and forwarding the NAS security algorithm indication to the user equipment. 3. The method of claim 1, wherein the first handover message is a handover required message indicating a need for a handover of the user equipment. 4. The method of claim 1, wherein the second handover message is a handover command. 5. The method of claim 1, wherein the new NAS key is derived from a previous NAS key. 6. A core network node in a core network of a wireless communication network, said core network node providing a source Access and Mobility Management Function (AMF) and comprising: an interface circuit for communicating with a source base station and a target AMF; and a processing circuit configured to: receive, from the source base station in an access network of the wireless communication network, a first handover message indicating that a handover of a user equipment is needed; derive a new non-access stratum (NAS) key responsive to deciding that an operator specific security policy is met, wherein the NAS key is used to derive NAS ciphering and integrity protection keys for protection of NAS signaling between the UE and AMF; send, responsive to the first handover message, the new NAS key to the target AMF in the core network of the wireless communication network; and send, in a second handover message, a key derivation parameter and a key change indication to the user equipment, the key change indication comprising a key change indicator flag set to a value indicating a change of a NAS key. 7. The core network node of claim 6, wherein the processing circuit is further configured to: receive, from the target AMF, a NAS security algorithm indication indicating at least one NAS security algorithm to be used by the user equipment; and forward the NAS security algorithm indication to the user equipment. 8. The core network node of claim 6, wherein the first handover message is a handover required message indicating a need for a handover of the user equipment. 9. The core network node of claim 6, wherein the second handover message is a handover command. 10. The core network node of claim 6, wherein the processing circuit is further configured to derive the new NAS key from a previous NAS key. 11. A method for establishing a new security context during a handover implemented by a user equipment in a wireless communication network, the method comprising: receiving a handover message from a source base station connected to a source Access and Mobility Management Function (AMF) said handover message including a key derivation parameter and a key change indication comprising a key change indicator flag set to a value indicating that a non-access stratum (NAS) key has been changed based on an operator specific security policy; deriving a new NAS key in response to the reception of the key change indicator flag using a NAS key and the key derivation parameter, wherein the NAS key is used to derive NAS ciphering and integrity protection keys for protection of NAS signaling between the UE and AMF; performing a handover from the source base station to a target base station connected to a target AMF; and establishing the new security context with the target AMF, said new security context including the new NAS key. 12. The method of claim 11, wherein the key derivation parameter is a freshness parameter. 13. The method of claim 11, wherein the handover message is a handover command. 14. The method of claim 11, wherein the new NAS key is derived from a previous NAS key. 15. The method of claim 11, wherein the new NAS key is a core network key (KCN). 16. A user equipment in a wireless communication network, the user equipment comprising: an interface circuit for communicating with one or more base stations in an access network of the wireless communication network; and a processing circuit configured to: receive a handover message from a source base station connected to a source Access and Mobility Management Function (AMF) said handover message including a key derivation parameter and a key change indication comprising a key change indicator flag set to a value indicating that a non-access stratum (NAS) key has been changed based on an operator specific security policy; derive a new NAS key in response to the reception of the key change indicator flag using a NAS key and the key derivation parameter, wherein the NAS key is used to derive NAS ciphering and integrity protection keys for protection of NAS signaling between the UE and AMF; perform a handover from the source base station to a target base station connected to a target AMF; and establish a new security context with the target AMF, said new security context including the new NAS key. 17. The user equipment of claim 16, wherein the key derivation parameter is a freshness parameter. 18. The user equipment of claim 16, wherein the handover message is a handover command. 19. The user equipment of claim 16, wherein the NAS key is derived from a previous NAS key. 20. The user equipment of claim 16, wherein the NAS key is a core network key (KCN). Allowable Subject Matter Claim(s) 1-12 would be allowable if a terminal disclaimer is filed and approved to overcome the double patenting rejection, set forth in this Office action. Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to CHRISTOPHER C HARRIS whose telephone number is (571)270-7841. The examiner can normally be reached Monday through Friday between 8:00 AM to 4:00 PM CST. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Jeffrey L Nickerson can be reached on (469) 295-9235. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /CHRISTOPHER C HARRIS/Primary Examiner, Art Unit 2432
Read full office action

Prosecution Timeline

May 05, 2025
Application Filed
Oct 20, 2026
Non-Final Rejection mailed — §DOUBLEPATENT (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12771680
System, Method, and Computer Program Product for Managing Computational Cluster Access to Multiple Domains
2y 2m to grant Granted Oct 20, 2026
Patent 12763952
CROSS CERTIFICATION METHOD AND CERTIFYING DEVICE FOR PROVIDING THE METHOD
1y 10m to grant Granted Oct 13, 2026
Patent 12745090
NETWORK-LEVEL ELEVATED SECURITY EXECUTION MODES FOR NETWORK-ACCESSIBLE DEVICES
2y 8m to grant Granted Sep 22, 2026
Patent 12745081
POINTER MECHANISMS FOR COMMUNICATING AUTHENTICATION AND KEY MANAGEMENT (AKM) AND CIPHERS
1y 12m to grant Granted Sep 22, 2026
Patent 12737457
Machine Learning Process Detection
2y 9m to grant Granted Sep 15, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
77%
Grant Probability
99%
With Interview (+25.3%)
2y 10m (~1y 4m remaining)
Median Time to Grant
Low
PTA Risk
Based on 378 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month