Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Claim Rejections - 35 USC § 112
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 1-20 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention.
MPEP § 2163.04 states that “The inquiry into whether the description requirement is met must be determined on a case-by-case basis and is a question of fact”, “A description as filed is presumed to be adequate, unless or until sufficient evidence or reasoning to the contrary has been presented by the examiner to rebut the presumption.” § 2163.04 requires that “The examiner, therefore, must have a reasonable basis to challenge the adequacy of the written description. The examiner has the initial burden of presenting by a preponderance of evidence why a person skilled in the art would not recognize in an applicant’s disclosure a description of the invention defined by the claims” wherein “the examiner must set forth express findings of fact which support the lack of written description conclusion (see MPEP § 2163 for examination guidelines pertaining to the written description requirement)”.
Within MPEP § 2163, section (I)(B), it states that “The proscription against the introduction of new matter in a patent application (35 U.S.C. 132 and 251 ) serves to prevent an applicant from adding information that goes beyond the subject matter originally filed… New or amended claims which introduce elements or limitations that are not supported by the as-filed disclosure violate the written description requirement… While there is no in haec verba requirement, newly added claims or claim limitations must be supported in the specification through express, implicit, or inherent disclosure.”
Furthermore, MPEP § 2161.01, section I, instructs that “Problems satisfying the written description requirement for original claims often occur when claim language is generic or functional, or both…For instance, generic claim language in the original disclosure does not satisfy the written description requirement if it fails to support the scope of the genus claimed… original claims may lack written description when the claims define the invention in functional language specifying a desired result but the specification does not sufficiently describe how the function is performed or the result is achieved. For software, this can occur when the algorithm or steps/procedure for performing the computer function are not explained at all or are not explained in sufficient detail (simply restating the function recited in the claim is not necessarily sufficient). In other words, the algorithm or steps/procedure taken to perform the function must be described with sufficient detail so that one of ordinary skill in the art would understand how the inventor intended the function to be performed.”
Claims 1-20 recite “obtain”/“obtaining” “for a first sub-area of the sub-areas and based on second geographic information data of the first sub-area and second crowd flow data of the first sub-area, a crowd flow motif in the first sub-area, wherein the crowd flow motif indicates a multi-point crowd motion pattern in the first sub-area, wherein the crowd flow motif comprises nodes and arrows, wherein the nodes have semantic labels of first key landmarks in the first sub-area, and wherein the arrows indicates crowd flow directions between the first key landmarks”.
However, the specification is silent with respect to any “arrows” either alone or in conjunction with these limitations. Therefore, it cannot be fairly said that the original disclosure contained this element either alone or within the limitations in the manner claimed and claims 1-20 are rejected for failure to comply with the written description requirement.
Double Patenting
The nonstatutory double patenting rejection is based on a judicially created doctrine grounded in public policy (a policy reflected in the statute) so as to prevent the unjustified or improper timewise extension of the “right to exclude” granted by a patent and to prevent possible harassment by multiple assignees. A nonstatutory double patenting rejection is appropriate where the conflicting claims are not identical, but at least one examined application claim is not patentably distinct from the reference claim(s) because the examined application claim is either anticipated by, or would have been obvious over, the reference claim(s). See, e.g., In re Berg, 140 F.3d 1428, 46 USPQ2d 1226 (Fed. Cir. 1998); In re Goodman, 11 F.3d 1046, 29 USPQ2d 2010 (Fed. Cir. 1993); In re Longi, 759 F.2d 887, 225 USPQ 645 (Fed. Cir. 1985); In re Van Ornum, 686 F.2d 937, 214 USPQ 761 (CCPA 1982); In re Vogel, 422 F.2d 438, 164 USPQ 619 (CCPA 1970); In re Thorington, 418 F.2d 528, 163 USPQ 644 (CCPA 1969).
A timely filed terminal disclaimer in compliance with 37 CFR 1.321(c) or 1.321(d) may be used to overcome an actual or provisional rejection based on nonstatutory double patenting provided the reference application or patent either is shown to be commonly owned with the examined application, or claims an invention made as a result of activities undertaken within the scope of a joint research agreement. See MPEP § 717.02 for applications subject to examination under the first inventor to file provisions of the AIA as explained in MPEP § 2159. See MPEP § 2146 et seq. for applications not subject to examination under the first inventor to file provisions of the AIA . A terminal disclaimer must be signed in compliance with 37 CFR 1.321(b).
The filing of a terminal disclaimer by itself is not a complete reply to a nonstatutory double patenting (NSDP) rejection. A complete reply requires that the terminal disclaimer be accompanied by a reply requesting reconsideration of the prior Office action. Even where the NSDP rejection is provisional the reply must be complete. See MPEP § 804, subsection I.B.1. For a reply to a non-final Office action, see 37 CFR 1.111(a). For a reply to final Office action, see 37 CFR 1.113(c). A request for reconsideration while not provided for in 37 CFR 1.113(c) may be filed after final for consideration. See MPEP §§ 706.07(e) and 714.13.
The USPTO Internet website contains terminal disclaimer forms which may be used. Please visit www.uspto.gov/patent/patents-forms. The actual filing date of the application in which the form is filed determines what form (e.g., PTO/SB/25, PTO/SB/26, PTO/AIA /25, or PTO/AIA /26) should be used. A web-based eTerminal Disclaimer may be filled out completely online using web-screens. An eTerminal Disclaimer that meets all requirements is auto-processed and approved immediately upon submission. For more information about eTerminal Disclaimers, refer to www.uspto.gov/patents/apply/applying-online/eterminal-disclaimer.
Claims 1-20 are rejected on the ground of nonstatutory double patenting as being unpatentable over claims 1-17 of U.S. Patent No. 12381788 B2 to Zhou et al. Although the claims at issue are not identical, they are not patentably distinct from each other because claims 1-20 are found to be anticipated by the recitations of claims 1, 2, 1, 3-9, 8, 10-16, 15, and 17 respectively of Zhou, therefore, claims 1-20 are rejected on the ground of nonstatutory double patenting.
Conclusion
An updated search did not reveal additional prior art that is relevant to the claimed invention or to the broader disclosure than of what is already of record within the prosecution history of the instant application including its parent.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to G. C. Neurauter, Jr. whose telephone number is (571)272-3918. The examiner can normally be reached Monday-Friday 9am-5pm Eastern Time.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Tonia Dollinger, can be reached at 571-272-4170. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/G. C. Neurauter, Jr./Primary Examiner, Art Unit 2459
