Technology areas: Chemistry & Materials • Medical Devices & Mechanical Engineering
9 pending office actions • 5 art units • 8 examiners • 0 of 9 (0%) have an AI response strategy ready • 15 patents granted in the last 365 days
Based on the USPTO statutory response window for each pending office action. 2 of the docket's apps have a known mailing date; the rest are excluded from the tile counts.
Difficulty is derived from the rejection statutes on the most recent pending office action. §101-driven and multi-statute cases are graded Hard; §112-only and obviousness-type double-patenting cases are graded Easy; everything else is Medium. "Unknown" means we have not yet parsed a statute for that office action.
| Bucket | Cases |
|---|---|
| §103 only | 6 (67%) |
| Multi-statute (no §101) | 3 (33%) |
How the docket's pending cases split across USPTO tech-center bands.
Manual office-action response work runs about 10 hours per case. The time-saved bands below show what IP Author's prosecution pipeline typically delivers — a conservative 20% on the low end, 35% in the middle, 50% on the high end.
| Examiner | Apps on this docket | Allow rate | Interview lift |
|---|---|---|---|
| ELOSHWAY, NIKI MARINA | 2 | 63.5% | +24.6% |
| TAWFIK, SAMEH | 1 | 63.1% | +31.5% |
| DERUSSO, JOHN J | 1 | 80.5% | +14.0% |
| BEHA, CAROLINE | 1 | 57.6% | +24.0% |
| LIANG, SHIBIN | 1 | 63.0% | +17.1% |
| WANG, ALEXANDER A | 1 | 65.7% | +21.5% |
| GROSSO, GREGORY CHAD | 1 | 72.2% | +18.6% |
| FRY, PATRICK B | 1 | 54.1% | +8.2% |
Multi-statute / §101-driven matters, or cases in front of an examiner with an allow rate under 30%. The top 3 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18987118 | CLOSURE DEVICE FOR A CONTAINER | ELOSHWAY, NIKI MARINA | — |
| 18730605 | INJECTION MOLD COMPONENT | DERUSSO, JOHN J | — |
| 18714405 | MOLDS, MOLD ASSEMBLIES AND STACK COMPONENTS | BEHA, CAROLINE | — |
Cases in front of an examiner whose interview lift is 10 percentage points or more — i.e. interviewed cases historically resolve more favorably than non-interviewed ones. The top 8 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18278130 | PLASTIC BLANK HEATING METHOD AND APPARATUS | LIANG, SHIBIN | 13d |
| 17997682 | METHODS AND APPARATUS FOR MOLDING CONTROL | WANG, ALEXANDER A | 15d |
| 18987118 | CLOSURE DEVICE FOR A CONTAINER | ELOSHWAY, NIKI MARINA | — |
| 18938836 | CLOSURES WITH TAMPER EVIDENCE | ELOSHWAY, NIKI MARINA | — |
| 18919140 | CLOSURES WITH TAMPER EVIDENCE | TAWFIK, SAMEH | — |
| 18730605 | INJECTION MOLD COMPONENT | DERUSSO, JOHN J | — |
| 18714405 | MOLDS, MOLD ASSEMBLIES AND STACK COMPONENTS | BEHA, CAROLINE | — |
| 17748382 | MOLDING APPARATUS AND METHOD OF CONTROLLING SAME | GROSSO, GREGORY CHAD | — |
| Art Unit | Apps |
|---|---|
| 3736 | 2 |
| 3731 | 2 |
| 1748 | 2 |
| 1741 | 2 |
| 1744 | 1 |
| App # | Title | Examiner | Art Unit | Statutes | Status | Due in | AI | Filed |
|---|---|---|---|---|---|---|---|---|
| 18987118 | CLOSURE DEVICE FOR A CONTAINER | ELOSHWAY, NIKI MARINA | 3736 | §103§112 | Final Rejection | — | Pending | Dec 19, 2024 |
| 18938836 | CLOSURES WITH TAMPER EVIDENCE | ELOSHWAY, NIKI MARINA | 3736 | §103 | Final Rejection | — | Pending | Nov 06, 2024 |
| 18919140 | CLOSURES WITH TAMPER EVIDENCE | TAWFIK, SAMEH | 3731 | §103 | Final Rejection | — | Pending | Oct 17, 2024 |
| 18730605 | INJECTION MOLD COMPONENT | DERUSSO, JOHN J | 1744 | §102§103§112 | Non-Final OA | — | Pending | Jul 19, 2024 |
| 18714405 | MOLDS, MOLD ASSEMBLIES AND STACK COMPONENTS | BEHA, CAROLINE | 1748 | §102§103§112 | Non-Final OA | — | Pending | May 29, 2024 |
| 18278130 | PLASTIC BLANK HEATING METHOD AND APPARATUS | LIANG, SHIBIN | 1741 | §103 | Final Rejection | 13d | Pending | Aug 21, 2023 |
| 17997682 | METHODS AND APPARATUS FOR MOLDING CONTROL | WANG, ALEXANDER A | 1741 | §103 | Non-Final OA | 15d | Pending | Nov 01, 2022 |
| 17748382 | MOLDING APPARATUS AND METHOD OF CONTROLLING SAME | GROSSO, GREGORY CHAD | 1748 | §103 | Final Rejection | — | Pending | May 19, 2022 |
| 16636398 | MOLDED ARTICLE, CONTAINER AND A METHOD FOR PRINTING THEREON | FRY, PATRICK B | 3731 | §103 | Final Rejection | — | Pending | Feb 04, 2020 |
IP Author helps IP teams respond to office actions faster with AI-generated responses, examiner analytics, and prosecution intelligence.
Start Free TrialHusky Injection Molding Systems Ltd. has 9 pending office actions as of October 2026, spread across 5 art units and 8 examiners.
Niki Marina Eloshway has the most, with 2 of Husky Injection Molding Systems Ltd.'s pending office actions.
Mostly Chemistry & Materials (USPTO Tech Center 1700), based on where its pending office actions are examined.
