Prosecution Insights
Last updated: November 04, 2026
Application No. 35/524,376

Shelving

Final Rejection §112
Filed
Mar 19, 2024
Priority
Sep 19, 2023 — GB 6312692
Examiner
DONNELLY, KELLEY A
Art Unit
2932
Tech Center
2900
Assignee
Craster Limited
OA Round
2 (Final)
95%
Grant Probability
Favorable
3-4
OA Rounds
0m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 95% — above average
95%
Career Allowance Rate
813 granted / 856 resolved
+35.0% vs TC avg
Moderate +5% lift
Without
With
+5.1%
Interview Lift
resolved cases with interview
Fast prosecutor
1y 7m
Avg Prosecution
7 currently pending
Career history
859
Total Applications
across all art units

Statute-Specific Performance

§101
0.2%
-39.8% vs TC avg
§103
4.8%
-35.2% vs TC avg
§102
2.7%
-37.3% vs TC avg
§112
79.7%
+39.7% vs TC avg
Black line = Tech Center average estimate • Based on career data from 856 resolved cases

Office Action

§112
FINAL REJECTION The amended drawings have been reviewed and entered. However, the amended drawings, when placed side by side to the originals, do not appear to contain any changes except for one. The EXAMINER has determined that the extra “lines” located below the third and fifth shelf are clear based on these two drawings and therefore this point of rejection has been withdrawn. The remaining objections and rejection have been outlined below and made final. SPECIFICATION CLAIM LANGUAGE The Examiner would like to note that the original Claim submitted on 3/21/20225 is in the proper form because there is never more than one claim in a design patent application, 37 CFR 1.153(a). OBJECTION TO THE DRAWINGS The drawings are finally objected to because the lines are of extremely poor quality. The lines are rough and jagged and create unacceptable areas of solid black. The drawings in a design patent application should be professional quality, ready to be published, using precise, smooth lines. Every line must be sharp and clean, separate and distinct, uniformly thick and well defined. All drawing lines must be strong enough and good enough quality to permit adequate reproduction. 37 CFR 1.84(l). This requirement applies to all lines, however fine, to shading, and to lines representing cut surfaces in sectional views. Lines and strokes of different thicknesses may be used in the same drawing where different thicknesses have a different meaning. [AltContent: textbox (The circles illustrate some of the areas that contain poor line quality including unacceptable areas of solid black portions that obscure details.)][AltContent: oval][AltContent: oval][AltContent: oval][AltContent: textbox ([img-media_image1.png])][AltContent: textbox (Fig. 1.1)]New formal drawings are required in this application. See below an annotated drawing of an enlarged section of Fig. 3 for more detailed information. However, this poor line quality is prevalent throughout all the figures. [AltContent: oval] When preparing new drawings in compliance with the requirement therefor, care must be exercised to avoid introduction of anything which could be construed to be new matter prohibited by 35 U.S.C. 132 and 37 CFR 1.121. A complete set of corrected drawing sheets is required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. If all the figures on a drawing sheet are canceled, a replacement sheet is not required. 35 U.S.C. 112 (a) and (b) PARAGRAPH REJECTION The claim is finally rejected under 35 U.S.C. 112(a) and (b) or pre-AIA 35 U.S.C. 112, first and second paragraphs, as the claimed invention is not described in such full, clear, concise and exact terms as to enable any person skilled in the art to make and use the same, and fails to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or, for applications subject to pre-AIA 35 U.S.C. 112, the applicant) regards as the invention. The claim is indefinite and non-enabling because of the following drawing issues. 1. It is not clear in the bottom view of Fig. 1.6 what the full shape and design is of several of the features including the features around the outside bottom edge and the four wheels. Specifically, the solid black areas obscure the details and leave the full shape and design of the shelf open to conjecture. See below for an annotated drawing of these features. It is suggested that to overcome the 35 U.S.C. 112 (a) and (b) Paragraph Rejection these features be converted to broken lines. [AltContent: oval][AltContent: textbox ([img-media_image2.png])] [AltContent: oval] [AltContent: arrow][AltContent: arrow][AltContent: textbox (It is not clear in the bottom view of Fig. 1.6 what the full shape and design is of several of the features including the rectangular features along the exterior bottom edge and the four wheels.)] NOTE It must be noted that the addition of any views that introduce design features not present in the original drawings could constitute new matter. New matter is anything (structure, features, elements) which was not apparent (seen) in the drawings as originally filed. It is possible for new matter to consist of the removal as well as the addition of structure, features, or elements. This failure to clearly distinguish the exact shape of all the elements in the claimed design warrants a 35 U.S.C. 112 (a) and (b) Paragraph Rejection. Applicants’ amendment necessitated the new ground(s) of rejection presented in this Office action. Accordingly, THIS ACTION IS MADE FINAL. See MPEP § 706.07(a). Applicant is reminded of the extension of time policy as set forth in 37 CFR 1.136(a). A shortened statutory period for reply to this final action is set to expire THREE MONTHS from the mailing date of this action. In the event a first reply is filed within TWO MONTHS of the mailing date of this final action and the advisory action is not mailed until after the end of the THREE-MONTH shortened statutory period, then the shortened statutory period will expire on the date the advisory action is mailed, and any extension fee pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of the advisory action. In no event, however, will the statutory period for reply expire later than SIX MONTHS from the date of this final action. EXAMINER’S CONTACT INFORMATION Any inquiry concerning this communication or earlier communications from the examiner should be directed to KELLEY A DONNELLY whose telephone number is (571) 272-4649. The examiner can normally be reached Monday through Friday from 7:00 am and 3:30 pm. If attempts to reach the examiner by telephone are unsuccessful, the examiner's supervisor, Jennifer Rempfer, can be reached at telephone number (571) 270-0248. The fax phone number for the organization where this application or proceeding is assigned is (571) 273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. Examiner interviews are available via a variety of formats. See MPEP § 713.01. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) Form at https://www.uspto.gov/InterviewPractice. /Kelley A Donnelly/ Primary Examiner, Art Unit 2913 10/13/2026
Read full office action

Prosecution Timeline

Mar 19, 2024
Application Filed
Mar 11, 2026
Non-Final Rejection mailed — §112
Sep 10, 2026
Response Filed
Oct 14, 2026
Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent D1131091
Display stand
2y 3m to grant Granted Jun 23, 2026
Patent D1131089
Storage rack
1y 2m to grant Granted Jun 23, 2026
Patent D1128343
Wire shelf
1y 1m to grant Granted Jun 02, 2026
Patent D1110083
SHELVING UNIT
1y 6m to grant Granted Jan 27, 2026
Patent D1104578
Storage Rack
1y 9m to grant Granted Dec 09, 2025
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

3-4
Expected OA Rounds
95%
Grant Probability
99%
With Interview (+5.1%)
1y 7m (~0m remaining)
Median Time to Grant
Moderate
PTA Risk
Based on 856 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month