DETAILED ACTION
The preliminary amendment filed 12/19/2025 has been entered.
Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Drawings
The drawings are objected to under 37 CFR 1.83(a). The drawings must show every feature of the invention specified in the claims. Therefore, the aperture of the boltless segment (as in claim 8) and the hinge connection (of claim 9) must be shown or the feature(s) canceled from the claim(s). No new matter should be entered.
Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
The drawings are also objected to as failing to comply with 37 CFR 1.84(p)(5) because they do not include the following reference sign(s) mentioned in the description: 42’ (as in paragraph 38). Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance.
Claim Interpretation
The following is a quotation of 35 U.S.C. 112(f):
(f) Element in Claim for a Combination. – An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.
The following is a quotation of pre-AIA 35 U.S.C. 112, sixth paragraph:
An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.
The claims in this application are given their broadest reasonable interpretation using the plain meaning of the claim language in light of the specification as it would be understood by one of ordinary skill in the art. The broadest reasonable interpretation of a claim element (also commonly referred to as a claim limitation) is limited by the description in the specification when 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is invoked.
As explained in MPEP § 2181, subsection I, claim limitations that meet the following three-prong test will be interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph:
(A) the claim limitation uses the term “means” or “step” or a term used as a substitute for “means” that is a generic placeholder (also called a nonce term or a non-structural term having no specific structural meaning) for performing the claimed function;
(B) the term “means” or “step” or the generic placeholder is modified by functional language, typically, but not always linked by the transition word “for” (e.g., “means for”) or another linking word or phrase, such as “configured to” or “so that”; and
(C) the term “means” or “step” or the generic placeholder is not modified by sufficient structure, material, or acts for performing the claimed function.
Use of the word “means” (or “step”) in a claim with functional language creates a rebuttable presumption that the claim limitation is to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites sufficient structure, material, or acts to entirely perform the recited function.
Absence of the word “means” (or “step”) in a claim creates a rebuttable presumption that the claim limitation is not to be treated in accordance with 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph. The presumption that the claim limitation is not interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, is rebutted when the claim limitation recites function without reciting sufficient structure, material or acts to entirely perform the recited function.
Claim limitations in this application that use the word “means” (or “step”) are being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action. Conversely, claim limitations in this application that do not use the word “means” (or “step”) are not being interpreted under 35 U.S.C. 112(f) or pre-AIA 35 U.S.C. 112, sixth paragraph, except as otherwise indicated in an Office action.
Specifically, in claim 11, the “securing means” which provides the function of “securing said boltless segment retainer onto said top edge of said housing” has been interpreted as in paragraph 42 as including but not limited to bolts and screws.
Claim Rejections - 35 USC § 112
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1-12 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention.
Claim 1 lacks antecedent basis for “the drilling riser” in line 9 and is therefore indefinite. Claim 1 is also indefinite as reciting “a channel” in line 11, which appears to be the same channel referred to in line 4 and therefore the second recitation should recite “the” or “said” channel.
Claim 2 lacks antecedent basis for “the drilling riser” in line 10 and is therefore indefinite. Claim 1 is also indefinite as reciting “a channel” in line 13, which appears to be the same channel referred to in line 5 and therefore the second recitation should recite “the” or “said” channel.
Claim 3 lacks antecedent basis for “the sealing element” and is therefore indefinite.
Claim 3 is also indefinite as reciting that “the sealing element” is secured to “an adapter” which abuts against said bottom surface of said at least one boltless segment since the “adapter” as disclosed in the specification is labeled as 18 which is not disclosed otherwise as abutting against the adapter as claimed, see figures 2 and 4, for example where adapter 18 is never shown as abutting the segment.
Claim 4 lacks antecedent basis for “the sealing element” and is therefore indefinite.
Claim 4 is also indefinite as reciting “the sealing element” is incorporated into the direct design of the sealing assembly and securement member, where it is not clear what this limitation requires as any sealing element as a portion of a sealing assembly would appear to fulfill this limitation.
Claim 6 lacks antecedent basis for “the elastomeric element”, and “its adapter” is is therefore indefinite. Claim 6 is also indefinite as reciting that the housing “allows for a tapered seal without the use of threads or axial forces that reduce the force necessary to install and remove the sealing assembly from the housing” where it is not clear how one of ordinary skill would evaluate “that reduce the force necessary to install and remove the sealing assembly from the housing”.
Claim 7 lacks antecedent basis for “the groove” and “the base” in line 4. Claim 7 is further indefinite as reciting “from the group consisting of” where the second option of the group, i.e. “a geometry where the retaining wall’s geometry can help prevent..” appears to require the first group as introducing “a retaining wall”. Claim 7 is still further indefinite as reciting “allows for confident securement..” where it is not clear how one of ordinary skill would evaluate this limitation as fulfilled or not.
