Detailed Action
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Claims 1-18 are pending and examined.
Claim Rejections - 35 USC § 112
Indefiniteness
The following is a quotation of 35 U.S.C. 112(b):
(B) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
The following is a quotation of 35 U.S.C. 112 (pre-AIA ), second paragraph:
The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention.
Claims 1-19 are rejected under 35 U.S.C. 112(b), as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, or for pre-AIA the applicant regards as the invention.
Claims 1, 8, 10-11, 14-16 recite the limitation lettuce cv. “NNS-2123”.
The metes and bounds of the claim are indefinite because “NNS-2123” is not an art recognized term and which fails to clearly define the specific characteristics of the variety to be deposited. Perfection of the deposit as detailed in the rejection under 35 USC 112(a) for failing to comply with the enablement requirement would obviate this rejection.
Claims 2-7, 9, 12-13 and 17-19 are rejected for depending upon a rejected base claim and for failing to recite additional limitations to overcome the indefiniteness.
Written Description
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claim 17 is rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor or a joint inventor, or for applications subject to pre-AIA 35 U.S.C. 112, the inventor(s), at the time the application was filed, had possession of the claimed invention.
Claim 17 encompasses lettuce plants made a method of introducing a transgene to the plant of NNS-2123.
This claim is a product-by-process claims that read on transformed plants that have not been described. The method of claim 17 reads on a lettuce plant produced by the method of claim 16, which comprises introducing a transgene to a plant represented by the deposited line. However, the transitional phrase "comprising" does not limit the method to only one transgene. Even if one were to interpret claim 16 to be limited to a single transgene, this could encompass multiple traits and the resulting plants would nor be represented by the deposit and will have a distinct and unpredictable phenotype as compared to the deposited parent. Thus, plants with an unclear number of transformations have not been described.
See Vas-Cath Inc. v. Mahurkar 1991 (CA FC) 19 USPQ2d 1111, 1115, which teaches that the purpose of the written description is for the purpose of warning an innocent purchaser, or other person using a machine, of his infringement of the patent; and at the same time, of taking from the inventor the means of practicing upon the credulity or the fears of other persons, by pretending that his invention is more than what it really is, or different from its ostensible objects, that the patentee is required to distinguish his invention in his specification. In this case, there is no way that a practitioner would be able to determine if any particular soybean plant is infringing the instant claims, and therefore, the public has not been put on notice with a sufficient description of the claimed invention.
These claims are “reach through” claims in which the Applicant has described a starting material and at least one method step, however, they have not described the resulting product, and the genus of products that can be produced by the recited method steps and materials is so large that one of skill in the art is not able to envision the members of the genus. (See Univ. of Rochester v. G.D. Searle & Co., 358 F.3d 916, 920-23, 69 USPQ2d 1886, 1890-93 (Fed. Cir. 2004)).
The Applicant fails to describe a representative number of plants produced by the claimed methods comprising transforming NNS-2123. The Applicants only provide inbred plants of lettuce variety NNS-2123 with characteristics listed in Tables 1-2 of the specification. Plants produced by the claimed method encompasses an undefined number of possible lettuce plants with varying genotypes and phenotypes which have not been described and were not in the possession of the applicant at the time of filing.
Missing Breeding History
Claims 1-18 are rejected under 35 U.S.C 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The instant Specification fails to satisfy the written description requirement of 35 U.S. Code § 112(a) because it does not provide a description sufficient to conduct an examination, including search of the prior art, nor does it provide enough description to be sufficient to aid in the resolution of questions of infringement.
MPEP 2163 (I) states “The written description of the deposited material needs to be as complete as possible because the examination for patentability proceeds solely on the basis of the written description. See, e.g., In re Lundak, 773 F.2d 1216, 227 USPQ 90 (Fed. Cir. 1985); see also 54 Fed. Reg. at 34,880 ("As a general rule, the more information that is provided about a particular deposited biological material, the better the examiner will be able to compare the identity and characteristics of the deposited biological material with the prior art.").”
MPEP 2163(I) states “The description must be sufficient to permit verification that the deposited biological material is in fact that disclosed. Once the patent issues, the description must be sufficient to aid in the resolution of questions of infringement." Id. at 34,880.)” (Quoting the Deposit of Biological Materials for Patent Purposes, Final Rule, 54 Fed. Reg. 34,864 (August 22, 1989) at 34,880).
