Prosecution Insights
Last updated: November 04, 2026
Application No. 35/523,990

Pizza saver for packaging foodstuffs

Final Rejection §112
Filed
Dec 19, 2024
Priority
Dec 03, 2024 — GB 6408915
Examiner
DIEHL, JOAN ELIZABETH
Art Unit
2923
Tech Center
2900
Assignee
B-Loony Holdings Limited
OA Round
1 (Final)
92%
Grant Probability
Favorable
2-3
OA Rounds
1m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 92% — above average
92%
Career Allowance Rate
144 granted / 156 resolved
+32.3% vs TC avg
Moderate +10% lift
Without
With
+9.6%
Interview Lift
resolved cases with interview
Fast prosecutor
2y 0m
Avg Prosecution
16 currently pending
Career history
163
Total Applications
across all art units

Statute-Specific Performance

§103
2.9%
-37.1% vs TC avg
§102
4.6%
-35.4% vs TC avg
§112
70.5%
+30.5% vs TC avg
Black line = Tech Center average estimate • Based on career data from 156 resolved cases

Office Action

§112
Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . Acknowledgement of Amendment Acknowledgement is here made of applicant’s amendments of 01/17/2026 wherein amendments have been made to the reproductions and specification. The amendments to the specification in the A.I. file entry are deemed sufficient. However, the Quayle Action dated on 11/19/2025 has not been fully resolved. Therefore, the indication of allowability set forth in the previous action is withdrawn and prosecution is reopened in view of the following new grounds of rejection. The merits of the application have been fully reconsidered in view of applicant’s amendments. Examiner’s Comment The specification has been amended in the A.I. file dated 01/17/2026. Although this is the incorrect coding for a specification amendment, it is Examiner’s understanding that the figure descriptions and descriptive statements are amended as follows: --1.1: Unfolded perspective-- --1.2: Folded perspective-- --The pizza saver for packaging foodstuffs is a design used to protect pizza slices in the pizza box and to allow proper storage thereof. -- --Claim: The ornamental design for a pizza saver for packaging foodstuffs as shown and described. -- Objection – Foreign Priority Acknowledgment is made of applicant’s claim for foreign priority based on an application filed in Great Britain on 12/3/2024. And it is acknowledged that applicant has provided a new Application Data Sheet (ADS), however, the foreign priority document referenced on the new ADS is not the GB number listed and is now listed as DM/243908 with no access code (the access code is a 4-character combination of letters and numbers). The USPTO will not be able to retrieve the priority application because the country code and access code are incorrect and/or missing. Applicant must provide a proper WIPO DAS Access Code on the ADS and amend the country code to “GB” to match the priority application’s country of origin. In addition, the document included that references this DM243908 application is coded as a foreign reference dated 01/17/2026. This is not a certified priority document of the application as it is the international registration certificate, not a certified copy of the application. In the case of a design application, the certified copy of the application must be filed during the pendency of the application, unless filed with a petition under 37 CFR 1.55(g) together with the fee set forth in 37 CFR 1.17(g), that includes a showing of good and sufficient cause for the delay in filing the certified copy of the foreign application. If the certified copy of the foreign application is filed after the date the issue fee is paid, the patent will not include the priority claim unless corrected by a certificate of correction under 35 U.S.C. 255 and 37 CFR 1.323. Objection - Drawings The figure labeled “1.2a” is an inappropriate label for a figure in a Hague application. Figure numbering requirements for international design applications are different from figure numbering requirements for design applications filed under 35 U.S.C. chapter 16. Pursuant to Administrative Instruction 405, "[w]hen the same industrial design is represented from different angles, the numbering shall consist of two separate figures separated by a dot (e.g., 1.1, 1.2, 1.3, etc. for the first design, 2.1, 2.2, 2.3, etc. for the second design, and so on)." The figure numbering appearing in the published international registration should be preserved during prosecution of the nonprovisional international design application before the USPTO. Therefore reproductions must be numbered clearly so that they read “1.1, 1.2”. See 37 CFR 1.1026. Replacement Reproductions Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. If all the figures on a drawing sheet are canceled, a replacement sheet is not required. A marked-up copy of the drawing sheet (labeled as “Annotated Sheet”) including an annotation showing that all the figures on that drawing sheet have been canceled must be presented in the amendment or the remarks section that explains the change to the drawings. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121 (d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. When preparing new or replacement drawings, be careful to avoid introducing new matter, 35 U.S.C. 132 and 37 CFR 1.121(f). This pertains to either: the addition to, or the removal of, any elements shown in the originally disclosed design. Claim Rejection - 35 U.S.C. § 112(a) - FINAL The claim is FINALLY REJECTED under 35 U.S.C. 112(a) as failing to comply with the description requirement. The original disclosure does not reasonably convey to a designer of ordinary skill in the art that applicant was in possession of the design now claimed at the time the application was filed. See In re Daniels, 144 F.3d 1452, 46 USPQ2d 1788 (Fed. Cir. 1998); In re Rasmussen, 650 F.2d 1212, 211 USPQ 323 (CCPA 1981). Specifically, there is no support in the original disclosure dated 02/14/2025 for the addition of the new reproduction view, labeled 1.2a and the addition of new matter. The additional figure added is unnecessary and the amendments made to 1.2 and 1.2a incorporate new matter with solid line features not disclosed in the original drawings. The current showing of the claimed design has no antecedent basis in the original disclosure and therefore constitutes impermissible new matter. After further consideration, the original views are deemed sufficient because the