Detailed Action
The present application, filed on or after March 16, 2013, is being examined under the first inventor to file provisions of the AIA .
Claims 1-9 and 13-18 are examined.
Specification
The Specification is objected to for reciting blanks where the deposit number and date of deposit should be listed (paragraph [0196]).
Claim Rejections - 35 USC § 112
Indefiniteness
The following is a quotation of 35 U.S.C. 112(b):
(b) CONCLUSION.—The specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the inventor or a joint inventor regards as the invention.
Claims 1-9 and 13-18 are rejected under 35 U.S.C. 112(b) or 35 U.S.C. 112 (pre-AIA ), second paragraph, as being indefinite for failing to particularly point out and distinctly claim the subject matter which the inventor or a joint inventor, or for pre-AIA the applicant regards as the invention.
Claims 1, 13, 16, and 18 recite the name ‘E01G11679’, which renders the claims indefinite because this is not an art accepted name. Perfecting the deposit as indicated below would obviate this issue.
Claims 1, 16 and 18 recite “NCIMB Accession Number X4,” which renders the claims indefinite because a common name of a variety without a corresponding deposit number the accession number makes the metes and bounds of the claims unclear. One of ordinary skill in the art would recognize that common variety names are arbitrary designations that can change over time. Replacing “X4” with the number when it is available to the applicant would obviate this issue.
The dependent claims are included in the rejection because they fail to recite additional limitations that would overcome the indefiniteness of claim 1.
Missing Breeding History
The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
(a) IN GENERAL.—The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor or joint inventor of carrying out the invention.
The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
The specification shall contain a written description of the invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and shall set forth the best mode contemplated by the inventor of carrying out his invention.
Claims 1-9 and 13-18 are rejected under 35 U.S.C 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the written description requirement. The instant Specification fails to satisfy the written description requirement of 35 U.S. Code § 112(a) because it does not provide a description sufficient to conduct an examination, including search of the prior art, nor does it provide enough description to be sufficient to aid in the resolution of questions of infringement.
MPEP 2163 (I) states “The written description of the deposited material needs to be as complete as possible because the examination for patentability proceeds solely on the basis of the written description. See, e.g., In re Lundak, 773 F.2d 1216, 227 USPQ 90 (Fed. Cir. 1985); see also 54 Fed. Reg. at 34,880 ("As a general rule, the more information that is provided about a particular deposited biological material, the better the examiner will be able to compare the identity and characteristics of the deposited biological material with the prior art.").”
MPEP 2163(I) states “The description must be sufficient to permit verification that the deposited biological material is in fact that disclosed. Once the patent issues, the description must be sufficient to aid in the resolution of questions of infringement." Id. at 34,880.)” (Quoting the Deposit of Biological Materials for Patent Purposes, Final Rule, 54 Fed. Reg. 34,864 (August 22, 1989) at 34,880).
In the instant application, a full examination cannot be conducted because applicant failed to provide the breeding history for the instantly claimed plant variety. Applicant claims a new plant variety and methods of producing the variety. A plant variety is defined by both its genetics (breeding history) and its traits. In the instant application, applicant has only provided a description of the plant traits as seen in the specification. The instant application is incomplete as to the breeding history used to produce the claimed plant variety.
The criticality of a breeding history in assessing the intellectual property rights of a plant is well recognized in the field of plant breeding. With regard to Plant Patents, MPEP 1605 states that a complete detailed description of a plant includes “the origin or parentage”. Other bodies that grant intellectual property protection for plant varieties require breeding information to evaluate whether protection should be granted to new varieties. A breeding history, including information about parentage and breeding methodology, is part of the requirements of Plant Variety Protection (PVP) applications. That information is used to “determine if development is sufficient to consider the variety new” (See “Applying for a Plant Variety Certificate of Protection” by the USDA, Exhibit A). Additionally, the International Union for the Protection of New Varieties of Plants (UPOV) considers breeding history and methodology part of its evaluation of essentially derived plant varieties (See UPOV EDV Explanatory Notes, 14 and 30). While the USPTO, USDA, and UPOV have different laws governing intellectual property rights, all recognize that a breeding history is an essential part of adequate description of the plant sought to be protected.
