Technology area: Medical Devices & Mechanical Engineering
3 pending office actions • 1 art units • 3 examiners • 0 of 3 (0%) have an AI response strategy ready
Jumatech GmbH currently manages 3 pending office actions within the Medical Devices & Mechanical Engineering technology area. This portfolio is concentrated under 1 distinct art unit, indicating a specific technical focus for the company's current intellectual property efforts. The 3 pending office actions are distributed among 3 distinct examiners, which means that the prosecution is being handled by several different individuals despite the single art unit. This distribution requires the applicant to monitor multiple examiner styles simultaneously to ensure consistent results across the active applications.
ABRAHAM, JOSE K is identified as the busiest examiner for this portfolio, currently overseeing 1 pending office action. This 1 action represents a portion of the 3 total pending actions the company is navigating. Because the 3 distinct examiners each handle a portion of the workload, the prosecution strategy must account for the specific tendencies of these officials even within the same administrative group. The involvement of 3 examiners for 3 actions means no individual handles more than 1 case. Success depends on tailoring responses to the unique feedback received from each individual examiner while maintaining a cohesive strategy for the portfolio.
Difficulty is derived from the rejection statutes on the most recent pending office action. §101-driven and multi-statute cases are graded Hard; §112-only and obviousness-type double-patenting cases are graded Easy; everything else is Medium. "Unknown" means we have not yet parsed a statute for that office action.
| Bucket | Cases |
|---|---|
| §112 only | 1 (33%) |
| Multi-statute (no §101) | 2 (67%) |
How the docket's pending cases split across USPTO tech-center bands.
Manual office-action response work runs about 10 hours per case. The time-saved bands below show what IP Author's prosecution pipeline typically delivers — a conservative 20% on the low end, 35% in the middle, 50% on the high end.
| Examiner | Apps on this docket | Allow rate | Interview lift |
|---|---|---|---|
| ABRAHAM, JOSE K | 1 | 83.5% | +32.5% |
| TRINH, MINH N | 1 | 85.5% | +9.6% |
| CAZAN, LIVIUS RADU | 1 | 62.9% | +24.9% |
Cases in front of an examiner with an allow rate of 80%+ where the difficulty is Easy or Medium. The top 1 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18284397 | METHOD AND SYSTEM FOR PRODUCING CIRCUIT BOARDS WITH PERFORATED SHAPED PARTS | TRINH, MINH N | — |
Multi-statute / §101-driven matters, or cases in front of an examiner with an allow rate under 30%. The top 2 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18683471 | METHOD FOR PRODUCING SHAPED PARTS FROM AN ELECTRICALLY CONDUCTIVE PLANAR ELEMENT AND CIRCUIT BOARD HAVING ATLEAST ONE SHAPED PART OF THIS TYPE | ABRAHAM, JOSE K | — |
| 18027590 | METHOD FOR PRODUCING A CIRCUIT BOARD AND A SHAPED PART FOR USE IN THIS METHOD | CAZAN, LIVIUS RADU | — |
Cases in front of an examiner whose interview lift is 10 percentage points or more — i.e. interviewed cases historically resolve more favorably than non-interviewed ones. The top 2 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18683471 | METHOD FOR PRODUCING SHAPED PARTS FROM AN ELECTRICALLY CONDUCTIVE PLANAR ELEMENT AND CIRCUIT BOARD HAVING ATLEAST ONE SHAPED PART OF THIS TYPE | ABRAHAM, JOSE K | — |
| 18027590 | METHOD FOR PRODUCING A CIRCUIT BOARD AND A SHAPED PART FOR USE IN THIS METHOD | CAZAN, LIVIUS RADU | — |
| Art Unit | Apps |
|---|---|
| 3729 | 3 |
| App # | Title | Examiner | Art Unit | Statutes | Status | Due in | AI | Filed |
|---|---|---|---|---|---|---|---|---|
| 18683471 | METHOD FOR PRODUCING SHAPED PARTS FROM AN ELECTRICALLY CONDUCTIVE PLANAR ELEMENT AND CIRCUIT BOARD HAVING ATLEAST ONE SHAPED PART OF THIS TYPE | ABRAHAM, JOSE K | 3729 | §102§103§112 | Non-Final OA | — | Pending | Feb 13, 2024 |
| 18284397 | METHOD AND SYSTEM FOR PRODUCING CIRCUIT BOARDS WITH PERFORATED SHAPED PARTS | TRINH, MINH N | 3729 | §112 | Non-Final OA | — | Pending | Sep 27, 2023 |
| 18027590 | METHOD FOR PRODUCING A CIRCUIT BOARD AND A SHAPED PART FOR USE IN THIS METHOD | CAZAN, LIVIUS RADU | 3729 | §102§112 | Non-Final OA | — | Pending | Mar 21, 2023 |
IP Author helps IP teams respond to office actions faster with AI-generated responses, examiner analytics, and prosecution intelligence.
Start Free TrialJumatech GmbH has 3 pending office actions as of October 2026, spread across 1 art units and 3 examiners.
Jose K Abraham has the most, with 1 of Jumatech GmbH's pending office actions.
Mostly Medical Devices & Mechanical Engineering (USPTO Tech Center 3700), based on where its pending office actions are examined.
