Notice of Pre-AIA or AIA Status
1. The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
DETAILED ACTION
Drawings Objection
2. The drawings are objected to because every line, number, and letter must be durable, clean, black (except for color drawings), sufficiently dense and dark, and uniformly thick and well-defined. The structure lines are blurry and pixelated in FIGS 1.1-1.32. Correction is required to give the drawings a satisfactory reproduction characteristic.
3. The drawings are objected to because they do not meet the standards of MPEP 2909.02, 37 C.F.R. 1.1026, Rule 9, Hague Administrative Instructions Section 401. Presentation of Reproductions.
(c) The photographs or other graphic representations accompanying an international application filed on paper shall be either pasted or printed directly onto a separate sheet of A4 paper which is white and opaque. The separate sheet of paper shall be used upright and shall not contain more than 25 reproductions.
(d) The reproductions accompanying an international application must be arranged in the orientation in which the applicant wishes them to be published. Where that application is filed on paper, a margin of at least 5 millimeters should be left around the representation of each industrial design.
4. Care must be exercised to avoid introduction of anything which could be construed to be new matter prohibited by 35 U.S.C. 132 and 37 CFR 1.121(f) when preparing new reproductions. Each sheet of reproductions submitted after the filing date of an application must be labeled in the top margin as either “REPLACEMENT SHEET” or “NEW SHEET” pursuant to 37 CFR 1.121(d). Applicant is reminded that the numbering of the reproductions and legends must follow the Hague Administrative Instructions Section 405(a), consisting of two separate figures separated by a dot (e.g., 1.1, 1.2, 1.3, etc. for the first design, 2.1, 2.2, 2.3, etc. for the second design and so on) (see 37 CFR 1.1026 and MPEP 2909.02).
5. The necessity for good drawings in a design patent application cannot be overemphasized. As the drawing constitutes the whole disclosure of the design, it is of utmost importance that it be so well executed both as to clarity of showing and completeness, that nothing regarding the design sought to be patented is left to conjecture. An insufficient drawing may be fatal to validity (35 U.S.C. 112(a) or pre-AIA 35 U.S.C. 112, first paragraph). Moreover, an insufficient drawing may have a negative effect with respect to the effective filing date of a continuing application.
Double Patenting
6. The non-statutory double patenting rejection is based on a judicially created doctrine grounded in public policy (a policy reflected in the statute) so as to prevent the unjustified or improper timewise extension of the “right to exclude” granted by a patent and to prevent possible harassment by multiple assignees. See In re Goodman, 11 F.3d 1046, 29 USPQ2d 2010 (Fed. Cir. 1993); In re Longi, 759 F.2d 887, 225 USPQ 645 (Fed. Cir. 1985); In re Van Ornum, 686 F.2d 937, 214 USPQ 761 (CCPA 1982); In re Vogel, 422 F.2d 438, 164 USPQ 619 (CCPA 1970); and In re Thorington, 418 F.2d 528, 163 USPQ 644 (CCPA 1969).
7. A timely filed terminal disclaimer in compliance with 37 CFR 1.321 (c) may be used to overcome an actual or provisional rejection based on a nonstatutory double patenting ground provided the conflicting application or patent is shown to be commonly owned with this application. See 37 CFR 1.131 (c). A registered attorney or agent of record may sign a terminal disclaimer.
8. The USPTO internet Web site contains terminal disclaimer forms which may be used. Please visithttp://www.uspto.gov/forms/. The filing date of the application will determine what form should be used. A web-based eTerminal Disclaimer may be filled out completely online using web-screens. An eTerminal Disclaimer that meets all requirements is auto-processed and approved immediately upon submission. For more information about eTerminal Disclaimers, refer to http://www.uspto.gov/patents/process/file/efs/guidance/eTD-info-l.jsp.
9. The claim is provisionally rejected on the grounds of nonstatutory double patenting of the claim of copending Application No. 35/524737. Although the conflicting claims are not identical, they are not patentably distinct from each other, because the change in appearance seen between the designs created by the alternate arrangement / conditions of use does not change the underlying appearance of the design and is considered an obvious modification to one skilled in the art. It is understood that obvious changes in arrangement/configuration is not a patentable distinction. In re Stevens, 81 USPQ 362 (CCPA 1949). This is a provisional nonstatutory double patenting rejection because the conflicting claims have not in fact been patented.
