Prosecution Insights
Last updated: November 04, 2026
Application No. 35/526,776

Jewel case

Non-Final OA §103§112
Filed
Mar 20, 2025
Priority
Sep 23, 2024 — CH CH2024-00471 +1 more
Examiner
DUBUS, ALEXANDRIA N
Art Unit
2913
Tech Center
2900
Assignee
Pa Cotte SA
OA Round
1 (Non-Final)
100%
Grant Probability
Favorable
1-2
OA Rounds
1m
Est. Remaining
99%
With Interview

Examiner Intelligence

Grants 100% — above average
100%
Career Allowance Rate
46 granted / 46 resolved
+40.0% vs TC avg
Minimal +0% lift
Without
With
+0.0%
Interview Lift
resolved cases with interview
Fast prosecutor
1y 9m
Avg Prosecution
4 currently pending
Career history
48
Total Applications
across all art units

Statute-Specific Performance

§103
11.3%
-28.7% vs TC avg
§102
20.8%
-19.2% vs TC avg
§112
47.2%
+7.2% vs TC avg
Black line = Tech Center average estimate • Based on career data from 46 resolved cases

Office Action

§103 §112
Notice of Pre-AIA or AIA Status The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA . DETAILED ACTION Applicant's election of Group II (Embodiments 2-5) is hereby acknowledged. Groups I and III are withdrawn from further consideration by the examiner, 37 CFR § 1.142(b), as being for a nonelected design. Note Regarding Foreign Priority Claim Acknowledgment is made of applicant's claim for foreign priority based on Swiss Confederation application nos.CH2024-00471 and CH2025-00008. It is noted, however, that applicant has not filed a certified copy of CH2024-00471 and CH2025-00008 as required by 35 USC 119(b). In the case of a design application, the certified copy must be filed during the pendency of the application. If the certified copy of the foreign application is filed after the date the issue fee is paid, the patent will not include the priority claim unless corrected by a certificate of correction under 35 USC § 255 and 37 CFR § 1.323. Applicant should contact the Patents Electronic Business Center and request that the matter be escalated to determine why the priority document is not yet in the file. Note that the applicant continues to bear the ultimate responsibility for ensuring that the priority document is filed during the pendency of the application and before the patent is issued. For more information visit: https://www.uspto.gov/patents/basics/international-protection/electronic-priority-document- exchange-pdx. Objection to the Specification Pursuant to applicant's election of Group II, the descriptions of all non-elected figures must be canceled. It appears the descriptions for Group I have not yet been cancelled. A replacement specification is required. Non-Final Rejection under 35 USC § 103 The claim is rejected under 35 USC § 103 as being unpatentable over Chamfer Cube (non-patent document U, dated 06/14/2022) in view of the prior art as demonstrated by D967629 to Ruibin Wang (dated 10/25/2022, hereinafter “Wang”). Although the invention is not identically disclosed or described as set forth in 35 U.S.C. 102, if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a designer having ordinary skill in the art to which the claimed invention pertains, the invention is not patentable. Chamfer Cube has an overall appearance with design characteristics that are visually similar to those of the claimed design, in showing a cube or rectangular prism with chamfered edges. See annotated drawings below: PNG media_image1.png 612 1295 media_image1.png Greyscale The claimed design differs from Chamfer Cube in that it has feet. Wang shows a similar-style foot, with straight edges and a tapered bottom. It also includes four feet. See annotated drawings below: PNG media_image2.png 399 626 media_image2.png Greyscale It would have been obvious to a designer of ordinary skill in the art before the effective filing date of the present claimed invention to modify Chamfer Cube with Wang by adding feet because such a modification is no more than a simple addition of a known design element (adding feet to an existing shape). Moreover, such substitution of one known design element for another known design element in the same field would have been within the skill of an ordinarily skilled designer. It is well settled that it is unobviousness in the overall appearance of the claimed design, when compared with the prior art, rather than minute details or small variations in design as appears to be the case here, that constitutes the test of design patentability. See In re Frick, 275 F.2d 741, 125 USPQ 191 (CCPA 1960) and In re Lamb, 286 F.2d 610, 128 USPQ 539 (CCPA 1961). Non-Final Rejection under 35 USC § 112(a) and (b) The claim is rejected under 35 USC § 112(a) and (b) as the claimed invention is not described in such full, clear, concise and exact terms as to enable any person skilled in the art to make and use the same, and fails to particularly point out and distinctly claim the subject matter which the inventor or joint inventor regards as the invention. The claim is indefinite and non-enabling for the following reasons: The feet of the jewel case are not depicted consistently. When viewed from the front and back, there is an additional detail on the side of the feet that is not visible from other drawings. This issue is present in embodiments 2-4. See annotated drawings an example below: PNG media_image3.png 447 870 media_image3.png Greyscale Due to the line quality, it is difficult to see the details on the feet in embodiment 5. See the following point for additional details. The drawings submitted on 09/26/2025 are low quality; the drawings appear fuzzy and pixelated, especially when trying to view small details such as the feet of the jewel case. Hague Rule 9(2) states [Requirements Concerning Reproductions] (a) Reproductions