Claim 11 lacks antecedent basis for “the opening” in line 5 and is therefore indefinite. Claim 11 is further indefinite as reciting “wherein at least one boltless segment” in line 10 which should apparently refer to the previously recited boltless segments. Claim 11 is still further indefinite as reciting “a channel located within a circular housing…” should also apparently refer to the previously recited “channel” and “housing”.
Claim 12 is indefinite as reciting “A kit for use with a rotating control device according to claim 1, said kit comprising:” where this “kit” repeats the limitations of claim 1 which is “the rotating control device” and therefore this claim is indefinite as it appears to require multiple of each of the housing, sealing assembly etc.
Claim 12 is further indefinite as lacking antecedent basis for “the drilling riser” in line 9, “the groove” and “the base” in line 22.
Claim 12 is further indefinite as reciting “from the group consisting of” where the second option of the group, i.e. “a geometry where the retaining wall’s geometry can help prevent..” appears to require the first group as introducing “a retaining wall”.
Claim 12 is still further indefinite as reciting “allows for confident securement of the sealing assembly without the direct use of bolts or fasteners through the sealing assembly or housing into any other component” where it is not clear how one of ordinary skill would evaluate the securement as “confident” and also it is not clear that no “fasteners” are through the housing into any other component since fasteners 21 appear to be through the retainer (i.e. any other component) and the housing (i.e. as in fig 54 where fasteners 21 are should as through 50 and would be secured within 20).
Claim 12 is also indefinite as reciting “a channel” in line 12, which appears to be the same channel referred to in line 4 and therefore the second recitation should recite “the” or “said” channel.
The remaining claims are indefinite as being dependent from an indefinite claim.
Claim Rejections - 35 USC § 102
The following is a quotation of the appropriate paragraphs of 35 U.S.C. 102 that form the basis for the rejections under this section made in this Office action:
A person shall be entitled to a patent unless –
(a)(1) the claimed invention was patented, described in a printed publication, or in public use, on sale, or otherwise available to the public before the effective filing date of the claimed invention.
Claim(s) 11 is/are rejected under 35 U.S.C. 102a1 as being anticipated by Hughes (US 2015/0376970).
In regard to claim 11, Hughes discloses a method of securing a retaining a sealing element (34 as in fig 25-26) used in a rotating control device used in managed pressure drilling within a housing (30), said method comprising the steps: inserting a sealing assembly adapted to be securely and removably inserted within said opening of said housing (as in figs 25 and 26) and defining an aperture sized for the insertion of a drillstring therethrough (74 fig 25); positioning the sealing assembly within the housing to form a seal from a lower portion situated below a channel (150) located on an inner surface of said housing; inserting at least one boltless segment (148) into said channel located on said housing, wherein at least one boltless segment comprising an outer surface, an inner surface and a top surface and a bottom surface (as in figs 25 and 26 as shown); wherein each one of said at least one boltless segment comprising a curved shape adapted to fit within a channel located within a circular housing and abut against an outer surface of said channel (as in figs 25 and 26); inserting a boltless segment retainer (156) onto or into a top edge of said housing (as in figs 25 and 26); and securing said boltless segment retainer onto said top edge of said housing with securing means (136, as assembled other components as in fig 25 and 26).
Allowable Subject Matter
Claims 1-10 and 12 appear to would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action.
The following is a statement of reasons for the indication of allowable subject matter: The prior art of record includes various means for attaching a sealing assembly to a rotating control device for managed pressure drilling, such as Hughes (applied above), Tran (US 11,686,173), Riggs (US 8,991,484), and Bearden et al. (US 4,745,970). However, the prior art of the record does not fairly teach or suggest a rotating control device for managed pressure drilling including a boltless sealing assembly securement system comprising: at least one boltless segment adapted for insertion into a channel located on a housing, each one of said at least one boltless segment comprising a shape adapted to fit within said channel and having an outer surface, an inner surface and a top surface and a bottom surface; said outer surface adapted to abut against the side wall of said channel and said lower surface adapted to abut against the lower edge of said channel and said top surface adapted to abut against the upper edge of said channel; and a boltless segment retainer comprising a top surface adapted for securing on a top edge of the housing and a lower edge adapted for insertion within the housing aperture and abutment against the inner surface of said at least one boltless segment, as specifically recited in each of claims 1, 2 and 12.
Conclusion
Any inquiry concerning this communication or earlier communications from the examiner should be directed to D Andrews whose telephone number is (571)272-6558. The examiner can normally be reached M-F, 7-3.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Nicole Coy can be reached at 571-272-5405. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/D. ANDREWS/Primary Examiner, Art Unit 3672
10/20/2026