The breeding history is also necessary to aid in the resolution of patent infringement by providing information necessary to determine whether differences in plants where genetic differences, differences caused by the environment, or differences within the accepted variation within a variety. Historically, the USPTO has considered breeding history information when determining the patentability of a new plant variety. (See Ex Parte C (USPQ 2d 1492 (1992) and Ex Parte McGowen- Board Decision in Application 14/996,093). In both of these cases, there were many differences cited by the applicant when comparing the prior art and the new plant variety. However, because the breeding history was available, these differences were deemed to be obvious and within the natural variation expected in a backcrossing breeding process. Without a breeding history in these cases, a complete comparison with the prior art could not have been possible.
Moreover, a specification lacking a breeding history hampers the public’s ability to resolve infringement analysis with plants already in the prior art as well as plants that have not yet been patented. Because the instant specification lacks the breeding history, the public will not be able to fully resolve questions of infringement. Since the breeding history, including the parents, is not known to the public, the public could only rely on the phenotypes of the claimed plants for assessing potential infringement.
As seen above in Ex Parte C and Ex Parte McGowan, a trait table is insufficient to differentiate varieties by itself. It has been long established that intracultivar heterogeneity exists in crop species. Haun teaches that the assumption that elite cultivars are composed of relatively homogenous genetic pools is false. (See Haun, Page 645, left column). Segregation, recombination, DNA transposition, epigenetic processes, and spontaneous mutations are some of the reasons elite cultivar populations will maintain some degree of plant-to-plant variation. (See Haun, Page 645 right column and Page 646 left column). In addition to genetic variation, environmental variation may lead to phenotypic variation within a cultivar. (See Großkinsky, page 5430 left column 1st full paragraph and right column 2nd full paragraph). In view of this variability, a breeding history is an essential and the least burdensome way to provide genetic information needed at adequate describe a newly developed plant.
Thus, an application that does not clearly describe the breeding history does not provide an adequate written description of the invention.
To overcome this rejection, applicant must amend the specification/drawing to provide the breeding history used to develop the instant variety or cultivar. When identifying the breeding history, applicant should identify any and all other potential names for all parental lines utilized in the development of the instant variety. For example, if applicant’s breeding history uses proprietary line names, applicant should notate in the specification all other names of the proprietary lines, especially publicly disclosed or patented line information. If the breeding history encompasses a locus conversion or a backcrossing process, applicant should clearly indicate the recurrent parent and the donor plant and specifically name the trait or transgenic event that is being donated to the recurrent parent. If one of the parents is a backcross progeny or locus converted line of a publicly disclosed line, applicant should provide the breeding history of the parent line as well (i.e. grandparents).
Applicant is also reminded that they have a duty to disclose information material to patentability. Applicant should also notate the most similar plants which should include any other plants created using similar breeding history (such as siblings of the instant variety). This information can be submitted in an IDS with a notation of the relevancy to the instant application or as information submitted as described in MPEP 724 (e.g., trade secret, proprietary, and Protective Order).
Enablement- Biological Deposit
Claims 1-9 and 13-18 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA ), first paragraph, as failing to comply with the enablement requirement. The claim(s) contains subject matter which was not described in the specification in such a way as to enable one skilled in the art to which it pertains, or with which it is most nearly connected, to make and/or use the invention.
The claims are drawn to seeds and plants of lettuce variety ‘E01G11679’.
Since the seed claimed is essential to the claimed invention, it must be obtainable by a repeatable method set forth in the specification or otherwise be readily available to the public. If a seed is not so obtainable or available, a deposit thereof may satisfy the requirements of 35 U.S.C. 112. The specification does not disclose a repeatable process to obtain the exact same seed in each occurrence and it is not apparent if such a seed is readily available to the public. It is noted that Applicant intends to deposit seeds for E01G11679 at the NCIMB, but there is no indication that the seeds have been deposited and there is no affirmative statement in the specification that all restrictions upon availability to the public will be irrevocably removed upon issuance for the enforceable life of the patent. See page 49 of the specification.