shall be of a quality permitting all the details of the industrial design to be clearly distinguished and permitting publication. The replacement drawings must be made by a process which will give them satisfactory reproduction characteristics. Every line, number, and letter must be durable, clean, black, sufficiently dense and dark, and uniformly thick and well-defined. The weight of all lines and letters must be heavy enough to permit adequate reproduction. See annotated drawing below as an example, but note that the problems exist throughout all of the figures: PNG media_image4.png 594 657 media_image4.png Greyscale PNG media_image5.png 320 792 media_image5.png Greyscale Due to the feet not being depicted clearly and the low drawing quality, the claimed design is in fact subject to multiple interpretations, and one of ordinary skill in the art would not be able to reproduce the design without the use of conjecture. This renders the claim indefinite and non-enabled. To overcome this rejection, it is suggested that applicant submit new drawings of the claimed design that show the design clearly and consistently. If certain non-enabled portions of the design cannot be fully enabled without the introduction of new matter, applicant may remove from the claim the areas or portions of the design that are considered indefinite and non-enabling by converting them to broken lines. and amending the specification to include a broken line statement indicating those portions form no part of the claimed design. Replacement Drawings Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR § 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. When preparing new or replacement drawings, be careful to avoid introducing new matter. New matter is prohibited by 35 USC § 132 and 37 CFR § 1.121(f). Conclusion Accordingly, the claim stands rejected under 35 USC § 103 and 35 USC § 112(a) and (b) as set forth above. The prior art made of record and not relied upon is considered pertinent to applicant's disclosure. CONTACT INFORMATION Any inquiry concerning this communication or earlier communications from the examiner should be directed to ALEXANDRIA DUBUS whose telephone number is (703)756-1979. The examiner can normally be reached M-F | 12:00 PM - 9:00 PM ET. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Ian Simmons can be reached at (571) 272-2658. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /A.D./Examiner, Art Unit 2913 /BRETT MILLER/Examiner, Art Unit 2934 Applicant is reminded that any reply to this communication must be signed either by a patent practitioner (i.e., a patent attorney or agent registered to practice before the United States Patent and Trademark Office) or by the applicant. If the applicant is a juristic entity or has at least one party which has a domicile that is not located within the United States or its territories, the reply must be signed by a patent practitioner. See 37 CFR 1.33(b). All discussions between the applicant and the examiner regarding the merits of a pending application will be considered an interview and are to be made of record. See MPEP § 713. The examiner will not discuss the merits of the application with applicant's representative if the representative is not registered to practice before the USPTO. Appointment as applicant’s representative before the International Bureau pursuant to Rule 3 of the Regulations under the Hague Agreement does NOT entitle such representative to represent the applicant before the USPTO. Furthermore, an applicant that is a juristic entity or has at least one party which has a domicile that is not located within the United States, or its territories must be represented by a patent attorney or agent registered to practice before the USPTO. Additional information regarding interviews is set forth below. Telephonic or in person interviews A telephonic or in person interview may only be conducted with an attorney or agent registered to practice before the USPTO ("registered practitioner") or with a pro se applicant (an applicant who is the inventor and who is not represented by a registered practitioner). The registered practitioner may either be of record or not of record. To become "of record," a power of attorney (POA) in accordance with 37 CFR 1.32 must be filed in the application. Form PTO/AIA /80 "Power of Attorney to Prosecute Applications Before the USPTO," available at www.uspto.gov/PatentForms, may be used for this purpose. See MPEP § 402.02(a) for further information. Interviews may also be conducted with a registered practitioner not of record provided the registered practitioner can show authorization to conduct an interview by completing, signing and filing an "Applicant Initiated Interview Request Form" (PTOL-413A) (available at the USPTO webpage indicated above). See MPEP § 405. For acceptable ways to submit forms to the USPTO, see "When Responding to Official USPTO Correspondence" below.
Read full office action

Prosecution Timeline

Mar 20, 2025
Application Filed
Oct 22, 2026
Non-Final Rejection mailed — §103, §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent D1133530
CARRIER BAG WITH EXPANDABLE CENTER COMPARTMENT
2y 3m to grant Granted Jul 14, 2026
Patent D1119308
CONTAINER
1y 12m to grant Granted Mar 24, 2026
Patent D1118150
Bag
1y 6m to grant Granted Mar 17, 2026
Patent D1104458
Saddlebag
3y 1m to grant Granted Dec 09, 2025
Patent D1102149
Deck Box
2y 3m to grant Granted Nov 18, 2025
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
100%
Grant Probability
99%
With Interview (+0.0%)
1y 9m (~1m remaining)
Median Time to Grant
Low
PTA Risk
Based on 46 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month