Prosecution Insights
Last updated: November 05, 2026
Application No. 18/404,134

WIDE BASED HIGH VOLTAGE BIPOLAR JUNCTION TRANSISTOR WITH BURIED COLLECTORS AS HYBRID IGBT BUILDING BLOCK

Non-Final OA §112
Filed
Jan 04, 2024
Priority
Jan 04, 2023 — provisional 63/437,062 +1 more
Examiner
LIN, JOHN
Art Unit
2815
Tech Center
2800 — Semiconductors & Electrical Systems
Assignee
Ipower Semiconductor
OA Round
1 (Non-Final)
60%
Grant Probability
Moderate
1-2
OA Rounds
11m
Est. Remaining
69%
With Interview

Examiner Intelligence

Grants 60% of resolved cases
60%
Career Allowance Rate
258 granted / 430 resolved
-8.0% vs TC avg
Moderate +9% lift
Without
With
+9.0%
Interview Lift
resolved cases with interview
Typical timeline
3y 9m
Avg Prosecution
25 currently pending
Career history
459
Total Applications
across all art units

Statute-Specific Performance

§101
0.2%
-39.8% vs TC avg
§103
56.3%
+16.3% vs TC avg
§102
21.6%
-18.4% vs TC avg
§112
19.4%
-20.6% vs TC avg
Black line = Tech Center average estimate • Based on career data from 430 resolved cases

Office Action

§112
DETAILED ACTION Notice of Pre-AIA or AIA Status The present application, filed on or after 16 March 2013, is being examined under the first inventor to file provisions of the AIA . Response to Applicant This Office Action is in response to Applicant’s reply filed on 19 August 2026. Election/Restrictions Applicant’s election without traverse of species 1, to claims 1-6 and 9, in the reply filed on 19 August 2026 is acknowledged. Claims 7, 8 and 10-18 are withdrawn from further consideration pursuant to 37 CFR 1.142(b) as being drawn to nonelected species, there being no allowable generic or linking claim. The 19 May 2026 restriction requirement is maintained and is now made final. Information Disclosure Statement The information disclosure statement (IDS) submitted on 19 August 2026 is in compliance with the provisions of 37 CFR 1.97 and has been considered by the examiner. Drawings The drawings are objected to under 37 CFR 1.83(a). The drawings must show every feature of the invention specified in the claims. Therefore, the following must be shown or the feature(s) canceled from the claim(s): one or more collector regions of the first conductivity type in the second layer, the collector regions having boundaries laterally separated by a separation Wb forming one or more base regions between the boundaries of the collector regions, required by claim 1, and one or more collector regions of the first conductivity type at a bottom of the trenches, the collector regions having boundaries laterally separated by a gap Wb; and one or more base regions of the second conductivity type and overlying the drift region, the base regions being more heavily doped than the drift region and being connect to the drift region through the gap Wb; required by claim 9. The drawings do not show one collector region having boundaries laterally separated by a separation Wb forming one or more base regions between the boundaries, as required by claim 1. The drawings also do not show one collector region having boundaries laterally separated by a gap Wb, wherein the base region is connected to the drift region through the gap Wb, as required by claim 9. No new matter should be entered. Corrected drawing sheets in compliance with 37 CFR 1.121(d) are required in reply to the Office action to avoid abandonment of the application. Any amended replacement drawing sheet should include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is being amended. The figure or figure number of an amended drawing should not be labeled as “amended.” If a drawing figure is to be canceled, the appropriate figure must be removed from the replacement sheet, and where necessary, the remaining figures must be renumbered and appropriate changes made to the brief description of the several views of the drawings for consistency. Additional replacement sheets may be necessary to show the renumbering of the remaining figures. Each drawing sheet submitted after the filing date of an application must be labeled in the top margin as either “Replacement Sheet” or “New Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner, the applicant will be notified and informed of any required corrective action in the next Office action. The objection to the drawings will not be held in abeyance. Specification The disclosure is objected to because of the following informalities: The specification does not disclose one collector region having boundaries laterally separated by a separation Wb forming one or more base regions between the boundaries, as required by claim 1. The specification also does not disclose one collector region having boundaries laterally separated by a gap Wb, wherein the base region is connected to the drift region through the gap Wb, as required by claim 9. Appropriate correction is required. Claim Objections Claims 1 and 9 are objected to because of the following informalities: they recite “separation Wb” and “gap Wb,” respectively. The claims are objected to because they include reference characters which are not enclosed within parentheses. Reference characters corresponding to elements recited in the detailed description of the drawings and used in conjunction with the recitation of the same element or group of elements in the claims should be enclosed within parentheses so as to avoid confusion with other numbers or characters which may appear in the claims. See MPEP § 608.01(m). Appropriate correction is required. Claim Rejections - 35 USC § 112 The following is a quotation of 35 U.S.C. 112(b): (b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention. The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph: The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention. Claims 1-6 and 9 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor (or for applications subject to pre-AIA 35 U.S.C. 112, the applicant), regards as the invention. Claim 1 recites “one or more collector regions of the first conductivity type in the second layer, the collector regions having boundaries laterally separated by a separation Wb forming one or more base regions between the boundaries of the collector regions.” It is unclear and indefinite as to how one collector region can have boundaries laterally separated by a separation Wb forming one or more base regions between the boundaries of the collector regions. The claim will be interpreted as “two or more collector regions.” Claims 2-6 are rejected due to their dependency on claim 1. Claim 3 recites “the collector electrode” and “the base electrode.” There is insufficient antecedent basis for this limitation in the claim. The recitations will be interpreted as “a collector electrode” and “a base electrode.” Claim 9 recites “one or more collector regions of the first conductivity type at a bottom of the trenches, the collector regions having boundaries laterally separated by a gap Wb; and one or more base regions of the second conductivity type and overlying the drift region, the base regions being more heavily doped than the drift region and being connect to the drift region through the gap Wb.” It is unclear and indefinite as to how one collector region can have boundaries laterally separated by a gap Wb and one or more base regions being connected to the drift region through the gap Wb. The claim will be interpreted as “two or more collector regions.” Allowable Subject Matter The prior art made of record and not relied upon is considered pertinent to applicant's disclosure: U.S. Pub. 2011/0024791 and U.S. Pub. 2017/0243745 disclose a vertical BJT, but does not disclose base regions between boundaries of two or more collect regions, and does not disclose base regions being connected to the drift region through the gaps formed by boundaries of two or more collect regions. Claims 1-6 and 9 would be allowable if rewritten or amended to overcome the rejection(s) under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), 2nd paragraph, set forth in this Office action. The prior art of record, either singularly or in combination, does not suggest, in combination with the other claim limitations, two or more collector regions of the first conductivity type in the second layer, the collector regions having boundaries laterally separated by a separation Wb forming one or more base regions between the boundaries of the collector regions, as required by claim 1. Claims 2-6 depend either directly or indirectly from claim 1 and are allowed for the same reason. The prior art of record, either singularly or in combination, does not suggest, in combination with the other claim limitations, two or more collector regions of the first conductivity type at a bottom of the trenches, the collector regions having boundaries laterally separated by a gap Wb; and one or more base regions of the second conductivity type and overlying the drift region, the base regions being more heavily doped than the drift region and being connect to the drift region through the gap Wb, as required by claim 9. Conclusion Any inquiry concerning this communication or earlier communications from the examiner should be directed to JOHN LIN whose telephone number is (571)270-1274. The examiner can normally be reached Monday-Friday 10am-6pm EST. Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice. If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Joshua Benitez can be reached at 571-270-1435. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300. Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000. /J.L/ Examiner, Art Unit 2815 /JOSHUA BENITEZ ROSARIO/Supervisory Patent Examiner, Art Unit 2815
Read full office action