If the deposit of these seeds is made under the terms of the Budapest Treaty, then an affidavit or declaration by the Applicant, or a statement by an attorney of record over his or her signature and registration number, stating that the seeds will be irrevocably and without restriction or condition released to the public upon the issuance of a patent or a statement that all requirements under 37 CFR 1.801-1.809 will be complied with would satisfy the deposit requirement made herein. A deposit of 2500 seeds is considered sufficient in the ordinary case to assure availability through the period for which a deposit must be maintained.
If the deposit has not been made under the Budapest Treaty, then in order to certify that the deposit meets the requirements set forth in 37 CFR 1.801-1.809, Applicant may provide assurance of compliance by an affidavit or declaration, or by a statement by an attorney of record over his or her signature and registration number showing that:
(a) during the pendency of the application, access to the invention will be afforded to the Commissioner upon request;
(b) all restrictions upon availability to the public will be irrevocably removedupon granting of the patent for the enforceable life of the patent in accordance with 37 CFR § 1.808(a)(2);(c) the deposit will be maintained in a public depository for a period of 30 years or 5 years after the last request or for the enforceable life of the patent, whichever is longer; and
(d) the viability of the biological material at the time of deposit will be tested (see 37 CFR 1.807).
In addition, the identifying information set forth in 37 CFR 1.809(d) should be added to the specification. See 37 CFR 1.801 - 1.809 [MPEP 2401-2411.05] for additional explanation of these requirements.
In paragraph [0196], the applicant has recited “DATE” where the date that the seeds were deposited should be provided and “NCIMB Number X4” where the deposit accession number should be provided. The applicant should amend the Specification to recite that all restrictions upon availability to the public will be irrevocably removed upon granting of the patent for the enforceable life of the patent in accordance with 37 CFR § 1.808(a)(2).
Therefore, the applicant has not satisfied the enablement requirement.
Closest prior art
Claims 1-9 and 13-18 are provisionally free of the prior art, given the failure of the prior art to teach or suggest a lettuce plant having all of the morphological and physiological characteristics of the deposited variety. It should be noted that this statement is based only on a comparison of the morphological and physiological characteristics of the deposit against the prior art. This is because the applicant has not provided any information regarding the parental lineage or breeding methodology used to produce the deposited lettuce variety E01G11679. Without this information, a meaningful comparison of the genetic basis that would distinguish the deposited lettuce variety from prior art plants cannot be made.
The closest prior art is Sousa (US20190090447), which discloses lettuce cultivar m8515. Lettuce cultivar m8515 shares many of the same characteristics as E01G11679 but differs in at least apical margin and cupping. Therefore, the plants are distinct varieties.
Conclusion
Claims 1-9 and 13-18 are rejected.
Any inquiry concerning this communication or earlier communications from the examiner should be directed to DAVID R BYRNES whose telephone number is (571)270-3935. The examiner can normally be reached 9:00 - 5:00 M-F.
Examiner interviews are available via telephone, in-person, and video conferencing using a USPTO supplied web-based collaboration tool. To schedule an interview, applicant is encouraged to use the USPTO Automated Interview Request (AIR) at http://www.uspto.gov/interviewpractice.
If attempts to reach the examiner by telephone are unsuccessful, the examiner’s supervisor, Bratislav Stankovic can be reached at (571) 270-0305. The fax phone number for the organization where this application or proceeding is assigned is 571-273-8300.
Information regarding the status of published or unpublished applications may be obtained from Patent Center. Unpublished application information in Patent Center is available to registered users. To file and manage patent submissions in Patent Center, visit: https://patentcenter.uspto.gov. Visit https://www.uspto.gov/patents/apply/patent-center for more information about Patent Center and https://www.uspto.gov/patents/docx for information about filing in DOCX format. For additional questions, contact the Electronic Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a USPTO Customer Service Representative, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
/DAVID R BYRNES/Examiner, Art Unit 1662