folded version is showing the plain solid sides seen in the unfolded version (labeled A and B, below). It is understood then that the short tab on the left end of the original 1.1 and the flap on the right end are not visible from the angle shown in the original 1.2 because they would be on the back side that is not visible in the drawings (labeled C below). Highlights of these areas are shown below for reference. PNG media_image1.png 1268 856 media_image1.png Greyscale To overcome this rejection, applicant may either convincingly demonstrate that the original disclosure establishes that he or she was in possession of the amended claim or re-submit the original drawings with correct and appropriate figure labeled, shown as 1.1 and 1.2. See MPEP 1504.04(B) and 37 C.F.R. 1.152. Discussion of the Merits of the Application All discussions between the applicant and the examiner regarding the merits of a pending application will be considered an interview and are to be made of record. See MPEP § 713. The examiner will not discuss the merits of the application with applicant's representative if the representative is not registered to practice before the USPTO. Appointment as applicant’s representative before the International Bureau pursuant to Rule 3 of the Common Regulations under the Hague Agreement does NOT entitle such representative to represent the applicant before the USPTO. Furthermore, an applicant that is a juristic entity must be represented by a patent attorney or agent registered to practice before the USPTO. Additional information regarding interviews is set forth below. Telephonic or In-person Interviews A telephonic or in person interview may only be conducted with an attorney or agent registered to practice before the USPTO ("registered practitioner") or with a pro se applicant (an applicant who is the inventor and who is not represented by a registered practitioner). The registered practitioner may either be of record or not of record. To become "of record," a power of attorney (POA) in accordance with 37 CFR 1.32 must be filed in the application. Form PTO/AIA /80 "Power of Attorney to Prosecute Applications Before the USPTO," available at www.uspto.gov/ patent/forms/forms-patent-applications-filed-or-after-september-16-2012, may be used for this purpose. See MPEP § 402.02(a) for further information. Interviews may also be conducted with a registered practitioner not of record provided the registered practitioner can show authorization to conduct an interview by completing, signing and filing an "Applicant Initiated Interview Request Form" (PTOL-413A) (available at the USPTO web page indicated above). See MPEP § 405. For acceptable ways to submit forms to the USPTO, see "When Responding to Official USPTO Correspondence" below. If a pro se applicant or registered practitioner located outside of the United States wishes to communicate by telephone, it is suggested that such person email the examiner at joan.diehl@uspto.gov to arrange a time and date for the telephone interview. Please include proposed days and times for the proposed call. When proposing a day/time for the interview, please consider the examiner’s work schedule indicated in the last paragraph of this communication. The email should also be used to determine who will initiate the telephone call. Email Communications The merits of the application will not be discussed via email (or other electronic medium} unless appropriate authorization for internet communication is filed in the application. Form PTO/SB/439 “Authorization for Internet Communications in a Patent Application or Request to Withdraw Authorization for Internet Communications” may be used to provide such authorization and is available at the USPTO web page indicated above. The authorization may not be sent by email to the USPTO. For acceptable ways to submit the authorization form to the USPTO, see “When Responding to Official USPTO Correspondence” below. See MPEP 502.03 II for further information. When Responding to Official USPTO Correspondence When responding to official correspondence issued by the USPTO, including a notification of refusal, please note the following: The USPTO transacts business in writing. All replies must be signed in accordance with 37 CFR 1.33(b). Pursuant to 37 CFR 1.33(b}(3), a reply submitted on behalf of a juristic applicant must be signed by an attorney or agent registered to practice before the USPTO. Applicants may submit replies to Office actions only by: Online via the USPTO’s Patent Center: https://patentcenter.uspto.gov/#!/ Mail: Commissioner For Patents, P.O. Box 1450, Alexandria, VA, 22313-1450 Facsimile to the USPTO's Official Fax Number (571 -273-8300) Hand-carry to USPTO's Alexandria, Virginia Customer Service Window https://www.uspto.gov/patents/maintain/responding-office-actions Conclusion The claim stands rejected under 35 USC § 112(a). THIS ACTION IS MADE FINAL. Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any extension fee pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the mailing date of this final action. Contact Any inquiry concerning this communication or earlier communications from the examiner should be directed to JOAN E. DIEHL whose telephone number is (571)272-9788. The examiner can normally be reached Monday-Friday 8AM-5PM. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Wendy Arminio can be reached on (571) 270-0221. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /J.E.D./Examiner, Art Unit 2923 /WENDY L ARMINIO/Supervisory Patent Examiner, Art Unit 2923
Read full office action

Prosecution Timeline

Dec 19, 2024
Application Filed
Jan 17, 2026
Response after Non-Final Action
Jan 17, 2026
Response after Non-Final Action
Aug 18, 2026
Response after Non-Final Action
Oct 28, 2026
Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent D1138728
Packaging box
1y 4m to grant Granted Aug 04, 2026
Patent D1138729
Packaging box
1y 4m to grant Granted Aug 04, 2026
Patent D1133903
Container for pizza
1y 8m to grant Granted Jul 14, 2026
Patent D1132731
Container for pizza
2y 5m to grant Granted Jul 07, 2026
Patent D1131218
Pot packaging
2y 0m to grant Granted Jun 23, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

2-3
Expected OA Rounds
92%
Grant Probability
99%
With Interview (+9.6%)
2y 0m (~1m remaining)
Median Time to Grant
Low
PTA Risk
Based on 156 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month