Prosecution Insights
Last updated: November 20, 2026
Application No. 19/313,245

FINGERPRINT RECOGNITION MODULE, DISPLAY APPARATUS, AND ELECTRONIC DEVICE

Non-Final OA §112
Filed
Aug 28, 2025
Priority
Mar 01, 2023 — CN 202310237702.0 +1 more
Examiner
XAVIER, ANTONIO J
Art Unit
2622
Tech Center
2600 — Communications
Assignee
Huawei Technologies Co., Ltd.
OA Round
1 (Non-Final)
71%
Grant Probability
Favorable
1-2
OA Rounds
1y 6m
Est. Remaining
89%
With Interview

Examiner Intelligence

Grants 71% — above average
71%
Career Allowance Rate
428 granted / 601 resolved
+9.2% vs TC avg
Strong +18% interview lift
Without
With
+18.1%
Interview Lift
resolved cases with interview
Typical timeline
2y 9m
Avg Prosecution
7 currently pending
Career history
610
Total Applications
across all art units

Statute-Specific Performance

§101
3.1%
-36.9% vs TC avg
§103
55.1%
+15.1% vs TC avg
§102
14.5%
-25.5% vs TC avg
§112
18.8%
-21.2% vs TC avg
Black line = Tech Center average estimate • Based on career data from 601 resolved cases

