Notice of Pre-AIA or AIA Status
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Examiners Comment on the Specification
For better form, it is suggested that the broken line description be separated from the figure descriptions and included as a separate sentence on a separate line. In this event, the semi-colon following the description for Fig. 1.8 should be replaced with a period, and the first letter of the broken line description capitalized.
Rejection under 35 USC § 112(a) and (b)
The claim is rejected under 35 U.S.C. 112(a) and (b) or pre-AIA 35 U.S.C. 112, first and second paragraphs, as the claimed invention is not described in such full, clear, concise and exact terms as to enable any person skilled in the art to make and use the same, and fails to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or, for applications subject to pre-AIA 35 U.S.C. 112, the applicant) regards as the invention.
The claim is indefinite and nonenabling for the following:
The visual disclosure is inadequate such that the appearance and shape or configuration of the design for which protection is sought cannot be determined or understood specifically:
The full appearance of the design is not shown. Specifically, the three-dimensional form of the interior of the cover cannot be ascertained from the drawings. See diagram below, wherein the gray shading represents subject matter within Figs. 1.5 and 1.8 that are indefinite and non-enabled. It is unclear if the details within this area lie flush with the surrounding surfaces and represent surface ornamentation, or if they represent raised or recessed features or structure. Furthermore, if these details are intended to represent raised or recessed features or structure, it cannot be known to what degree the features or structures are raised or recessed.
PNG
media_image1.png
710
2016
media_image1.png
Greyscale
To overcome this rejection, it is suggested that applicant submit new drawings of the claimed design that show the design clearly and consistently. If certain non-enabled portions of the design cannot be fully enabled without the introduction of new matter, applicant may remove from the claim the areas or portions of the design that are considered indefinite and nonenabling by converting them to broken line and, if necessary, amending the specification to indicate those portions form no part of the claimed design.
Reply Reminder
Applicant is reminded that any reply to this communication must be signed either by a patent practitioner (i.e., a patent attorney or agent registered to practice before the United States Patent and Trademark Office) or by the applicant. If the applicant is a juristic entity, the reply must be signed by a patent practitioner. See 37 CFR 1.33(b).
Discussion of the Merits of the Application
All discussions between the applicant and the examiner regarding the merits of a pending application will be considered an interview and are to be made of record. See MPEP 713. The examiner will not discuss the merits of the application with applicant’s representative if the representative is not registered to practice before the USPTO. Appointment as applicant’s representative before the International Bureau pursuant to Rule 3 of the Common Regulations under the Hague Agreement does NOT entitle such representative to represent the applicant before the USPTO. Furthermore, an applicant that is a juristic entity must be represented by a patent attorney or agent registered to practice before the USPTO. Additional information regarding interviews is set forth below.
Telephonic or in person interviews:
A telephonic or in person interview may only be conducted with an attorney or agent registered to practice before the USPTO (“registered practitioner”) or with a pro se applicant (an applicant who is the inventor and who is not represented by a registered practitioner).
The registered practitioner may either be of record or not of record. To become “of record”, a power of attorney (POA) in accordance with 37 CFR 1.32 must be filed in the application. Form PTO/AIA /80 “Power of Attorney to Prosecute Applications Before the USPTO”, available at https://www.uspto.gov/patent/forms/forms-patent-applications-filed-or-after-september-16-2012, may be used for this purpose. See MPEP 402.02(a) for further information. Interviews may also be conducted with a registered practitioner not of record provided the registered practitioner can show authorization to conduct an interview by completing, signing and filing an “Applicant Initiated Interview Request Form” (PTOL-413A) (available at the USPTO web page indicated above). See MPEP 405. For acceptable ways to submit forms to the USPTO, see “When Responding to Official USPTO Correspondence” below.
Responding to Official USPTO Correspondence
The USPTO transacts business in writing. All replies must be signed in accordance with 37 CFR 1.33(b). Pursuant to 37 CFR 1.33(b)(3), a reply submitted on behalf of a juristic applicant must be signed by an attorney or agent registered to practice before the USPTO. Applicants may submit replies to Office actions only by:
Online via the USPTO's Electronic Filing System‐Web (EFS‐Web) (Registered eFilers only) https://www.uspto.gov/patents/apply
Mail: Commissioner for Patents, P.O. Box 1450, Alexandria, VA, 22313‐1450
Facsimile to the USPTO's Official Fax Number (571‐273‐8300)
Hand‐carry to USPTO's Alexandria, Virginia Customer Service Window https://www.uspto.gov/patents/maintain/responding-office-actions
Replacement Drawings
A response is required in reply to the Office action to avoid abandonment of the application. If corrected drawings are submitted in response to this Office action, they must be in compliance with 37 CFR 1.121(d). Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as amended. If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. If all the figures on a drawing sheet are canceled, a replacement sheet is not required. A marked-up copy of the drawing sheet (labeled as “Annotated Sheet”) including an annotation showing that all the figures on that drawing sheet have been canceled must be presented in the amendment or remarks section that explains the change to the drawings. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either "Replacement Sheet" or "New Sheet" pursuant to 37 CFR 1.121(d) . If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action.
When preparing new or replacement drawings, any amendment must meet the written description requirement of 35 USC 112(a). It must be apparent that applicant was in possession of the amended design at the time of filing. This pertains to either: the addition to, or the removal of, any elements shown in the originally disclosed design.
Conclusion
The claim stands rejected under 35 U.S.C 112(a) and (b).
The prior art made of record and not relied upon is considered pertinent to applicant's disclosure.
Contact Information
Any inquiry concerning this communication or earlier communications from the examiner should be directed to AMANDA KAY BIRDWELL whose telephone number is (571)272-9125. The examiner can normally be reached Mon-Fri 8:30-5.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, George Ulsh, can be reached at (571)270-1433. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/A.K.B./
Examiner, Art Unit 2931
/GEORGE J ULSH/Supervisory Patent Examiner, Art Unit 2922