In the instant application, a full examination cannot be conducted because applicant failed to provide the breeding history for the instantly claimed plant variety. Applicant claims a new plant variety and methods of producing the variety. A plant variety is defined by both its genetics (breeding history) and its traits. In the instant application, applicant has only provided a description of the plant traits as seen in the specification. The instant application is incomplete as to the breeding history used to produce the claimed plant variety. While Figure 1 provides pedigree information, it is not clear what the source of “NNS line- 000174” is. If this is a proprietary line that has never been publicly available, applicant can indicate this and it will be sufficient to overcome this rejection.
The criticality of a breeding history in assessing the intellectual property rights of a plant is well recognized in the field of plant breeding. With regard to Plant Patents, MPEP 1605 states that a complete detailed description of a plant includes “the origin or parentage”. Other bodies that grant intellectual property protection for plant varieties require breeding information to evaluate whether protection should be granted to new varieties. A breeding history, including information about parentage and breeding methodology, is part of the requirements of Plant Variety Protection (PVP) applications. That information is used to “determine if development is sufficient to consider the variety new” (See “Applying for a Plant Variety Certificate of Protection” by the USDA, Exhibit A). Additionally, the International Union for the Protection of New Varieties of Plants (UPOV) considers breeding history and methodology part of its evaluation of essentially derived plant varieties (See UPOV EDV Explanatory Notes, 14 and 30). While the USPTO, USDA, and UPOV have different laws governing intellectual property rights, all recognize that a breeding history is an essential part of adequate description of the plant sought to be protected.
The breeding history is also necessary to aid in the resolution of patent infringement by providing information necessary to determine whether differences in plants where genetic differences, differences caused by the environment, or differences within the accepted variation within a variety. Historically, the USPTO has considered breeding history information when determining the patentability of a new plant variety. (See Ex Parte C (USPQ 2d 1492 (1992) and Ex Parte McGowen- Board Decision in Application 14/996,093). In both of these cases, there were many differences cited by the applicant when comparing the prior art and the new plant variety. However, because the breeding history was available, these differences were deemed to be obvious and within the natural variation expected in a backcrossing breeding process. Without a breeding history in these cases, a complete comparison with the prior art could not have been possible.
Moreover, a specification lacking a breeding history hampers the public’s ability to resolve infringement analysis with plants already in the prior art as well as plants that have not yet been patented. Because the instant specification lacks the breeding history, the public will not be able to fully resolve questions of infringement. Since the breeding history, including the parents, is not known to the public, the public could only rely on the phenotypes of the claimed plants for assessing potential infringement.
As seen above in Ex Parte C and Ex Parte McGowan, a trait table is insufficient to differentiate varieties by itself. It has been long established that intracultivar heterogeneity exists in crop species. Haun teaches that the assumption that elite cultivars are composed of relatively homogenous genetic pools is false. (See Haun, Page 645, left column). Segregation, recombination, DNA transposition, epigenetic processes, and spontaneous mutations are some of the reasons elite cultivar populations will maintain some degree of plant-to-plant variation. (See Haun, Page 645 right column and Page 646 left column). In addition to genetic variation, environmental variation may lead to phenotypic variation within a cultivar. (See Großkinsky, page 5430 left column 1st full paragraph and right column 2nd full paragraph). In view of this variability, a breeding history is an essential and the least burdensome way to provide genetic information needed at adequate describe a newly developed plant.
Thus, an application that does not clearly describe the breeding history does not provide an adequate written description of the invention.
To overcome this rejection, applicant must amend the specification/drawing to provide the breeding history used to develop the instant variety or cultivar. When identifying the breeding history, applicant should identify any and all other potential names for all parental lines utilized in the development of the instant variety. For example, if applicant’s breeding history uses proprietary line names, applicant should notate in the specification all other names of the proprietary lines, especially publicly disclosed or patented line information. If the breeding history encompasses a locus conversion or a backcrossing process, applicant should clearly indicate the recurrent parent and the donor plant and specifically name the trait or transgenic event that is being donated to the recurrent parent. If one of the parents is a backcross progeny or locus converted line of a publicly disclosed line, applicant should provide the breeding history of the parent line as well (i.e. grandparents).
