Prosecution Insights
Last updated: November 08, 2026
Application No. 19/491,549

SYSTEM TO MINIMIZE SLOSHING IN TANKER TRUCKS

Non-Final OA §112
Filed
Dec 09, 2025
Priority
Jun 09, 2023 — provisional 63/472,080 +1 more
Examiner
BALDRIGHI, ERIC C
Art Unit
3733
Tech Center
3700 — Mechanical Engineering & Manufacturing
Assignee
Flexsys Inc.
OA Round
1 (Non-Final)
42%
Grant Probability
Moderate
1-2
OA Rounds
1y 9m
Est. Remaining
82%
With Interview

Examiner Intelligence

Grants 42% of resolved cases
42%
Career Allowance Rate
91 granted / 216 resolved
-27.9% vs TC avg
Strong +40% interview lift
Without
With
+40.2%
Interview Lift
resolved cases with interview
Typical timeline
2y 8m
Avg Prosecution
38 currently pending
Career history
264
Total Applications
across all art units

Statute-Specific Performance

§101
0.3%
-39.7% vs TC avg
§103
51.7%
+11.7% vs TC avg
§102
26.7%
-13.3% vs TC avg
§112
20.5%
-19.5% vs TC avg
Black line = Tech Center average estimate • Based on career data from 216 resolved cases

Office Action

§112
DETAILED ACTION The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Claim Objections Claims 5, 11-12 and 16 are objected to because of the following informalities. Appropriate correction is required. Regarding claim 5, lines 2-3 “whereby the first and second panels to bend… towards each other when the actuator tensions the first band” is unclear on order of operation. The “panels to bend” is missing a verb such as “panels are configured to bend” or “panels are caused to bend” or “panels are to bend”. Regarding claim 11, line 3 “seal that sliding seals” should read “seal that slidingly seals”. Regarding claim 12, last line “rails.” should read “rails, respectively.”. Regarding claim 16, line 4 “bands,” should read “bands, respectively,”. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. Claims 2-10, 12-16 and 18-20 are rejected under 35 U.S.C. 112(b) as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor regards as the invention. Regarding claim 2, line 3 “the respective panel” lacks antecedent basis. Which panel? Regarding claim 5, line 1 “a first band” is unclear whether it is the “band” from parent claim 2 or another/different band than that. Since there are at least three bands (see dependent claim 6), a POSITA would not be able to discern what “first band” is in addition to the “band”, thereby rendering the claim indefinite. Regarding claim 16 also “a first band” issue as above. Regarding claim 19, page 20 line 1 “the tank interior” lacks antecedent basis. Regarding claim 19, last line “the tank interior” conflicts with “the tank volume”. Are they the same or different? Claims 3-10, 12-16, 18 and 20 are also rejected for depending upon a rejected parent claim. Allowable Subject Matter Claims 1, 11 and 17 are allowed. Claims 2-10, 12-16 and 18-20 would be allowable if the 35 USC 112 rejections were resolved, and the objections. The following is an examiner’s statement of reasons for allowance: Claims 1 and 19: The limitation “a panel system disposed within the tank interior and having a first panel attached to the first side wall and a second panel attached to the second sidewall, the first panel and second panel each operable between a fully open configuration where the first and second panels extend along and adjacent to the first and second side walls, respectively, and a fully closed configuration where the first and second panels have moved towards the bottom wall and overlap each other to define an effective volume between the first and second panels and the bottom wall, the effective volume being less than the tank volume” is allowable. No references were found to anticipate or make obvious the claimed addition of a panel system comprising two panels to a tank interior that are operable between fully open/closed, and overlap when closed, to define an effective volume less than the tank volume of the whole interior. The closest reference (US Pat 4775070 attached, see PTO-892) actuates to tilt a single panel (Fig 1). Many references in the field have static baffles or fluid-responsive passive-acting baffles/panels. A few more have single panel actuation. Any comments considered necessary by applicant must be submitted no later than the payment of the issue fee and, to avoid processing delays, should preferably accompany the issue fee. Such submissions should be clearly labeled “Comments on Statement of Reasons for Allowance.” Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to ERIC C BALDRIGHI whose telephone number is (571)272-4948. The examiner can normally be reached M-F 7:30-5:00 EST. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Nathan Jenness can be reached on 5712705055. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /ERIC C BALDRIGHI/Examiner, Art Unit 3733
Read full office action

Prosecution Timeline

Dec 09, 2025
Application Filed
Oct 20, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12752969
BAG ROLL CASSETTE AND METHOD OF USE
4y 7m to grant Granted Oct 06, 2026
Patent 12747076
CLOSURE WITH RETAINING RING AND TAMPER EVIDENCE BAND
2y 11m to grant Granted Sep 29, 2026
Patent 12715662
CONTAINER HAVING METAL LID AND BOTTOM CONNECTED WITH PLASTIC CONNECTION RING
2y 6m to grant Granted Aug 25, 2026
Patent 12715649
Novel Packaging Box and Production Process Thereof
2y 2m to grant Granted Aug 25, 2026
Patent 12703543
Retainable Closure
2y 7m to grant Granted Aug 11, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
42%
Grant Probability
82%
With Interview (+40.2%)
2y 8m (~1y 9m remaining)
Median Time to Grant
Low
PTA Risk
Based on 216 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month