10. It is well settled that it is unobviousness in the overall appearance of the claimed design, when compared with the prior art, rather than minute details or small variations in design as appears to be the case here, that constitutes the test of design patentability. See In re Frick, 275 F.2d 741, 125 USPQ 191 (CCPA 1960) and In re Lamb, 286 F.2d 610, 128 USPQ 539 (CCPA 1961).
Conclusion
11. The claim stands rejected under obviousness-type in view of Hague Design Application No. 35/524737.
12. The references cited but not applied are considered cumulative art related to the subject matter of the claimed design.
Hague - Reply Reminder
13. Applicant is reminded that any reply to this Refusal must be signed either by a patent practitioner (i.e., a patent attorney or agent registered to practice before the United States Patent and Trademark Office) or by the applicant. If the applicant is a juristic entity, the reply must be signed by a patent practitioner. See 37 CFR 1.33(b). If corrected drawings are submitted in response to this Office action, they must be in compliance with 37 CFR 1.121(d).
Discussion of the Merits of the Application
14. All discussions between the applicant and the examiner regarding the merits of a pending application will be considered an interview and are to be made of record. See MPEP 713. The examiner will not discuss the merits of the application with applicant’s representative if the representative is not registered to practice before the USPTO. Appointment as applicant’s representative before the International Bureau pursuant to Rule 3 of the Common Regulations under the Hague Agreement does NOT entitle such representative to represent the applicant before the USPTO. Furthermore, an applicant that is a juristic entity must be represented by a patent attorney or agent registered to practice before the USPTO. Additional information regarding interviews is set forth below.
Telephonic or in person interviews
15. A telephonic or in person interview may only be conducted with an attorney or agent registered to practice before the USPTO (“registered practitioner”) or with a pro se applicant (an applicant who is the inventor and who is not represented by a registered practitioner).
16. The registered practitioner may either be of record or not of record. To become “of record”, a power of attorney (POA) in accordance with 37 CFR 1.32 must be filed in the application. Form PTO/AIA /80 “Power of Attorney to Prosecute Applications Before the USPTO”, available at https://www.uspto.gov/patent/forms/forms-patent-applications-filed-or-after-september-16-2012, may be used for this purpose. See MPEP 402.02(a) for further information. Interviews may also be conducted with a registered practitioner not of record provided the registered practitioner can show authorization to conduct an interview by completing, signing and filing an “Applicant Initiated Interview Request Form” (PTOL-413A) (available at the USPTO web page indicated above). See MPEP 405. For acceptable ways to submit forms to the USPTO, see “When Responding to Official USPTO Correspondence” below.
17. If a pro se applicant or registered practitioner located outside of the United States wishes to communicate by telephone, it is suggested that such person email the examiner at CLINT.SAMUEL@uspto.gov to arrange a time and date for the telephone interview. Please include proposed days and times for the proposed call. When proposing a day/time for the interview, please take into account the examiner’s work schedule indicated in the last paragraph of this communication. The email should also be used to determine who will initiate the telephone call.
Email Communications
18. The merits of the application will not be discussed via email (or other electronic medium) unless appropriate authorization for internet communication is filed in the application. Form PTO/SB/439 “Authorization for Internet Communications in a Patent Application or Request to Withdraw Authorization for Internet Communications” may be used to provide such authorization and is available at the USPTO web page indicated above. The authorization may not be sent by email to the USPTO. For acceptable ways to submit the authorization form to the USPTO, see “When Responding to Official USPTO Correspondence” below. See MPEP 502.03 II for further information.
When Responding to Official USPTO Correspondence
19. When responding to official correspondence issued by the USPTO, including a notification of refusal, please note the following:
20. The USPTO transacts business in writing. All replies must be signed in accordance with 37 CFR 1.33(b). Pursuant to 37 CFR 1.33(b)(3), a reply submitted on behalf of a juristic applicant must be signed by an attorney or agent registered to practice before the USPTO.
Contact Information
21. Any inquiry concerning this communication or earlier communications from the examiner should be directed to CLINT SAMUEL whose telephone number is (571)272-5045. The examiner can normally be reached 8:00-4:00 Monday - Friday.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Richard Kearney can be reached on 571-272-8312. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/CLINT A SAMUEL/Primary Examiner, Art Unit 2933