Prosecution Insights
Last updated: November 20, 2026
Application No. 29/865,331

Backpack

Non-Final OA §112
Filed
Jul 20, 2022
Priority
Jan 25, 2022 — continuation of D1013367
Examiner
GRIFFITH, DUSTIN ANDREW
Art Unit
2913
Tech Center
2900
Assignee
Upper Echelon Products LLC
OA Round
4 (Non-Final)
98%
Grant Probability
Favorable
4-5
OA Rounds
0m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 98% — above average
98%
Career Allowance Rate
165 granted / 168 resolved
+38.2% vs TC avg
Minimal +2% lift
Without
With
+2.2%
Interview Lift
resolved cases with interview
Fast prosecutor
1y 8m
Avg Prosecution
10 currently pending
Career history
177
Total Applications
across all art units

Statute-Specific Performance

§103
6.2%
-33.8% vs TC avg
§102
25.2%
-14.8% vs TC avg
§112
63.7%
+23.7% vs TC avg
Black line = Tech Center average estimate • Based on career data from 168 resolved cases

Office Action

§112
Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Reconsideration The merits of this case have been carefully examined again in light of applicant's response received 4/5/2026. The rejection of record under 35 USC 112 (a) & (b) has not been overcome. However, after further examination, additional grounds for rejection were found under 35 USC 112 (a) and (b). A NON-FINAL rejection on the merits appears below. Claim rejections The claim is rejected under 35 U.S.C. 112(a) and (b) or 35 U.S.C. 112 (pre-AIA ), first and second paragraphs, as the claimed invention is not described in such full, clear, concise and exact terms as to enable any person skilled in the art to make and use the same, and fails to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or, for applications subject to pre-AIA 35 U.S.C. 112, the applicant) regards as the invention. The claim is indefinite and non-enabling because there are inconsistencies between the views of the drawings that are so great that the overall appearance of the design is unclear (MPEP § 1504.04), specifically: It is to be noted that the following annotations primarily show the backpack without the right and left covers deployed. However, any rejection applying to the ones without the deployed covers will also effect any views with the covers shown deployed as the views are similar. All views need to be corrected and consistent. Figs. 5 and 9 show a zipper pull that appears inside of the front pocket. How far inside is this zipper pull? What does this zipper pull appear like from the front? Only the side of the zipper pull is visible. Additionally, how far recessed is the opening for this zipper pull? One way the applicant may overcome this rejection is by converting these interior segments and the interior zipper pull into broken lines and adding a broken line statement to the specification describing the broken lines as not part of the claimed design. See the annotation of Fig. 5 as an example below. Please note: that while not shown, Fig. 9 shares the same issues as Fig. 5. PNG media_image1.png 893 822 media_image1.png Greyscale The nature of the opening for the zipper seam shown on the front of the front of the bag is confusing and open to conjecture. Fig. 5 shows a pocket open with a recessed zipper pull hiding a pocket. Judging from how the strap portion is raised in Fig. 5 to show this zipper seam and zipper pulls thickness, this raised portion should be visible in Figs. 1, 2, 7, 8, 11, and 14. See the annotation of Figs. 1, 2, 5, and 7 below. Please note: that while Figs. 8, 11, and 14 are not shown, they share the same issues as Figs. 1, 2, and 7. PNG media_image2.png 876 974 media_image2.png Greyscale PNG media_image3.png 737 932 media_image3.png Greyscale PNG media_image4.png 889 951 media_image4.png Greyscale If replacement drawings are submitted Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. If all the figures on a drawing sheet are canceled, a replacement sheet is not required. A marked-up copy of the drawing sheet (labeled as “Annotated Sheet”) including an annotation showing that all the figures on that drawing sheet have been canceled must be presented in the amendment or remarks section that explains the change to the drawings. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. Caution against new matter When preparing new or replacement drawings, be careful to avoid introducing new matter. New matter is prohibited by 35 U.S.C. 132 and 37 CFR 1.121(f). Reply to remarks Applicant’s remarks submitted 4/5/2026 have been duly noted. Applicant argues the rejection for the zippered pocket under the flap on the front pocket is improper because design patents are directed to the ornamental design of an article of manufacture and that separate views depict this pocket from a certain perspective. Additionally, the applicant argues that knowing how far recessed a pocket may be or what does this zipper pull appear like is irrelevant because a POSITA can look at the figures and determine what those metes and bounds are. Still further, that the nature of this pocket has no confusion because the zipper is clearly oriented in a position indicating that the pocket is closed. Applicant’s arguments are not found to be convincing because while the examiner agrees the pocket is shown in a closed position, that does not solve the confusion of the pocket and it’s appearance. Where does this closed pocket begin? How far inside of the strap is the pocket recessed? Is the strap on the front merely ornamental and the pocket underneath said strap extends below both of the front ornamental straps? If this is the case, where does the actual zipper seam appear and where does it begin and end? With just a side view alone it cannot be determined how deep this zipper seam is within the open strap. None of these can be answered by just looking at the zipper pull from the side view without the aid of a cross-sectional view. Conclusion Accordingly the claim is rejected under 35 U.S.C. 112 (a) and (b). Contact information Any inquiry concerning this communication or earlier communications from the examiner should be directed to DUSTIN GRIFFITH whose telephone number is (571)272-1797. The examiner can normally be reached on Monday-Thursday 10:00am – 7:00pm & Friday 1:00PM – 6:00PM EST. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Ian Simmons can be reached on (571)-272-2658. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). For assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /D.A.G./Examiner, Art Unit 2913 /GEORGE J ULSH/Supervisory Patent Examiner, Art Unit 2922
Read full office action

Prosecution Timeline

Show 1 earlier event
Dec 10, 2025
Non-Final Rejection mailed — §112
Apr 05, 2026
Response Filed
Jul 01, 2026
Final Rejection mailed — §112
Jul 13, 2026
Notice of Allowance
Jul 13, 2026
Response after Non-Final Action
Aug 04, 2026
Response after Non-Final Action
Aug 11, 2026
Final Rejection (signed) — §112
Sep 14, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent D1152439
Phone case for diving
1y 4m to grant Granted Oct 13, 2026
Patent D1138150
Shoulder bag
1y 7m to grant Granted Aug 04, 2026
Patent D1133485
Bag
2y 1m to grant Granted Jul 14, 2026
Patent D1131005
Backpack
2y 2m to grant Granted Jun 23, 2026
Patent D1120611
Rucksack
1y 5m to grant Granted Mar 31, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

4-5
Expected OA Rounds
98%
Grant Probability
99%
With Interview (+2.2%)
1y 8m (~0m remaining)
Median Time to Grant
High
PTA Risk
Based on 168 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month