Prosecution Timeline

Jan 04, 2024
Application Filed
Oct 30, 2026
Non-Final Rejection mailed — §112 (current)

Precedent Cases

Applications granted by this same examiner with similar technology

Patent 12740172
SOLID-STATE IMAGING DEVICE AND ELECTRONIC DEVICE
3y 9m to grant Granted Sep 15, 2026
Patent 12740084
THIN-FILM TRANSISTORS AND RELATED METHODS OF MANUFACTURE WITH CHANNEL AND HARDMASK MATERIALS
1y 2m to grant Granted Sep 15, 2026
Patent 12727267
SEMICONDUCTOR DEVICE
4y 0m to grant Granted Sep 01, 2026
Patent 12713579
MEMORY CELL AND MEMORY DEVICE
2y 9m to grant Granted Aug 18, 2026
Patent 12666744
IMAGE SENSOR CHIP INCLUDING ALIGNMENT MARK AND IMAGE SENSOR PACKAGE INCLUDING THE SAME
3y 6m to grant Granted Jun 23, 2026
Study what changed to get past this examiner. Based on 5 most recent grants.

Strategy Recommendation AI-generated — please review before filing

Get a prosecution strategy drawn from examiner precedents, rejection analysis, and claim mapping.
Typically takes 5-10 seconds — AI-generated, attorney review required before filing

Prosecution Projections

1-2
Expected OA Rounds
60%
Grant Probability
69%
With Interview (+9.0%)
3y 9m (~11m remaining)
Median Time to Grant
Low
PTA Risk
Based on 430 resolved cases by this examiner. Grant probability derived from career allowance rate.

Sign in with your work email

Enter your email to receive a magic link. No password needed.

Personal email addresses (Gmail, Yahoo, etc.) are not accepted.

Free tier: 3 strategy analyses per month