Office Action

§112
DETAILED ACTION The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . In the event the determination of the status of the application as subject to AIA 35 U.S.C. 102 and 103 (or as subject to pre-AIA 35 U.S.C. 102 and 103) is incorrect, any correction of the statutory basis for the rejection will not be considered a new ground of rejection if the prior art relied upon, and the rationale supporting the rejection, would be the same under either status. Election/Restrictions Applicant’s election without traverse of Species I (Claims 1-18) in the reply filed on September 14, 2026 is acknowledged. Claims 1-18 will be examined on the merits Claims 20 and 21 are hereby withdrawn Misc. Examiner forgot to acknowledge the preliminary amendment dated October 30, 2025 in the prior action. An annotated copy has been included in this Office Action. For clarity of the record, Examiner confirms that the restriction mailed on July 14, 2026 was based on the amended claim set dated October 30, 2025. Drawings The drawings are objected to under 37 CFR 1.83(a). The drawings must show every feature of the invention specified in the claims. Therefore, the “circuit unit” (claims 1 and 16 – emphasis added) and first/second “piezoelectric unit” (claims 5 and 7 – emphasis added) (see rejection below under 35 U.S.C. §112 for further details) must be shown or the feature(s) canceled from the claim(s). No new matter should be entered. Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance. Claim Interpretation The following is a quotation of 35 U.S.C. 112(f): (f) Element in Claim for a Combination. – An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. The following is a quotation of pre-AIA 35 U.S.C. 112, sixth paragraph: An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. This application includes one or more claim limitations that do not use the word “means,” but are nonetheless being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, because the claim limitation(s) uses a generic placeholder that is coupled with functional language without reciting sufficient structure to perform the recited function and the generic placeholder is not preceded by a structural modifier. Such claim limitation(s) is/are: “circuit unit” (claims 1 and 16 – emphasis added) and first/second “piezoelectric unit” (claims 5 and 7 – emphasis added). Because this/these claim limitation(s) is/are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, it/they is/are being interpreted to cover the corresponding structure described in the specification as performing the claimed function, and equivalents thereof. If applicant does not intend to have this/these limitation(s) interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, applicant may: (1) amend the claim limitation(s) to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph (e.g., by reciting sufficient structure to perform the claimed function); or (2) present a sufficient showing that the claim limitation(s) recite(s) sufficient structure to perform the claimed function so as to avoid it/them being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. Examiner notes the specification as filed appears to lack any further disclosure regarding possible structure for a circuit unit or a first/second piezoelectric unit. In the interest of compact prosecution, Examiner notes the term "electrode unit" does not invoke 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph because structure, in the form of an electrode, is recited to perform the function. Claim Rejections - 35 USC § 112 The following is a quotation of the first paragraph of 35 U.S.C. 112(a): (a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention. The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112: The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention. Claims 1-18 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for pre-AIA the inventor(s), at the time the application was filed, had possession of the claimed invention. As discussed above, Examiner notes there does not appear to be any sufficient disclosure to support the means plus function recitation of a “circuit unit” (claims 1 and 16 – emphasis added) and a first/second “piezoelectric unit” (claims 5 and 7 – emphasis added). Claims 2-15 and 17-18 are dependent on claims 1 and 16, respectively, and rejected for substantially the same reasons, discussed above. The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 1-18 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, or for pre-AIA the applicant regards as the invention. As discussed above, Examiner notes there does not appear to be any sufficient disclosure to support the means plus function recitation of a “circuit unit” (claims 1 and 16 – emphasis added) and a first/second “piezoelectric unit” (claims 5 and 7 – emphasis added). Per MPEP 2181(II): "35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph states that a claim limitation expressed in means- (or step-) plus-function language “shall be construed to cover the corresponding structure…described in the specification and equivalents thereof.” “If one employs means plus function language in a claim, one must set forth in the specification an adequate disclosure showing what is meant by that language. If an applicant fails to set forth an adequate disclosure, the applicant has in effect failed to particularly point out and distinctly claim the invention as required by the 35 U.S.C. 112(b) [or the second paragraph of pre-AIA section 112 ].” In re Donaldson Co., 16 F.3d 1189, 1195, 29 USPQ2d 1845, 1850 (Fed. Cir. 1994) (en banc)" (emphasis added). Claims 2-15 and 17-18 are dependent on claims 1 and 16, respectively, and rejected for substantially the same reasons, discussed above. Pertinent Art The prior art made of record and not relied upon is considered pertinent to Applicant's disclosure: Paragraph [0053] of Chen (USPN 2022/0269347) and paragraph [0058] of Liang et al. (USPN 2021/0408168) teach a piezoelectric unit; and Paragraph [0083] of Toyoshima et al. (USPN 2002/0196036), paragraph [0146] of Hong et al. (USPN 2020/0050815), paragraph [0517] and [0518] of Katagiri et al. (USPN 2023/0004207) and Park et al. (USPN 2021/0004097) teach a circuit unit. Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to ANTONIO J XAVIER whose telephone number is (571)270-7688. The examiner can normally be reached on M-F 830am-5pm PST. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, PATRICK EDOUARD can be reached on 571-272-7603. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of an application may be obtained from the Patent Application Information Retrieval (PAIR) system. Status information for published applications may be obtained from either Private PAIR or Public PAIR. Status information for unpublished applications is available through Private PAIR only. For more information about the PAIR system, see http://pair-direct.uspto.gov. Should you have questions on access to the Private PAIR system, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative or access to the automated information system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /ANTONIO XAVIER/ Primary Examiner, Art Unit 2622
Read full office action

Prosecution Timeline

Aug 28, 2025
Application Filed
Oct 30, 2025
Response after Non-Final Action
Oct 20, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12784643
DATA DRIVER AND DISPLAY DEVICE INCLUDING THE SAME
1y 4m to grant Granted Nov 03, 2026
Patent 12784490
Ultrasonic Sensor and Operating Method Thereof, and Electronic Device
1y 2m to grant Granted Nov 03, 2026
Patent 12776285
LOCAL DIMMING ON VIDEO WALLS
2y 4m to grant Granted Oct 27, 2026
Patent 12776279
SCAN CIRCUIT, DISPLAY APPARATUS, AND METHOD OF OPERATING SCAN CIRCUIT
1y 5m to grant Granted Oct 27, 2026
Patent 12762888
FINGER FEATURE MODULE
1y 7m to grant Granted Oct 13, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
71%
Grant Probability
89%
With Interview (+18.1%)
2y 9m (~1y 6m remaining)
Median Time to Grant
Low
PTA Risk
Based on 601 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month