Prosecution Insights
Prosecution Insights
Technology areas: Semiconductors, Circuits & Optics • Medical Devices & Mechanical Engineering
3 pending office actions • 2 art units • 3 examiners • 0 of 3 (0%) have an AI response strategy ready
Jumatech GmbH has 3 pending office actions in the Semiconductors, Circuits & Optics technology area. These actions are spread across 3 distinct examiners, meaning each individual is handling a specific matter. However, these examiners are located within only 2 distinct art units, indicating a concentration of the portfolio's technical focus. The presence of 2 distinct art units suggests that the company is navigating specific technical sub-sectors within the Semiconductors, Circuits & Optics field.
ABRAHAM, JOSE K is identified as the busiest examiner, though he only manages 1 pending office action. This reflects the even distribution of the 3 pending office actions across the various examiners. Practitioners should coordinate their efforts across the art units to ensure that the matters are handled with a consistent understanding of the relevant prior art. Because each of the 3 distinct examiners is only handling 1 action, there is no examiner who dominates the prosecution landscape. This requires practitioners to be familiar with the individual styles of all examiners while also adhering to the broader standards of the 2 distinct art units.
Difficulty is derived from the rejection statutes on the most recent pending office action. §101-driven and multi-statute cases are graded Hard; §112-only and obviousness-type double-patenting cases are graded Easy; everything else is Medium. "Unknown" means we have not yet parsed a statute for that office action.
| Bucket | Cases |
|---|---|
| §112 only | 1 (33%) |
| Multi-statute (no §101) | 2 (67%) |
How the docket's pending cases split across USPTO tech-center bands.
Manual office-action response work runs about 10 hours per case. The time-saved bands below show what IP Author's prosecution pipeline typically delivers — a conservative 20% on the low end, 35% in the middle, 50% on the high end.
| Examiner | Apps on this docket | Allow rate | Interview lift |
|---|---|---|---|
| ABRAHAM, JOSE K | 1 | 83.2% | +32.9% |
| TRINH, MINH N | 1 | 85.5% | +9.8% |
| CAZAN, LIVIUS RADU | 1 | 63.0% | +24.8% |
Cases in front of an examiner with an allow rate of 80%+ where the difficulty is Easy or Medium. The top 1 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18284397 | METHOD AND SYSTEM FOR PRODUCING CIRCUIT BOARDS WITH PERFORATED SHAPED PARTS | TRINH, MINH N | — |
Multi-statute / §101-driven matters, or cases in front of an examiner with an allow rate under 30%. The top 2 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18683471 | METHOD FOR PRODUCING SHAPED PARTS FROM AN ELECTRICALLY CONDUCTIVE PLANAR ELEMENT AND CIRCUIT BOARD HAVING ATLEAST ONE SHAPED PART OF THIS TYPE | ABRAHAM, JOSE K | — |
| 18027590 | METHOD FOR PRODUCING A CIRCUIT BOARD AND A SHAPED PART FOR USE IN THIS METHOD | CAZAN, LIVIUS RADU | — |
Cases in front of an examiner whose interview lift is 10 percentage points or more — i.e. interviewed cases historically resolve more favorably than non-interviewed ones. The top 2 ordered by deadline are shown.
| App # | Title | Examiner | Due in |
|---|---|---|---|
| 18683471 | METHOD FOR PRODUCING SHAPED PARTS FROM AN ELECTRICALLY CONDUCTIVE PLANAR ELEMENT AND CIRCUIT BOARD HAVING ATLEAST ONE SHAPED PART OF THIS TYPE | ABRAHAM, JOSE K | — |
| 18027590 | METHOD FOR PRODUCING A CIRCUIT BOARD AND A SHAPED PART FOR USE IN THIS METHOD | CAZAN, LIVIUS RADU | — |
| Art Unit | Apps |
|---|---|
| 2847 | 1 |
| 3729 | 1 |
| App # | Title | Examiner | Art Unit | Statutes | Status | Due in | AI | Filed |
|---|---|---|---|---|---|---|---|---|
| 18683471 | METHOD FOR PRODUCING SHAPED PARTS FROM AN ELECTRICALLY CONDUCTIVE PLANAR ELEMENT AND CIRCUIT BOARD HAVING ATLEAST ONE SHAPED PART OF THIS TYPE | ABRAHAM, JOSE K | 2847 | §102§103§112 | Non-Final OA | — | Pending | Feb 13, 2024 |
| 18284397 | METHOD AND SYSTEM FOR PRODUCING CIRCUIT BOARDS WITH PERFORATED SHAPED PARTS | TRINH, MINH N | — | §112 | Non-Final OA | — | Pending | Sep 27, 2023 |
| 18027590 | METHOD FOR PRODUCING A CIRCUIT BOARD AND A SHAPED PART FOR USE IN THIS METHOD | CAZAN, LIVIUS RADU | 3729 | §102§112 | Non-Final OA | — | Pending | Mar 21, 2023 |
IP Author helps IP teams respond to office actions faster with AI-generated responses, examiner analytics, and prosecution intelligence.
Start Free Trial