Applicant is also reminded that they have a duty to disclose information material to patentability. Applicant should also notate the most similar plants which should include any other plants created using similar breeding history (such as siblings of the instant variety). This information can be submitted in an IDS with a notation of the relevancy to the instant application or as information submitted as described in MPEP 724 (e.g., trade secret, proprietary, and Protective Order).
Biological Deposit
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 1-18 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the enablement requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to enable one skilled in the art to which it pertains, or with which it is most nearly connected, to make and/or use the invention.
The claims are drawn to plants and seeds of lettuce variety SV2867LG and methods of using said variety in plant breeding to produce progeny.
Since the seed claimed is essential to the claimed invention, it must be obtainable by a repeatable method set forth in the specification or otherwise be readily available to the public. If a seed is not so obtainable or available, a deposit thereof may satisfy the requirements of 35 U.S.C. 112. The specification does not disclose a repeatable process to obtain the exact same seed in each occurrence and it is not apparent if such a seed is readily available to the public. It is noted that Applicant has deposited seeds for lettuce variety SV2867LG at the ATCC, but there is no indication that the deposit was made and accepted under the Budapest Treaty, or if not under the Budapest Treaty – proof of viability is required, and there is no affirmative statement in the specification that all restrictions upon availability to the public will be irrevocably removed upon issuance for the enforceable life of the patent.
If the deposit of these seeds is made under the terms of the Budapest Treaty, then an affidavit or declaration by the Applicant, or a statement by an attorney of record over his or her signature and registration number, stating that the seeds will be irrevocably and without restriction or condition released to the public upon the issuance of a patent or a statement that all requirements under 37 CFR 1.801-1.809 will be complied with would satisfy the deposit requirement made herein.
Currently, there are seven Budapest Treaty International Depositary Authorities (IDAs) that accept seeds for deposit. Of those seven, the American Type Culture Collection (ATCC), which is one of the largest IDAs, has in the past, required 2,500 seeds for deposit. Effective January 1, 2019, ATCC reduced the number of seeds required for patent seed deposits to 25 packets of 25 seeds for deposit, for a total of 625 seeds. It should be noted, however, that although a deposit of 625 seeds is compliant for submission to ATCC, other IDAs may have different minimum requirements. Accordingly, any depositor should confirm that the number submitted to a specific IDA complies with that IDA’s requirements for seed deposits.
If the deposit has not been made under the Budapest Treaty, then in order to certify that the deposit meets the requirements set forth in 37 CFR 1.801-1.809, Applicant may provide assurance of compliance by an affidavit or declaration, or by a statement by an attorney of record over his or her signature and registration number showing that:
(a) during the pendency of the application, access to the invention will be afforded to the Commissioner upon request;
(b) all restrictions upon availability to the public will be irrevocably removedupon granting of the patent for the enforceable life of the patent in accordance with 37 CFR § 1.808(a)(2);(c) the deposit will be maintained in a public depository for a period of 30 years or 5 years after the last request or for the enforceable life of the patent, whichever is longer; and
(d) the viability of the biological material at the time of deposit will be tested (see 37 CFR 1.807).
In addition, the identifying information set forth in 37 CFR 1.809(d) should be added to the specification, if not already present. See 37 CFR 1.801 - 1.809 (MPEP §§ 2401 -2411) for additional explanation of these requirements.
The application is missing the elements of a statement that the deposit must be made and accepted under the Budapest Treaty or the results of a viability test must be provided. A viability statement is not provided by the applicant and paragraph [0094] does not provide the statement that the deposit is made and accepted under the Budapest Treaty.
Additionally, a statement, affidavit of declaration by Applicant, or a statement by an attorney of record over his or her signature and registration number, or someone empowered to make such a statement, stating that the instant invention will be irrevocably and without restriction released to the public upon issuance of a patent for the enforceable life is also required but currently lacking from paragraph [0094].
Closest prior art
Claims 1-18 are free of the prior art, given the failure of the prior art to teach or suggest a lettuce plant having all of the morphological and physiological characteristics of the deposited variety. The closest prior art is lettuce variety Toro (US 20220272924). The instantly claimed variety is different from Toro in at least mature plant: head formation and diameter (Table 1).
Conclusions
Claims 1-18 are rejected.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to DAVID R BYRNES whose telephone number is (571)270-3935. The examiner can normally be reached 9:00 - 5:00 M-F.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Joe Zhou can be reached on (571) 272-0724. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/DAVID R BYRNES/Examiner, Art Unit 1662